Electron-Optical System of a High-Power Gyrotron with Nonadiabatic Electron Gun

We describe a nonadiabatic electron gun operated in the mode of a currentconfined by spatial charge and intended for producing helical electron beams for high-power gyroresonantdevices.Results of numerical simulation of electron trajectories and electron-beam parameters arepresented. It is shown that for a high operating current, the pitch factor and the electronvelocity spread can be significantly better than in the conventional adiabatic systems. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 48,No. 6, pp. 517–522, June 2005     

Magnetic and martensitic transitions in Ni-Fe-Ga alloy

The ferromagnetic shape memory alloy with nominal composition Ni₅₄Fe₁₉Ga₂₇ is investigated by Ac susceptibility and resistivity measurements. The alloy shows long-range ferromagnetic order below 290 K. The anomaly due to the martensitic transition is observed in the susceptibility and resistivity data in the temperature range around 220 K, which is associated with clear thermal hysteresis. Minor hysteresis loop technique was used to investigate the phase coexistence across the martensitic transition, and our analysis indicate that both martensite and austenite phases mutually coexist in the region of hysteresis.     

Prediction of critical temperature of n-alkanes and n-alkenes from surface tension vs. temperature data

 The surface tension versus temperature data of homologous series of n-alkanes and n-alkenes is analyzed. Critical temperatures are shown to be predicted from these data, with a very high precision, after some corrections are made. The corrections are shown to arise from the effect of the critical pressure on the extrapolated data to surface tension approaching zero. Received: 29 October 1996 Accepted: 13 December 1996     

Dynamics of acoustoelectromagnetic solitons as a manifestation of higher nonlinearity

The acoustoelectromagnetic interaction is examined in a regime where three mechanisms must be taken into account simultaneously: photoelasticity, quadratic photoelasticity, and elastic nonlinearity. It is shown that beyond the critical conditions, acoustic solitary waves are formed at harmonic and subharmonic frequencies in a crystal. Including damping and nonideal reflection at the boundaries does not lead to the establishment of any sort of stationary state: a soliton spatial-temporal dynamic develops. Fiz. Tverd. Tela (St. Petersburg) 39, 1101–1104 (June 1997)     

Existence regions of regimes with anomalously high rates of plasma generation in grid plasma switch elements

Results are presented from a systematic investigation of the conditions under which anomalously high rates of plasma generation are observed in the anode region of a low-voltage Knudsen arc in grid plasma switch elements. The phenomenon develops over a wide range of currents and switched voltages under conditions for which the plasma density in the cathode-grid region is noticeably higher than the density in the anode region. and its onset is characterized by a pronounced pressure threshold of ∼2×10⁻² Torr. The results are analyzed from the standpoint of the possible mechanisms for anomalous plasma generation — collisional nonresonance diffusion of electrons in velocity space, leading to enrichment of the distribution function in fast particles, and the collapse of Langmuir waves in the gap at the high energies of the beam produced when the wires of the grid are bridged by the quenching pulse and and the current is blocked. Zh. Tekh. Fiz. 67, 15–21 (June 1997)     

Optical corrosion meter

In a previous study, a mathematical model relating surface and bulk behaviours of metals in aqueous solution has been developed. The model was established based on principles of holographic interferometry for measuring microsurface dissolution, i.e. mass loss, and on those of electrochemistry for measuring the bulk electronic current, i.e. corrosion current. In the present work, an optical corrosion meter was built based on the above model. The corrosion meter consists of an electrochemical cell in which the sample is immersed in aqueous solution. Furthermore, the corrosion meter has a holographic camera with a thermoplastic film for in situ processing of holograms in order to obtain real-time holographic interferoms of the sample in the electrochemical cell. Results of the present work indicate that optical holography is a very useful technique for measuring the corrosion current density of different alloys in aqueous solutions. As a result, the corrosion current density of aluminium, stainless steel, and low-carbon steel in 1 M KCl, 1 M NaCl, and 1 M NaOH solutions were obtained. A comparison between the corrosion data of samples showed that the corrosion current density of the stainless steel in 1 M NaCl is nearly three-folds higher than that of the aluminium in 1 M KCl and the low-carbon steel in 1 M NaOH.     

An apparent momentum balance anomaly in the plasma focus

The validity of the snowplow model of plasma sheath propagation in a plasma focus (PF) and the localization of the magnetic field in the low density region behind the dense plasma sheath are two well-established experimental facts. It is shown that, when taken together, these two imply a deficiency in the momentum balance. The hypothesis that the current-carrying plasma layer is rotating while the dense plasma layer is not rotating is shown not only to resolve this momentum balance anomaly (MBA), but also to explain many observed phenomena in a unified manner     

An electro-optic holographic technique for the measurement of the components of the strain tensor on three-dimensional object surfaces

An electro-optic holographic technique (also called electronic speckle pattern interferometry or TV holography) for the measurement of displacements and strains on three-dimensional object surfaces is presented. The three components of the displacement vector, in a fixed coordinate system, are separated using four independent illumination beams. The interferometric phase for each illumination beam is extracted using the phase stepping technique. Displacements in the fixed coordinate system are projected on to the object surface using the tensor transformation law. Equations for the computation of surface strains using the projected displacements and the surface geometry are developed. The technique is applied for the measurement of strains on the surface of a cylindrical vessel subjected to internal pressure.     

Optical bistability in an all-optical fiber nonlinear fabry-perot resonator with linear absorption

An all-optical fiber nonlinear Fabry-Perot resonator is proposed. The steady-state model for describing this resonator is developed. The transmission and refection bistabilities are shown numerically. Our results show that the bistability in this system is similar to that in a normal nonlinear Fabry-Perot etalon, except that the characteristics of the bistability can be changed not only by the cavity length but also by the phase shifts of the fiber loop mirrors.