SPE and determination by FAAS of heavy metals using a new synthesized polymer resin in various water and dried vegetables samples

Firstly, poly[phenyl thiadiazole methacrylamide-co-divinylbenzene-co-2-acrylamido-2-methylpropane sulfonic acid] (PTMAAm-co-DVB-co-AMPS), a new polymer resin was synthesized. This polymer resin was characterized by elemental analyzer, X-ray diffractometer, scanning electron microscope (SEM) and IR spectrometer. The glass column packed with the synthesized polymer resin was used for solid phase extraction (SPE). At the same time, the analytes were separated and preconcentrated from various water, dried vegetables samples and standard reference material (CRM) with SPE and determined by flame atomic absorption spectrometer (FAAS). The experimental conditions of this method such as pH, flow rates of sample, flow rates of eluent, type / concentration / volume of eluent, sample volume and matrix ions were examined. The limits of detection (µg L^?1) were calculated (3s) 0.9 for Mn(II), 1.4 for Cd(II), Co(II) and Zn(II), 1.5 for Cr(III), 2.2. for Cu(II), 1.9 for Pb(II),1.5 for Ni(II) and 1.9 for Fe(III) (n = 21). The low relative standard deviation, ≤ 2% (n = 11) and preconcentration factor as 75 for analytes were obtained.     

On-line preconcentration and determination of Au(III) in various environmental/industrial samples by flame atomic absorption spectrometry

A rapid and simple on-line method is described for the determination of Au(III) in various samples. The method is based on the sorption of gold(III) on Lewatit MonoPlus TP207 chelating resin including the iminodiacetate group, which is used as sorbent material and packed in a minicolumn. The chemical variables such as the pH of the sample solution, eluent type, interfering ions and concentrations of reagents, and instrumental variables such as sample loading volume, reagents flow rates, and tubing length, which affect the efficiency of the method were studied and optimised. Au(III) was sorbed on the chelating resin, from which it could be eluted with 3 mol L^?1 HCl, and then introduced directly to the nebuliser-burner system of FAAS. The limit of detection of the method was 0.2 µg L^?1 while the relative standard deviation was <4.0% for 20 µg L^?1 Au(III) concentration. The preconcentration factor was found to be 106 while the optimised sample volume was 15.3 mL. The accuracy of the method was verified by analysing the certified reference material. The developed method was applied successfully for the determination of gold in different samples with satisfactory results.     

Asymmetric transfer hydrogenation of imines catalyzed by a Noyori-type Ru(II) complex—a parametric study

We present, to the best of our knowledge, the first parametric study of the asymmetric transfer hydrogenation of imines catalyzed by a Noyori-type catalytic complex based on ruthenium. A model imine for this study was 1-methyl-3,4-dihydroisoquinoline, and a well-known complex RuCl(η⁶-p-cymene)((1S,2S)-N-p-toluenesulfonyl-1,2-diphenylethylenediamine) was chosen as the model catalyst. The reactions were performed in the presence of a formic acid–triethylamine mixture as the source of hydrogen.The parameters examined include general parameters, for example, concentration, temperature, and substrate-to-catalyst molar ratio, as well as parameters specific to this particular reaction, such as the amount of the hydrogenation mixture used, the ratio of its components, or the inhibitive effect of carbon dioxide. During this study, several unexpected parameters worth further investigation have emerged.     

Optimization Condition for Thin-Layer Identification of Bronzes after Anodic Sampling

JPC – Journal of Planar Chromatography – Modern TLC - Qualitative identification of Cu, Sn, Pb, Ni, and Fe in Cu-alloys is presented. The method involves anodic sampling of alloys,...     

Spatiotemporal Studies of the One-Dimensional Coordination Polymer [Fe(ebtz)2(C2H5CN)2](BF4)2: Tug of War between the Nitrile Reorientation Versus Crystal Lattice as a Tool for Tuning the Spin Crossover Properties**

Reaction of 1,2-di(tetrazol-2-yl)ethane (ebtz) with Fe(BF₄)₂⋅6 H₂O in different nitriles yields one-dimensional coordination polymers [Fe(ebtz)₂(RCN)₂](BF₄)₂⋅nRCN (n=2 for R=CH₃ ( 1 ) and n=0 for R=C₂H₅ ( 2 ) C₃H₇ ( 3 ), C₃H₅ ( 4 ), CH₂Cl ( 5 )) exhibiting spin crossover (SCO). SCO in 1 and 3 – 5 is complete and occurs above 160 K. In 2 , it is shifted to lower temperatures and is accompanied by wide hysteresis (T_1/2^↓=78 K, T_1/2^↑=123 K) and proceeds extremely slowly. Isothermal (80 K) time-resolved single-crystal X-ray diffraction studies revealed a complex nature for the HS→LS transition in 2 . An initial, slow stage is associated with shrinkage of polymeric chains and with reduction of volume at 77 % (in relation to the difference between cell volumes V_HS−V_LS) whereas only 16 % of iron(II) ions change spin state. In the second stage, an abrupt SCO occurs, associated with breathing of the crystal lattice along the direction of the Fe–nitrile bonds, while the nitriles reorient. HS→LS switching triggered by light (808 nm) reveals the coupling of spin state and nitrile orientation. The importance of this coupling was confirmed by studies of [Fe(ebtz)₂(C₂H₅CN/C₃H₇CN)₂](BF₄)₂ mixed crystals ( 2 a , 2 b ), showing a shift of T_1/2 to higher values and narrowing of the hysteresis loop concomitant with an increase of the fraction of butyronitrile. This increase reduces the capability of nitrile molecules to reorient. Density functional theory (DFT) studies of models of 1 – 5 suggest a particular possibility of 2 to adopt a low (140–145°) value of its Fe-N-C(propionitrile) angle.     

Silica-Supported MnII Sites as Efficient Catalysts for Carbonyl Hydroboration,Hydrosilylation, and Transesterification

Manganese, the third most abundant transition-metal element after iron and titanium, has recently been demonstrated to be an effective homogeneous catalyst in numerous reactions. Herein, the preparation of silica-supported Mn^II sites is reported using Surface Organometallic Chemistry (SOMC), combined with tailored thermolytic molecular precursors approach based on Mn₂[OSi(OtBu)₃]₄ and Mn{N(SiMe₃)₂}₂⋅THF. These supported Mn^II sites, free of organic ligands, efficiently catalyze numerous reactions: hydroboration and hydrosilylation of ketones and aldehydes as well as the transesterification of industrially relevant substrates.     

A Facile Method for the Separation of Methionine Sulfoxide Diastereomers,Structural Assignment,and DFT Analysis

Methionine (Met) oxidation is an important biological redox node, with hundreds if not thousands of protein targets. The process yields methionine oxide (MetO). It renders the sulfur chiral, producing two distinct, diastereomerically related products. Despite the biological significance of Met oxidation, a reliable protocol to separate the resultant MetO diastereomers is currently lacking. This hampers our ability to make peptides and proteins that contain stereochemically defined MetO to then study their structural and functional properties. We have developed a facile method that uses supercritical CO₂ chromatography and allows obtaining both diastereomers in purities exceeding 99 %. ¹H NMR spectra were correlated with X-ray structural information. The stereochemical interconversion barrier at sulfur was calculated as 45.2 kcal mol⁻¹, highlighting the remarkable stereochemical stability of MetO sulfur chirality. Our protocol should open the road to synthesis and study of a wide variety of stereochemically defined MetO-containing proteins and peptides.