不同部分进汽度及不同堵塞方式情况下的动叶片性能

本文对不同部分进汽度及不同堵塞方式情况下的调节级动叶片效率、流量和叶片升力等总体性能作了分析和总结,这些结果将对调节级动叶片的设计提供极为宝贵的参考。     

Properties of Dihadron Correlations for p＋p Collisions at √8NN = 200 GeV

The dihadron azimuthal angular correlations for p＋p collisions at √8NN = 200 GeV are simulated by a multiphase transport model. The dispersions of near-side and away-side peaks, indicated by the width of Gaussian fit functions and the rms width, decrease with the transverse momentum of associated particles. This trend is consistent with the experimental results. Conditional-yields are also calculated to obtain distributions of the associated particle transverse momentum for both away-side and near-side. Furthermore, the hadronic rescattering effects make the conditional-yield distributions softer.     

基于FPGA的PLC并行执行定时器/计数器的设计

针对ARM+FPGA构建的PLC系统,分析PLC对定时器/计数器的功能需求,设计了可以并行执行的定时器/计数器,构建的定时器/计数器共用一个端口读写控制器与FPGA中央控制器进行数据通信,定时器/计数器内部工作是相互独立的,能够并行的工作,并通过使用地址映射存储器使得定时器/计数器的指令执行更加高效。对中央控制器与定时器/计数器的通信时序和通信格式进行了设计,方便了中央控制器对定时器/计数器的控制与测试。通过仿真测试,该定时器/计数器能够满足PLC定时器/计数器的基本功能,并且达到了稳定的定时/计数的设计要求。     

胶体水相法制备高量子产率及高稳定性的水溶性ZnSe量子点

采用简便的胶体水相法制备了高荧光强度且稳定性良好的ZnSe量子点(ZnSe QDs),克服了以往水相合成法稳定性差、量子产率低等缺陷。优化后的最佳合成条件为：以还原型L-谷胱甘肽作为稳定剂,L-谷胱甘肽∶Se2-∶Zn2+摩尔比为5∶1∶5,介质pH 10.5,反应温度在90～100 ℃之间。且合成后不需要采取任何光照后处理,ZnSe QDs的量子产率(QYs) 即可高达50.1%,放置3个月后荧光强度基本不变,水溶性优良。用紫外-可见分光光度法(UV-Vis)、荧光分光光度法(FL)、透射电子显微镜(TEM)等分析检测手段,对得到的ZnSe QDs的性能进行表征。合成的量子点在300 nm激发下发蓝紫色荧光(370 nm),其优良的光化学特性将有利于其在光热器件的制造及化学生物领域的应用。     

Investigation of the Potts Model on Triangular Lattices by the Second Renormalization of Tensor Network States

We employ the second renormalization group method of tensor-network states to investigate thermodynamic properties of the ferromagnetic and antiferromagnetic Potts model on triangular lattices. From the temperature dependence of the internal energy and the specific heat, both the critical temperatures and critical exponents are evaluated. For the q = 3 antiferromagnetic Potts model, the critical temperature is found to be Tc = 0.627163±0.000003, which is at least one order of magnitude more accurate than that obtained by other methods.     

Composition-Dependent Characterization of Sb2Te3 Thin Films Prepared by Ion Beam Sputtering Deposition

The optimization of ion beam sputtering deposition process for Sb2 Te3 thin films deposited on BK7 glass substrates is reported. The influence of composition ratio on the thermoelectric properties is investigated. X-ray diffraction shows that the major diffraction peaks of the films match with those of Sb2 Te3. Hall effect and Seebeck coefficient measurement reveal that all the samples are of p-type. The Sb2 Te3 thin films exhibit the Seebeck coefficient of 190μVk^-1 and the electrical conductivity of 1.1 × 10^3 Scm^-1 when the atomic ratio of Sb to Te is 0.65. Carrier concentration and motility of the films increase with the increasing atomic ratio of Sb to Te. The Sb2 Tea film with a maximum power factor of 2.26×10^-3 Win^-1K^-2 is achieved when annealed at 400℃. Raman measurement shows that the main peaks are at about 120 cm^-1, 252 cm^-1 and 450 cm^-1, in agreement with those of V-VI compound semiconductors.     

Strange quark dynamics on hot dense matter under the extreme condition

Production and properties of φ-meson under the extreme hot dense matter which is formed in Au ＋ Au collisions at RHIC energy have been briefly reviewed.The issues are focused on transverse momentum （p T ） spectra of φ,elliptic flow of φ,nuclear modification factor of φ,the ratio of Ω（p T ）/φ（p T ） versus p T,the ratio of Ω（p T /3）/φ（p T /2） versus p T /n q,spin alignment of φ and the enhancement of φ etc.These observables give the significant information of the strange quark dynamics in hot dense matter under the extreme condition.     

用于混响中信号检测的空时预白化处理器

提出了一种新型的空时预白化处理器用于抑制混响,它是基于二维自回归模型的。这种处理器将接收到的数据从空间和时间上联合进行处理,进而分离目标回波和混响。这种方法较传统的从空间和时间上分别进行处理的方法能够更有效的抑制混响。通过与传统的一维自回归预白化处理器相比较,使用空时预白化处理器后的检测效果提高了约9~11 dB。     

应用CASSCF方法精确计算OH分子A~2∑~+态势能曲线

应用Gaussian03程序包中提供的完全活性空间自洽场(CASSCF)方法,采用多种标准基组对OH分子A~2∑~+态的几何结构进行了优化和势能曲线计算、并将计算结果拟合成了解析的Murrell-Sorbie函数.利用得到的解析势能函数进一步计算了该态的光谱常数,并与实验结果进行了比较.此外,本文还给出了一种新的活性空间的选择方法.     

新型MOLEDs的光学性能

将负折射率介质层(NRIDL)引入到微腔有机电致发光器件(MOLEDs)中,设计了新型的微腔器件。利用传输矩阵法对此器件的反射率大小、器件厚度对发射峰的影响以及电致发光(EL)光谱性质进行了分析和讨论。结果表明:与普通微腔器件相比,新型微腔器件的谱线宽度显著窄化,峰值强度明显增强,并且受腔体长度的影响较小。这些结果为进一步提高微腔器件的发光色纯度、薄化器件厚度提供了新方法。