Proposition of Single Molecular Orientation Determination Using polarization Controlled Beam by Liquid Crystal Spatial Light Modulators

We have proposed a method to control the three-dimensional electric field in the focus of an optical microscope using two non-twisted liquid crystal spatial light modulators, and to detect the molecular orientation of a single molecule. The three-dimensional electric field is generated by focusing the beam with two dimensional spatial distribution of polarization. The possibility of detection of three-dimensional single molecular orientation was shown by numerical calculations. © 2005 The Optical Society of Japan     

Formation and characterization of high-density Fe cluster-assembled films with soft magnetic behaviors

High-density, magnetically soft Fe cluster-assembled films were obtained at room temperature by an energetic cluster deposition. Size-monodispersed Fe clusters with the mean cluster size d = 9, 13 and 16 nm were produced using a plasma-gas-condensation technique. Ionized clusters in cluster beam were accelerated electrically and deposited onto the substrate together with neutral clusters from the same cluster source. The morphology, microstructure and magnetic properties of the cluster-assembled films have been studied by an atomic force microscopy, scanning electron microscopy, transmission electron microscopy, and superconducting quantum interference device magnetometer. By increasing the impact energy of the ionized clusters up to 0.6 eV/atom, the Fe cluster-assembled film has a packing fraction of 0.86±0.03, and reveals a soft magnetic behavior. In addition, it is found that oxidization of the cluster-assembled films is remarkably suppressed with the increase in the density of the films.     

Muon spin relaxation studies of magnetic-field-induced effects in high-Tc superconductors

Muon spin relaxation measurements in high transverse magnetic fields [FORMULA: SEE TEXT] revealed strong field-induced quasistatic magnetism in the underdoped and Eu-doped (La,Sr)2CuO4 and La1.875Ba0.125CuO4, existing well above Tc and TN. The susceptibility counterpart of Cu spin polarization, derived from the muon spin relaxation rate, exhibits a divergent behavior towards T approximately 25 K. No field-induced magnetism was detected in overdoped La1.81Sr0.19CuO4, optimally doped Bi2212, and Zn-doped YBa2Cu3O7.     

Possible one-dimensional 3He quantum fluid formed in nanopores

Heat capacity measurements have been made down to 5 mK for 3He fluid films adsorbed in one-dimensional (1D) nanometer-scale pores, 28 A in diameter, preplated with 4He of 1.47 atomic layers. At low 3He density, the heat capacity shows a density-dependent, Schottky-like peak near 150 mK asymptoting to the value corresponding to a 2D Boltzmann gas at high temperatures. The peak behavior is attributed to the crossover from a 2D gas to a 1D state at low temperatures. The degenerate state of the 1D 3He fluid is indicated by a predominantly linear temperature dependence below about 30 mK.     

Study on the effect of sound duration on the annoyance of helicopter noise by applying a technique of time compression and expansion of sound signals

The number of helicopter operations has rapidly increased during the last 20 years in Japan. Helicopter noise sounds different from other aircraft; the waveform of the sound pressure is impulsive and the signal duration is relatively long. The Environmental Agency of Japan implemented new guidelines for evaluating noise exposure around small airports, including heliports, in 1990. This study was executed in connection with the development of provisional guidelines. Psychoacoustic experiments were carried out to identify an evaluation index for helicopter noise. In order to examine the effect of duration independently, we not only used original sound recordings, but also synthesized sound signals. The durations of these sound signals were time compressed or expanded without degrading the quality of the original sound recording. The test results show that the effect of duration is significant, and that the A-weighted sound exposure level is a better index than the maximum A-weighted sound pressure level for the evaluation of helicopter noise.     

Cluster size dependence of SiO2 thin film formation by O2 gas cluster ion beams

Cluster size effects of SiO₂ thin film formation with size-selected O₂ gas cluster ion beams (GCIBs) irradiation on Si surface were studied. The cluster size varied between 500 and 20,000 molecules/cluster. With acceleration voltage of 5 kV, the SiO₂ thickness was close to the native oxide thickness by irradiation of (O₂)_20,000 (0.25 eV/molecule), or (O₂)_10,000 (0.5 eV/molecule). However, it increased suddenly above 1 eV/molecule (5000 molecules/cluster), and increased monotonically up to 10 eV/molecule (500 molecules/cluster). The SiO₂ thickness with 1 and 10 eV/molecule O₂-GCIB were 2.1 and 5.0 nm, respectively. When the acceleration voltage was 30 kV, the SiO₂ thickness has a peak around 10 eV/molecule (3000 molecules/cluster), and it decreased gradually with increasing the energy/molecule. At high energy/molecule, physical sputtering effect became more dominant process than oxide formation. These results suggest that SiO₂ thin film formation can be controlled by energy per molecule.     

Mechanically strengthened new Hagi porcelain developed by controlling the chemical environment of iron

In order to enhance the mechanical strength of Hagi Porcelain (Hagiyaki), one of the oldest and famous potteries in Japan, new preparation condition was examined. Tempered Hagi porcelain, denominated as ‘Hagi Porcelain B’, was prepared with the Porcelain clay originating from Daido district, Yamaguchi Prefecture, Japan. Structural change of ‘Hagi Porcelain B’ was investigated by means of ⁵⁷Fe-Mössbauer spectroscopy, X-ray diffractometry (XRD) and three-point bending test. Mechanical strength of the ‘original Hagi Porcelain B’ was estimated to be 43.1 MPa by means of the three-point bending test, while much larger value of 104.5 MPa could be achieved when tempered by a chemical modification. Mössbauer spectrum of the ‘original Hagi porcelain B’ was composed of a paramagnetic doublet and a magnetic sextet due to Fe(III) of γ-Fe₂O₃(maghemite), while only one paramagnetic doublet due to to octahedral Fe(II)O₆ was observed for the ‘tempered Hagi Porcelain B’ with isomer shift and quadrupole splitting values of 1.13 and 2.15 mm s^?1, respectively. It is considered that the absence of magnetic phase causes an increase of the mechanical strength because the maghemite phase has a defect spinel structure. These results indicate that mechanical strength of the ‘Hagi porcelain B’ could be enhanced by controlling the sintering condition.     

Thin films prepared by simultaneous deposition of copper and free-base phthalocyanine

Composite films of metals and dielectrics attracted considerable attention in the past for their novel optical and mechanical properties which can be tailored precisely by changing their structure and composition. In this work we present a probe into a related but hitherto unexplored field of composites where metal is combined with molecular semiconductor. As model materials we chose free-base phthalocyanine and copper. Films were prepared by simultaneous deposition of copper and free-base phthalocyanine in the dual ICB system. An answer to two basic questions was sought after: 1) does the copper combine with freebase phthalocyanine to form a copper phthalocyanine complex, 2) what is the structure of the films if there is non-stoichiometric surplus of copper in the films? We report results of structural study by a transmission electron microscope. Optical behaviour of the composite was characterized by optical reflectance and transmittance measurement in UV/VIS/NIR range and complemented by FT IR spectra.     

SUSY flavor structure of generic 5D supergravity models

We perform a comprehensive and systematic analysis of the SUSY flavor structure of generic 5D supergravity models on S ¹/Z ₂ with multiple Z ₂-odd vector multiplets that generate multiple moduli. The SUSY flavor problem can be avoided due to contact terms in the 4D effective K?hler potential peculiar to the multi-moduli case. A?detailed phenomenological analysis is provided based on an illustrative model.     

Precise measurement of positronium hyperfine splitting using the Zeeman effect

Positronium is an ideal system for the research of the quantum electrodynamics (QED) in bound state. The hyperfine splitting (HFS) of positronium, Δ_HFS, gives a good test of the bound state calculations and probes new physics beyond the Standard Model. A new method of QED calculations has revealed the discrepancy by 15 ppm (3.9σ) of Δ_HFS between the QED prediction and the experimental average. There would be possibility of new physics or common systematic uncertainties in the previous all experiments. We describe a new experiment to reduce possible systematic uncertainties and will provide an independent check of the discrepancy. We are now taking data and the current result of Δ_HFS?=?203.395 1 ±0.002 4 (stat., 12 ppm) ±0.001 9 (sys., 9.5 ppm) GHz has been obtained so far. A measurement with a precision of O(ppm) is expected within a year.