水热法合成K0.5Bi0.5TiO3纳米陶瓷粉体

K_0.5Bi_0.5TiO₃(KBT)nanocrystalline particles were hydrothermally synthesized from Bi(NO₃)₃·5H₂O, TiO₂ and KOH. The crystal phase, chemical composition and microstructure were characterized by XRD, XRF, Raman scattering spectroscopy and TEM. The results indicated that the products were pure perovskite structured K_0.5Bi_0.5TiO₃ with chemical stoichiometry and perovskite structure. The TEM observation revealed that the particles possessed a feature of cubic shape and a nano-scale of about 40 nm. The KBT ceramics sintered at 1 040 ℃ from hydrothermal powders show higher density and better electric properties than that prepared by a solid-state reaction method.     

对固体圆二色光谱测试方法的再认识——兼谈“浓度效应”

对近期发展的固体圆二色(CD)光谱测试方法进行了概述、评价和比较, 着重探讨了“浓度效应”的存在使固体CD光谱失真的原因. 通过对本课题组和其他作者已报道的四种化合物的固体CD谱再测试的反思, 强调了依手性化合物的手性光谱学性质不同, 根据浓度梯度实验选择其合适测试浓度的必要性. 对固有手性的阻转异构化合物(S)-1,1'-联二萘酚(S-BINOL)进行了成膜法固体CD谱浓度梯度测试, 发现所得固体薄膜CD谱中也存在着“浓度效应”     

Crystalline Morphology and Polymorphic Phase Transitions in Electrospun Nylon 6 Nanofibers

Uniform nylon 6 nanofibers with diameters around 200 nm were prepared by electrospinning. Polymorphic phase transitions and crystal orientation of nylon 6 in unconfined (i.e., as-electrospun) and a high T(g) (340 degrees C) polyimide confined nanofibers were studied. Similar to melt-spun nylon 6 fibers, electrospun nylon 6 nanofibers also exhibited predominant, meta-stable gamma crystalline form, and the gamma-crystal (chain) axes preferentially oriented parallel to the fiber axis. Upon annealing above 150 degrees C, gamma-form crystals gradually melted and recrystallized into the thermodynamically stable alpha-form crystals, which ultimately melted at 220 degrees C. Release of surface tension accompanied this melt-recrystallization process, as revealed by differential scanning calorimetry. For confined nanofibers, both the melt-recrystallization and surface tension release processes were substantially depressed; gamma-form crystals did not melt and recrystallize into alpha-form crystals until 210 degrees C, only 10 degrees C below the T(m) at 220 degrees C. After complete melting of nano-confined crystals at 240 degrees C and recrystallization at 100 degrees C, only alpha-form crystals oriented perpendicular to the nanofiber axis were obtained. In the polyimide-confined nanofibers, the Brill transition (from the monoclinic alpha-form to a high temperature monoclinic form) was observed at 180-190 degrees C, which was at least 20 degrees C higher than that in unconfined nylon 6 at approximately 160 degrees C. This, again, was attributed to the confinement effect.     

A new method for inversion of hydroxyl group of carbocyclic nucleosides

The hydroxyl group of carbocyclic nucleosides was inversed when the compounds were treated with Me_3SiCl,KCN and a catalytic amount of NaI in DMF/CH_3CN.     

基于金属介导和离子液体的新型绿原酸印迹整体柱的制备及评价

选用1-乙烯基-3-乙基咪唑四氟硼酸盐([VElm]BF4,一种离子液体)作为功能单体,以Co2+为介导离子,结合1-丁基-3-甲基咪唑四氟硼酸盐([BMIM]BF4)/二甲基亚砜(DMSO)二元致孔体系制备了绿原酸印迹整体柱。经过对制备参数的考察,确定最佳比例为绿原酸:Co2+:[VElm]BF4:EDMA(乙二醇二甲基丙烯酸酯)(摩尔比)=1:1:5:20,[BMIM]BF4:DMSO=3:1(V/V),最大印迹因子达2.10。通过优化色谱条件,最终在乙腈:20 mmol/L乙酸钠缓冲液(pH 4.2)=70:30(V/V)时实现了绿原酸及其类似物的完全分离。由此可见,以离子液体为功能单体及致孔剂,在金属介导策略下制备的分子印迹聚合物可实现绿原酸的特异性识别及分离。     

甲基锍盐的合成

在四氟硼酸银存在下，分别以硫醚、硫醇、硫酚或过硫醚为原料与碘甲烷反应制备了相应的甲基锍盐。用１ＨＮＭＲ和１３ＣＮＭＲ表征产物的结构并提出了反应的机理。     

气相[（SiO2）nX]^—团簇产生机理

利用ＸｅＣｌ准分子激光烧蚀多种硅氧多孔结构材料，在负离子通道测得丰富的「（ＳｉＯ２）ｎＸ」＾－负离子团簇，并讨论了多孔网结构和表面活性基团的分布对激光能量的吸收，传输及团簇产生的重要作用。     

Extraction of thorium,uranium and cerium from fresh water using manganese dioxide coprecipitation

A manganese dioxide coprecipitation procedure is utilized to replace a time-consuming evaporation step for the extraction of thorium, uranium and cerium from freshwater samples. The average recovery for 20-liter samples is greater than 95% for²³⁴Th and¹⁴⁴Ce. The data indicate that the manganese dioxide coprecipitation process does not affect the recovery of thorium and uranium during our routine analytical procedure.     

从电子工业“脊梁”到全面开花的镓元素

镓是第一个根据化学元素周期律预言并在自然界中证实的元素，是室温下电导率和热导率均为最大的液态物质，镓在电子工业中得到了广泛应用，被誉为电子工业“脊梁”。近十几年来，镓的更多应用潜力被发掘出来，在电子工业、散热、增材制造、柔性机器、生物医学等领域均有重要的应用前景。     

Molecular and nanoscale materials and devices in electronics

Over the past several years, there have been many significant advances toward the realization of electronic computers integrated on the molecular scale and a much greater understanding of the types of materials that will be useful in molecular devices and their properties. It was demonstrated that individual molecules could serve as incomprehensibly tiny switch and wire one million times smaller than those on conventional silicon microchip. This has resulted very recently in the assembly and demonstration of tiny computer logic circuits built from such molecular scale devices. The purpose of this review is to provide a general introduction to molecular and nanoscale materials and devices in electronics.