Fluorescent Triphenyl Substituted Maleimide Derivatives: Synthesis,Spectroscopy and Quantum Chemical Calculations

In this paper we describe a semi-empirical quantum method for predicting the wavelength of maximum fluorescence excitation and emission for several known and new maleimide derivatives. All new maleimides, containing a N-Benzyl attachment, were successfully synthesised via a tandem Suzuki reaction with aryl boronic acids containing either an electron donating, electron withdrawing functional groups. Absorption and emission spectra calculated using the semi-empirical AM1 method with excited state ZINDO calculations proved more reliable than either Hartree-Fock Configuration interaction or time dependent density functional methods. Calculated absorption and emission wavelengths were compared with 26 experimental spectra from known or newly synthesised maleimides and found to have provide reasonable predictions, with an average deviation of less the 6% for absorption maxima and less than 4% for emission peaks. The described method provides a strong benchmark for the accuracy that can be expected from theoretical predictions of fluorescence spectra.     

Nickel(II) complexes bearing pyrazolylimine ligand: synthesis,structure, and catalytic properties for vinyl‐type polymerization of norbornene

Two nickel(II) complexes of {2‐[C₃HN₂(R₁)₂‐3,5]}[C(R₂)?N(C₆H₃ⁱPr₂‐2,6)]NiBr₂ (complex 1 : R₁ = CH₃, R₂ = 2,4,6‐trimethylphenyl; complex 2 : R₁ = R₂ = Ph) were synthesized and characterized. The solid‐state structure of complex 1 has been confirmed by X‐ray single‐crystal analysis. Activated by methylaluminoxane (MAO), complexes 1 and 2 are capable of catalyzing the polymerization of norbornene with moderate activities [up to 10.56 × 10⁵ gPNBE (mol Ni h)^?1] with high molecular weights (M_w?13.56 × 10⁵ g mol^?1) and molecular weight distributions were around 2. The influences of polymerization parameters such as reaction temperature and Al–Ni molar ratio on catalytic activity and molecular weight of the polynorbornene were investigated in detail. The obtained polynorbornenes were characterized by means of ¹H‐NMR and FTIR techniques. The analytical results of polymer structures indicated that the norbornene polymerization is vinyl‐type polymerization rather than ROMP. Copyright © 2009 John Wiley & Sons, Ltd.     

不同温度热处理后砂岩三点弯曲的断裂特性

通过三点弯曲试验研究了不同温度影响下小尺度砂岩试件的断裂特性,证实温度的影响是明显的.125℃是个临界温度点,此时不仅砂岩的平均断裂韧性达到最大值,而且这时砂岩的裂纹扩展模式也发生了根本性的变化,即低温(低于125℃)热处理后砂岩的断裂以沿颗粒断裂机制为主;而高温(大于125℃)热处理后的砂岩的断裂以破断颗粒和沿颗粒的混合断裂机制为主.在100℃-150℃的温度范围内,砂岩的力学特性变得不稳定,这可能是由于粘土物质内部部分吸附水及层间水的蒸发使得粘土物质孔隙结构发生了变化及力学行为变得不稳定所造成的.从125℃到600℃,砂岩的断裂韧性整体有下降趋势,有约50%的降幅,这不仅与温度影响了粘土物质与矿物的胶结情况有关,也与高温处理后砂岩表面出现的热开裂有关,还与因矿物颗粒及粘土物质的热学性质差异导致冷却后存在的残余应力相关.     

介孔钯-硼合金纳米颗粒的制备和甲醇氧化电催化性能北大核心CSCD

合金化可以调节贵金属纳米材料的物理化学性质,从而显著提升它们的电催化性能。尽管合金化在过去的20多年里已取得诸多成果,但是如何充分发挥纳米合金的组分优势仍需深入的探究。本研究通过一步溶液相合成法实现了类金属硼(B)合金化的钯基介孔纳米催化剂材料的合成,同时探究了B原子的组分优势和介孔形貌的结构优势在碱性介质中电化学甲醇氧化反应(MOR)的协同作用。最优PdCuB介孔纳米催化剂表现出优异的电化学MOR活性和稳定性。机理研究表明,优异的催化活性源于B原子在Pd基介孔纳米催化剂中的积极协同作用;该协同作用通过电子效应(改变Pd的表面电子结构从而减弱CO基中间体的吸附)和双功能效应(促进OH_(2)的吸附从而氧化CO基中间体)在动力学上加速了有毒CO基中间体的去除(提高甲醇氧化的决速步骤)。同时,B原子的间隙插入和介孔结构抑制了物理奥斯特瓦尔德(Ostwald)熟化过程,显著增加了催化剂的稳定性。     

Fast Fabrication and Judgement of Tip-Enhanced Raman Spectroscopy-Active Tips

The quality of the scanning tip is crucial for tip-enhanced Raman spectroscopy (TERS) experiments towards large signal enhancement and high spatial resolution. In this work, we report a controllable fabrication method to prepare TERS-active tips by modifying the tip apex at the atomic scale, and propose two important criteria to in-situ judge the tip's TERS activity for tip-enhanced Raman measurements. One criterion is based on the downshift of the first image potential state to monitor the coupling between the far-field incident laser and near-field plasmon; the other is based on the appearance of the low-wavenumber Raman peaks associated with an atomistic protrusion at the tip apex to judge the coupling efficiency of emissions from the near field to the far field. This work provides an effective method to quickly fabricate and judge TERS-active tips before real TERS experiments on target molecules and other materials, which is believed to be instrumental for the development of TERS and other tip-enhanced spectroscopic techniques.     

基于ZIF-8/PAN复合薄膜的柔性丙酮气体传感器

ZIF-8是一种Zn基金属有机骨架材料, 可以吸附丙酮气体从而作为电容式丙酮传感器的气敏材料, 然而ZIF-8的传统使用形式为粉末态, 这导致其不能成为具备柔性的整体, 从而限制了传感器的柔性. 结合包埋种子和二次生长法将ZIF-8与纳米纤维结合成纤维型柔性材料, 并将其作为气敏层制备了柔性电容式丙酮气体传感器. 该传感器在9种常见挥发性有机化合物中表现出良好的选择性, 对250~2000 cm³/m³的丙酮气体具有灵敏的响应、良好的循环响应及长期稳定性. 值得注意的是该柔性传感器不仅在室温下进行传感, 而且在弯折180°的状态下对丙酮气体的响应值与不弯折(0°)状态下几乎一致, 在200次以内的180°弯折-恢复后同样表现出了传感性能的稳定, 表明了其在柔性传感器方面的潜力.     

A rapid heating and high magnetic field thermal analysis technique

Journal of Thermal Analysis and Calorimetry - A new thermal analysis technique is described that allows measurements to be performed on bulk samples at extreme heating and cooling rates and in high...     

Mathematical Model and Numerical Simulation of Conductometric Biosensor of Urea

In this article, a mathematical model was developed to describe and optimize the configuration of the urea biosensor. The biosensor is based on interdigitated gold microelectrodes modified with a urease enzyme membrane. The model presented here focuses on the enzymatic reaction and/or diffusion phenomena that occur in the enzyme membrane and in the diffusion layer. Numerical resolution of differential equations was performed using the finite difference technique. The mathematical model was validated using experimental biosensor data. The responses of the biosensor to various conditions were simulated to guide experiments, improve analytical performance, and reduce development costs.     

Development of a Chitosan/Nickel Phthalocyanine Composite Based Conductometric Micro-sensor for Methanol Detection

Thin-film composite of chitosan/nickel phthalocyanine (NiPc) was electrochemically deposited on the fingers of interdigitated gold electrodes, applying chronoamperometric polymerization technique. The presence of crystallized NiPc in the chitosan was confirmed by EDX and FTIR analysis. Acetone, ethanol, and methanol gas-sensing properties of the films prepared at optimum conditions were studied at atmospheric temperature, through differential measurements at an optimized frequency of 10 kHz, using a lock-in amplifier. The conductometric sensor presents the highest sensitivity of 60.2 μS.cm⁻¹(v/v) for methanol and 700 ppm as the limit of detection. For validation, the methanol content of a commercial rubbing alcohol was determined.     

Electrokinetic characterization of hybrid NOA 81-glass microchips: Application to protein microchip electrophoresis with indirect fluorescence detection

A low-cost and straightforward hybrid NOA (Norland optical adhesive) 81-glass microchip electrophoresis device was designed and developed for protein separation using indirect fluorescence detection. This new microchip was first characterized in terms of surface charge density via electroosmotic mobility measurement and stability over time. A systematic determination of the electroosmotic mobility (μ_eo) over a wide pH range (2–10) and at various ionic strengths (20–50 mM) was developed for the first time via the neutral marker approach in an original simple frontal methodology. The evolution of μ_eo was proved consistent with the silanol and thiol functions arising from the glass and the NOA materials, respectively. The repeatability and reproducibility of the measurements on different microchips (RSD < 14%) and within 15 days (less than 5% decrease) were successfully demonstrated. The microchip was then applied for the efficient electrophoretic separation of proteins in a zonal mode coupled with indirect fluorescence detection, which is, to our knowledge, the first proof of concept of capillary zone electrophoresis in this hybrid microsystem.