Computation of confined coflow jets with three turbulence models

A numerical study of confined jets in a cylindrical duct is carried out to examine the performance of two recently proposed turbulence models: an RNG-based K-? model and a realizable Reynolds stress algebraic equation model. The former is of the same form as the standard K-? model but has different model coefficients. The latter uses an explicit quadratic stress-strain relationship to model the turbulent stresses and is capable of ensuring the positivity of each turbulent normal stress. The flow considered involves recirculation with unfixed separation and reatachment points and severe adverse pressure gradients, thereby providing a valuable test of the predictive capability of the models for complex flows. Calculations are performed with a finite volume procedure. Numerical credibility of the solutions is ensured by using second-order-accurate differencing schemes and sufficiently fine grids. Calculations with the standard K-? model are also made for comparison. Detailed comparisons with experiments show that the realizable Reynolds stress algebraic equation model consistently works better than does the standard K-? model in capturing the essential flow features, while the RNG-based K-? model does not seem to give improvements over the standard K-? model under the flow conditions considered.     

On the Finiteness of the Discrete Spectrum of a Four-Particle Lattice Schrödinger Operator

A Hamiltonian describing four bosons that move on a lattice and interact by means of pair zero-range attractive potentials is considered. A stronger version of the Hunziker–Van Vinter–Zhislin theorem on the essential spectrum is established. It is proved that the set of eigenvalues lying to the left of the essential spectrum is finite for any interaction energy of two bosons and is empty if this energy is sufficiently small.     

Crystal structures of two ancylite modifications

The crystal structures of two ancylite specimens from Khibiny massif (the Kola Peninsula, Russia)—ancylite-(Ce) from alkali hydrothermalites (Sr_1.01Ca_0.02Ba_0.01)_Σ1.04(Ce_0.52La_0.28Nd_0.11Pr_0.04 Sm_0.01)_Σ0.96(CO₃)₂(OH_0.83F_0.13)_Σ0.96 · 0.9H₂O and ancylite-(Ce) from carbonatites—have (Sr_0.80Ca_0.05Ba_0.01)_Σ0.86(Ce_0.62La_0.40Nd_0.09Pr_0.03) _Σ1.14(CO₃)₂(OH_0.99F_0.15)_Σ1.14 · 1.0H₂O been refined by the Rietveld method. A focusing STOE-STADIP diffractometer with a bent Ge(111) primary monochromator was used (λ MoK _{α 1} radiation, 2.16° < 2θ < 54.98°; reflection number 237–437). All the computations for ancylite from alkali hydrothermalites were performed within the sp. gr. Pmc2₁, a = 5.0634(1) Å, b = 8.5898(1) Å, c = 7.2781(1) Å, V = 316.55(1) ų, R _wp = 1.90; the computations for ancylite from carbonatites were performed within the sp. gr. Pmcn, a = 5.0577(1) Å, b = 8.5665(2) Å, c = 7.3151(2) Å, V = 316.94(1) ų, R _wp = 2.38 in the anisotropic approximation of thermal vibrations of cations and oxygen atoms.     

Monte Carlo determinations of the beta dose rate to tooth enamel

The results of Monte Carlo simulations of the beta dose rate to enamel are presented. The dose rates are the most comprehensive to date, incorporating the beta spectrum from 21 different radionuclides, all internal conversion and Auger electrons, the majority of the bremsstrahlung radiation, effects due to radon loss in the uranium series, and variations in the moisture content of the sediment. Applications to a new dating technique in archaeology using electron spin resonance and beta-gradient isochrons are discussed.     

Magnetic resonance imaging of rigid polymers at elevated temperatures with SPRITE

Magnetic resonance imaging has rarely been applied to rigid polymeric materials, due primarily to the strong dipolar coupling and short signal lifetimes inherent in these materials. SPRITE (single point ramped imaging withT ₁ enhancement) (B. J. Balcom, R. P. MacGregor, S. D. Beyea, D. P. Green, R. L. Armstrong, T. W. Bremner: J. Magn. Reson. A123, 131–134, 1996) is particularly well suited to imaging solid materials. With SPRITE, the only requirement is thatT ₂^* be long enough so that the signal can be phase-encoded. The minimum phase encoding time is limited by the maximum gradient strength available and by the instrument deadtime. At present this is usually tens of microseconds and will only improve with refinements in technology. We have used the SPRITE sequence in conjunction with raising the sample temperature to obtain images of rigid polymers that have largely frustrated conventional imaging methods. This approach provides a straightforward and reliable method for imaging a class of samples that, up until now, have been very difficult to image.     

Laser writing techniques for photomask fabrication using a femtosecond laser

Photomasks are the backbone of microfabrication industries. Currently they are fabricated by a lithographic process, which is very expensive and time consuming since it is a multi-step process. These issues can be addressed by fabricating photomasks by direct femtosecond laser writing, which is a single-step process and comparatively cheaper and faster than lithography. In this paper we discuss our investigations on the effect of two types of laser writing techniques, namely front- and rear-side laser writing, with regard to the feature size and the edge quality of a feature. It is proved conclusively that for the patterning of masks, front-side laser writing is a better technique than rear-side laser writing with regard to smaller feature size and better edge quality. Moreover the energy required for front-side laser writing is considerably lower than that for rear-side laser writing. Received: 22 May 2001 / Accepted: 14 September 2001 / Published online: 17 October 2001     

Dynamic scanning force microscopy study of self-assembled DNA-protein nanostructures

Self-assembled oligomeric nanostructures consisting of bisbiotinylated DNA fragments connected by the protein streptavidin (STV) are studied by dynamic scanning force microscopy (SFM) operating in air. A comparison of the images taken in repulsive and attractive regimes is systematically made on DNA and STV structures. Stable and reproducible SFM images are obtained in the attractive regime by using a special feedback circuit, called Q-control. On the other hand, when SFM is operating in the repulsive regime, deformation of the structures that reduce the resolution and the image quality are clearly observable. The heights of both DNA and STV have been measured as a function of the tip/molecule interaction forces. This study offers the possibility to suggest a different mechanical behavior of DNA with respect to STV. Received: 24 July 2001 / Accepted: 3 December 2001 / Published online: 4 March 2002