A Furan-based Phosphaphenanthrene-containing Derivative as a Highly Efficient Flame-retardant Agent for Epoxy Thermosets without Deteriorating Thermomechanical Performances

In order to reduce greenhouse gas emissions, developing flame retardants from bio-based resources has aroused extensive interest in recent years. In this work, we utilized furfural(biomass) and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide(DOPO) to synthesize a biobased co-curing agent(FGD) to combine with 4,4'-diaminodiphenyl methane(DDM) for obtaining a low-phosphorus loading flame-retardant epoxy thermosets. The introduction of FGD decreased the activation energy of the curing progress, enhanced the mechanical properties of the epoxy thermosets, and did not affect the glass transition temperature of the epoxy thermosets. EP-5.0 had a lower thermal degradation rate and a doubled char yield compared with EP-0. The phosphorus content of EP-5.0 was only 0.45 wt%, while EP-5.0 reached the UL-94 V-0 rating with a high LOI value of 32%. Compared with EP-0, the PHRR of EP-2.5 and EP-5.0 decreased by 22.3% and 31.3%, respectively. The SEM results showed that the addition of FGD made the char residues more uniform and denser, which could effectively prevent combustible volatiles from escaping from the degradation area to the flame area and isolate the heat transfer so that the epoxy thermosets had an excellent flame-retardant performance.     

The Comparative Study of Reaction Mechanisms and Catalytic Performances of Cu–SSZ-13 and Fe–SSZ-13 for the NH3-SCR Reaction

Catalysis Surveys from Asia - The catalytic performances and mechanism differences of model catalysts Cu–SSZ-13 and Fe–SSZ-13 with similar metal content and Si/Al ratio were compared....     

Patterning of MgO epitaxial films on LaAlO3 substrate using photosensitive sol-gel method

Journal of Sol-Gel Science and Technology - Herein, the chelated precursor solution (Mg/BzAc) was synthesized using magnesium acetate as raw material and benzoylacetone as chemical modifier. The...     

In situ synthesis of CdS/ZnS composite nanoparticles from ZIF-8 for visible light disposal of Cr(VI)

Journal of Sol-Gel Science and Technology - Zeolitic Imidazolate Framework (ZIF-8) micropolyhedra were employed as a raw material for the synthesis of fine cadmium sulfide/zinc sulfide (CdS/ZnS)...     

A Supercharged Fluorescent Protein as a Versatile Probe for Homogeneous DNA Detection and Methylation Analysis

Supercharged proteins are a new class of functional proteins with exceptional stability and potent ability to deliver bio‐macromolecules into cells. As a proof‐of‐principle, a novel application of supercharged proteins as a versatile biosensing platform for nucleic acid detection and epigenetics analysis is presented. Taking supercharged green fluorescent protein (ScGFP) as the signal reporter, a simple turn‐on homogenous method for DNA detection has been developed based on the polyionic nanoscale complex of ScGFP/DNA and toehold strand displacement. This assay shows high sensitivity and potent ability to detect single‐base mismatch. Furthermore, combined with bisulfite conversion, this ScGFP‐based assay was further applied to analyze site‐specific DNA methylation status of genomic DNA extracted from real human colon carcinoma tissue sample with ultrahigh sensitivity (4 amol methylated DNA).     

The morphologies and optoelectronic properties of delafossite CuFeO2 thin films prepared by PEG assisted sol–gel method

Single phase delafossite CuFeO₂ thin films were synthesized by a simple sol–gel method. The influence of polyethylene glycol (PEG) on the morphology and optoelectronic properties of the films was studied by addition of 1.0 g PEG in 10 ml precursor solution. The crystal sizes of the derived CuFeO₂ films with and without addition of PEG were 49 nm, but the sample with addition of PEG (labeled as CFO-PEG) showed weaker c-axis orientation growth. The sample without addition of PEG (labeled as CFO) showed a compact surface without detectable pores and had a thickness around 50 nm. However, the sample CFO-PEG exhibited a porous surface with worm-like grains in nanometric scale and had a thickness around 310 nm. Enhanced absorbance in UV–vis region was observed for the sample CFO-PEG which might ascribe to both the thickness and porous surface. The optical direct bandgaps at near-UV were estimated to be ~3.0 and 3.38 eV for the sample CFO-PEG and CFO, respectively. Though the porous surface of CFO-PEG has improved the absorbance in UV–vis region, the resistivity has also been increased due to the homogeneous distribution of interspaces between the worm-like grains, which makes the incident photon to current efficiency of CFO-PEG lower than that of CFO.     

Synthesis,crystal structure and optical property of manganese (II) halides based on pyridine ionic liquids with high quantum yield

Transition Metal Chemistry - Two novel tetrahedral Mn (II) halide single-crystals [(C7H10N)2][MnCl4] (1) and [(C7H10N)2][MnBr4] (2), based on pyridine ionic liquids, have been successfully...     

Multiple Stimuli-Responsive Conformational Exchanges of Biphen[3]arene Macrocycle

Conformational exchanges of synthetic macrocyclic acceptors are rather fast, which is rarely studied in the absence of guests. Here, we report multiple stimuli-responsive conformational exchanges between two preexisting conformations of 2,2′,4,4′-tetramethoxyl biphen[3]arene (MeBP3) macrocycle. Structures of these two conformations are both observed in solid state, and characterized by ¹H NMR, ¹³C NMR and 2D NMR in solution. In particular, conformational exchanges can respond to solvents, temperatures, guest binding and acid/base addition. The current system may have a role to play in the construction of molecular switches and other stimuli-responsive systems.     

Thermal hazard assessment and ranking for organic peroxides using quantitative structure–property relationship approaches

Journal of Thermal Analysis and Calorimetry - Chemical reactivity hazards of organic peroxides are major concerns of the chemical industry due to many serious incidents every year. Thermal hazard...     

基于快速神经网络架构搜索的鲁棒图像水印网络算法

为解决深度学习在图像水印算法中计算量大且模型冗余的问题,提高图像水印算法在抵抗噪声、旋转和剪裁等攻击时的鲁棒性,提出基于快速神经网络架构搜索（neural architecture search,NAS）的鲁棒图像水印网络算法。通过多项式分布学习快速神经网络架构搜索算法,在预设的搜索空间中搜索最优网络结构,进行图像水印的高效嵌入与鲁棒提取。首先,将子网络中线性连接的全卷积层设置为独立的神经单元结构,并参数化表示结构单元内节点的连接,预先设定结构单元内每个神经元操作的搜索空间;其次,在完成一个批次的数据集训练后,依据神经元操作中的被采样次数和平均损失函数值动态更新概率;最后,重新训练搜索完成的网络。水印网络模型的参数量较原始网络模型缩减了92%以上,大大缩短了模型训练时间。由于搜索得到的网络结构更为紧凑,本文算法具有较高的时间性能和较好的实验效果,在隐藏图像时,对空域信息的依赖比原始网络更少。对改进前后的2个网络进行了大量鲁棒性实验,对比发现,本文算法在CIFAR-10数据集上对抵抗椒盐噪声和旋转、移除像素行（列）等攻击优势显著;在ImageNet数据集上对抵抗椒盐高斯噪声、旋转、中值滤波、高斯滤波、JPEG压缩、裁剪等攻击优势显著,特别是对随机移除行（列）和椒盐噪声有较强的鲁棒性。