催化动力学光度法测定痕量铝

痕量铝在硝酸介质中能催化加速过氧化氢和高碘酸钾与二甲苯胺兰FF之间的褪色反应。研究了反应的最佳实验条件,建立了测定痕量铝的新方法。方法检出限为6.1×10-10gAl3+/mL,检测范围为0-1.0μgAl3+/25mL。本方法具有高灵敏度,选择性较好,操作简便,快速的特点。用以测定水样中的痕量铝,获得满意结果。     

用力敏传感器测量乙醇水溶液的表面张力系数与浓度的关系

用硅压阻式力敏传感器测量了纯水、乙醇的表面张力系数，并测量了不同浓度的乙醇水溶液的表面张力系数，得到了乙醇水溶液的表面张力系数随浓度的变化曲线．     

具有时滞的非自治的捕食-食饵系统的全局吸引

考虑一个具有离散时滞的非自治的捕食—食饵系统。系统是由3种群组成的，其中一个为捕食者，另两个为食饵种群。本文的目的是给出时滞对系统的持续生存是无害的，从而确定了系统的周期解全局吸引的条件。     

Annealing behavior of gel‐spun polyethylene fibers at temperatures lower than needed for significant shrinkage

The annealing at 373 K of ultrastrong, gel‐spun polyethylene (PE) has been studied. At this temperature, the fibers show no significant shrinkage. Still, a significant decrease in the mechanical properties is observed. The fibers have been analyzed with differential scanning calorimetry (DSC), temperature‐modulated differential scanning calorimetry (TMDSC), atomic force microscopy (AFM), and small‐angle X‐ray scattering (SAXS). During the annealing, the glass transition of the intermediate phase is exceeded, as shown by DSC. When split for structure analysis by AFM, the annealed fibers undergo plastic deformation around the base fibrils instead of brittle fracture. The quasi‐isothermal TMDSC experiments are compared to the minor structural changes seen with SAXS and AFM. The loss of performance of the PE fibers at 373 K is suggested to be caused by the oriented intermediate phase, and not by major changes in the structure or morphology. The overall metastable, semicrystalline structure is shown by TMDSC to posses local regions that can melt reversibly. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 403–417, 2003     

拟线性双曲方程组一类广义Riemann问题的整体间断解

对一阶拟线性双曲方程组一类广义Riemann问题，该文在一定条件下证明了，包含一个接触间断和一个中心波以及包含一个接触间断和一个激波的间断解的整体存在性和唯一性.     

Activation and Afterheat Calculation Analysis for TBM

Safety considerations of TBM are part of the design process to ensure that the TBM do not adversely affect the safety of ITER. So accurate calculations of all radioactivity and potential harmfulness are very important for designing of device, selecting of blanket and shield material, analyzing of the safety and environment, disposing of nuclear waste and operation of the reactor.     

Towards the Exact Minimization of BDDs—An Elitism-Based Distributed Evolutionary Algorithm

Binary Decision Diagrams (BDDs) are the state-of-the-art data structure for representation and manipulation of Boolean functions. In general, exact BDD minimization is NP-complete. For BDD-based technology, a small improvement in the number of nodes often simplifies the follow-up problem tremendously. This paper proposes an elitism-based evolutionary algorithm (EBEA) for BDD minimization. It can efficiently find the optimal orderings of variables for all LGSynth91 benchmark circuits with a known minimum size. Moreover, we develop a distributed model of EBEA, DEBEA, which obtains the best-ever variable orders for almost all benchmarks in the LGSynth91. Experimental results show that DEBEA is able to achieve super-linear performance compared to EBEA for some hard benchmarks.     

稀土配合物Eu(asprin)_3phen发光特性的研究

将稀土配合物Eu(asprin)_3phen掺杂到导电聚合物PVK中,制成结构分别为ITO/PVK:RE配合物/LiF/AI(1),ITO/PVK:RE配合物/PBD/LiF/AI(2)的电致发光(EL)器件。发现二者的电致发光谱存在着较大的差别:在器件(1)中,来自Eu~(3 )的位于594nm(~5D_0→~7F_1)和614nm(~5D_0→~7F_2)处的发光强度大致相当,而在器件(2)中,EL主要来自Eu~(3 )位于614nm的发光,594nm处的发光很弱,与薄膜状态下的光致发光谱(PL)一致。并针对此现象进行了初步讨论。     

Analysis of CCD moiré pattern for micro-range measurements using the wavelet transform

A new approach based on the moiré theory and wavelet transform (WT) is proposed for measuring the micro-range distance between a charge-couple-device (CCD) camera and a two-dimensional reference grating. The micro-range distance is determined by measuring the pitch of the moiré pattern image, which is digitized by a CCD camera. A one-dimensional WT algorithm is applied to estimate the pitch of the moiré pattern. Experimental results prove that this technique is very efficient and highly accurate. The moiré range finder is an economic technique for measuring a micro-range distance.     

低进汽压力下超音速两相流升压特性实验研究

本文采用实验方法研究了进汽压力为0.2 MPa以下时,由蒸汽喷嘴、混合腔及相应的阀门和管道组成超音速汽液两相流升压加热装置的运行特性。实验表明在进汽压力为0.1 MPa-0.2 MPa时,超音速汽液两相流升压加热装置都可稳定可靠地运行,且升压效果明显,可满足电力、供暖、轻工等许多行业蒸汽加热的要求。