Physicochemical studies of molecular hyperpolarizability of imidazole derivatives

A series of substituted imidazoles have been synthesized in very good yield under solvent free condition by grinding 1,2-diketone, arylaldehyde, arylamine and ammonium acetate in the presence of molecular iodine as the catalyst. The short reaction time, good yield and easy workup make this protocol practically and economically attractive and the imidazoles are characterized by NMR spectra, X-ray, mass and CHN analysis. The push-pull character of series of imidazoles have been analyzed by the quotient of the occupations of the bonding (π) and anti-bonding (π*) orbitals of the central linking -N=C-C=C- unit. Excellent correlation of the push-pull parameter with the corresponding bond lengths d(CN) and d(CC) strongly recommend both the occupation quotients (π*/π) and the corresponding bond lengths are reasonable sensors for quantifying the push-pull character and for the molecular hyperpolarizability ?(0) of these compounds. To support the experimental results, theoretical calculations (heat of formation, NLO, NBO and vibrational analysis) were also made. Within this context, reasonable conclusions concerning the steric hindrance in the chromospheres, push-pull character, hyperpolarizability of the imidazoles and their application as NLO materials will be drawn.     

Highly selective, sensitive and quantitative detection of Hg2+ in aqueous medium under broad pH range

Amidothiourea linked acridinedione derivatives selectively detect Hg(2+) in unbuffered aqueous solution under broad pH range with both single- and two-photon excitation. The observed linear fluorescence intensity change allows the quantitative detection of Hg(2+) in the concentration range of 22 nM-0.33 μM with the lower detection limit of 2 nM.     

Droplet synthesis of well-defined block copolymers using solvent-resistant microfluidic device

Well-defined diblock copolymers were synthesized via an exothermic RAFT route by a droplet microfluidic process using a solvent-resistant and thermally stable fluoropolymer microreactor fabricated by a non-lithographic embedded template method. The resulting polymers were compared to products obtained from continuous flow capillary reactor and conventional bulk synthesis. The droplet based microreactor demonstrated superior molecular weight distribution control by synthesizing a higher molecular weight product with higher conversion and narrow polydispersity in a much shorter reaction time. The high quality of the as-synthesized block copolymer PMMA-b-PS led to a generation of micelles with a narrow size distribution that could be used as a template for well-ordered mesoporous silica with regular frameworks and high surface areas.     

SYNTHESIS,NMR AND MOLECULAR MODELING STUDY OF 4,9a-DIARYL-9,9a-DIHYDRO 1H-[1,4]THIAZINO[4,3-a][1,3]BENZIMIDAZOLES

A series of substituted 4,9a-diaryl-9,9a-dihydro-1H-[1,4]thiazino[4,3-a][1,3]benzimidazoles was prepared in good yields from the reaction of bis(aroylmethyl) sulfides with ortho-phenylenediamine in glacial acetic acid under reflux and under microwave irradiation. Microwave irradiation is found to accelerate the reaction, besides giving better yield in the case of the thiazinobenzimidazoles with electron-withdrawing groups in the aryl rings than the thermal reaction.     

金催化的环化反应与钯催化的炔醇偶联/环化反应相结合用于合成多取代呋喃衍生物:串联反应的应用范围(英文)

开发了一种由金和钯催化π-活化由炔醇合成呋喃衍生物的集成方法.该合成策略是最显著的特点适用于带环辛基的底物,其适用范围比之前报道的有很大扩展.在Sonogashira反应条件下,由相应底物可直接得到环辛基呋喃.Pd在这些反应中起到2个重要作用:底物发生偶联反应的关键催化剂;通过π-活化促进炔醇中间体成环反应.该方法在一步合成3-碘呋喃反应中作用很突出,使通过偶联法进一步官能团化成为可能.我们还将AuBr_3用于多米诺成环/C-H键活化反应和无环前体的成环反应.本文结果表明,在该类成环反应中金和钯催化剂相辅相成.     

Synthesis and photoluminescence properties of some novel fluorenophanes

Fluorenophanes derived from 2,7-bis-(bromomethyl)-9,9′-diheptyl-9H-fluorene and various diols exhibit excellent photoluminescence properties.     

Triphase catalysis. I. Kinetics and mechanism of alkylation of phenylacetonitrile with alkyl halides catalyzed by aqueous naoh and polymer-supported benzyltriethylammonium chloride

The alkylation and cycloalkylation of phenylacetonitrile (PAN) with excess of 1-bromobutane and 1,4-dibromobutane respectively catalyzed by aqueous NaOH and insoluble polystyrene-bound benzyltriethylammonium chloride were studied and the rates depend upon several experimental parameters. The rate of cycloalkylation of PAN is five times faster than the alkylation and the former proceeds even in the absence of the solid catalyst. Both alkylation and cycloalkylation gave higher rates in reverse addition method than in direct addition. Deprotonation of PAN by hydroxide ion takes place without participation of the polymeric catalyst. The electrostatic force between the positive charge on the nitrogen atom of catalyst and carbanion is responsible for alkylation of active nitrile with polystyrene-bound phase-transfer catalyst. The rates of both the reactions increase with increased stirring speed, ring substitution, hydroxide ion concentration and catalyst amount and decrease with increased particle size and the degree of cross-linking of the polymer. Apparent activation energies for the reactions were calculated. The kinetic results are discussed in terms of mass transfer and a combination of intraparticle diffusion and intrinsic reactivity limitations of the rates.     

Diglycidyl ether of bisphenol-A epoxy resin–polyether sulfone/polyether sulfone ether ketone blends: phase morphology, fracture toughness and thermo-mechanical properties

The properties of diglycidyl ether of bisphenol-A epoxy resin toughened with poly(ether sulfone ether ketone) (PESEK) and poly(ether sulfone) (PES) polymers were investigated. PESEK was synthesised by the nucleophilic substitution reaction of 4,4’-difluorobenzophenone with dihydroxydiphenylsulfone using sulfolane as solvent and potassium carbonate as catalyst at 230 °C. The T _g–composition behaviour of the homogeneous epoxy resin/PESEK blend was modelled using Fox, Gordon–Taylor and Kelley–Bueche equations. A single relaxation near the glass transition of epoxy resin was observed in all the blend systems. From dynamic mechanical analysis, the crosslink density of the blends was found to decrease with increase in the thermoplastic concentration. The storage modulus of the epoxy/PESEK blends was lower than that of neat resin, whilst it is higher for epoxy/PES blends up to glass transition temperature, thereafter it decreases. Scanning electron microscopic studies of the blends revealed a homogeneous morphology. The homogeneity of the blends was attributed to the similarity in chemical structure of the modifier and the cured epoxy network and due to the H-bonding interactions between the blend components. The fracture toughness of epoxy resin increased on blending with PESEK and PES. The increase in fracture toughness was due to the increase in ductility of the matrix. The thermal stability of the blends was comparable to that of neat epoxy resin.     

A mild, efficient and improved protocol for the synthesis of novel indolyl crown ethers, di(indolyl)pyrazolyl methanes and 3-alkylated indoles using H4[Si(W3O10)3]

Efficient electrophilic substitution reactions of indoles with various aldehydes proceed smoothly in acetonitrile using heteropoly acid (H₄[Si(W₃O₁₀)₃]) to afford the corresponding new indolyl crown ethers and di(indolyl)pyrazolyl methanes. H₄[Si(W₃O₁₀)₃] is also found to catalyze the Michael addition of indoles to ,β-unsaturated compounds for the synthesis of 3-alkylated indoles.