The Ambident Reactivity of 2,4,6‐Tris(trifluoromethanesulfonyl)anisole in Methanol: Using the SO2CF3 Group as a Tool to Reach the Superelectrophilic Dimension in σ‐Complexation Processes

The kinetics of σ complexation of 2,4,6‐tris(trifluoromethanesulfonyl)anisole ( 7 d ) have been investigated over a large pH range of 2–13.70 at T=20 °C in methanol. Two competitive processes associated with the initial addition of MeO^? at the unsubstituted 3‐position of 7 d to give a 1,3‐dimethoxy adduct ( 9 d ‐Me) and a subsequent and slow conversion of this species into a 1,1‐dimethoxy isomer ( 8 d ‐Me) have been identified. Both adducts 8 d ‐Me and 9 d ‐Me are 10⁵–10⁶ times more stable than the related adducts 8 a ‐Me and 9 a ‐Me of 2,4,6‐trinitroanisole ( 7 a ), a conventional reference aromatic electrophile in Meisenheimer complex chemistry. The high stability of 8 d ‐Me and 9 d ‐Me is shown to derive from greater rates of formation and lower rates of decomposition than previously determined for 8 a ‐Me and 9 a ‐Me, thereby emphasising the especially high activation of a benzene ring by SO₂CF₃ group(s). Analysis of the collected rate and equilibrium data for σ complexation in the anisole series 2,4,6‐tris(SO₂CF₃)‐, 2,6‐bis(SO₂CF₃)‐4‐nitro‐, 4‐SO₂CF₃‐2,6‐dinitro‐ and 2,4,6‐trinitro‐ supports the idea that the especially high capacity of resonance stabilisation of the negative charge of the adducts through an F_π‐type (as defined in ref. 49 ) polarisation effect is a major factor that accounts for the strong activation provided by SO₂CF₃ groups. A most significant result is the finding that the 1,1‐dimethoxy adduct 8 d ‐Me is by far the most stable benzene σ adduct so far reported. With a p value of 7.32, this adduct is formed exclusively through methanol addition up to pH≈10. This is consistent with the location of 7 d in the superelectrophilic region defined by p ≤9.5–10.5. For comparison, the solvent contribution is negligible in the formation of the 1,3‐isomer 9 d ‐Me, the p (10.59) of which is situated on the upper limit of the boundary. Taking advantage of the simple relationship linking pK_a values for σ complexation in methanol and water, a ranking of the triflone 7 d on the general thermodynamic scale constructed for Meisenheimer electrophiles in water is informative. An approximate calibration on the electrophilicity scale kinetically derived by Mayr et al. has also been made.     

Complexation of N-methyl-4-(p-methyl benzoyl)-pyridinium methyl cation and its neutral analogue by cucurbit[7]uril and β-cyclodextrin: a computational study

In this work, molecular dynamics (MD) simulations have been conducted to study the inclusion complexes between cucurbit[7]uril (CB7) and β-cyclodextrin (β-CD) with N-methyl-4-(p-methyl benzoyl)-pyridinium methyl cation, and N-methyl-4-(p-methyl benzoyl)-pyridine in aqueous solutions to gain detailed information about the dynamics and mechanism of the inclusion complexes. The obtained MD trajectories were used to estimate the binding free energy of the studied complexes using the molecular mechanics/Poisson Bolzmann surface area (MM–PBSA) method. Results indicate preference of CB7 to bind to the cationic guest more than the neutral guest, whereas β-CD exhibits more or less the same affinity to complex with either species. Furthermore it was interesting to note that β-CD forms more stable complexes with both guests than CB7. Average structure of each complex and the distances between the center of masses of the guest and the host were also discussed.     

Reaction prospecting by 31P NMR: enantioselective rhodium-DuPhos catalysed addition of ZnMe2 to diphenylphosphinoylimines

Chiral shift ³¹P NMR spectroscopy allows the identification of ligand leads in asymmetric catalyst systems for ZnMe₂ addition to ArCHNP(O)Ph₂. Subsequent GC-based optimisation shows [RhCl(CH₂CH₂)₂]₂ and (R,R)-MeDuPhos to be the optimal pre-catalyst combination (product in 78–93% ee). Transmetallation of [(MeDuPhos)Rh{N(P(O)Ph₂–CHMeAr}] with ZnMe₂ appears to be the rate limiting step of the catalytic cycle as competing coordination by the imine starting material leads to Ph₂P(O)NHCH₂Ar via MVP hydrogen-transfer. This limitation can largely be overcome by the slow addition of the imine.     

Complexes of tetra-tert-butyl-tetraazaporphine with Al(III) and Zr(IV) cations as fluoride selective ionophores

In this work, complexes of Zr(IV) and Al(III) cations with 2,7,12,17-tetra-tert-butyl-5,10,15,20-tetraazaporphine (TAP) were tested as ionophores in plasticized PVC membranes of ion-selective electrodes. It was found that both tested ionophores show enhanced affinity towards fluoride anion. High fluoride selectivity was observed in the presence of anionic or cationic additives in the membrane, which indicates that proposed compounds work according to charged or neutral carrier mechanism, depending on membrane composition and pretreatment.tert-Butyl substituents, present in the structure of tested compounds, were supposed to prevent formation of ionophore dimers within the membrane phase. This process was found to be responsible for some unfavorable potentiometric properties of electrodes based on complexes of Zr(IV) and Al(III) cations with porphyrins (compounds closely related to tetra-tert-butyl-5,10,15,20-tetraazaporphine). As it was shown using spectrophotometrical measurements, Al(III)-TAP was not susceptible to dimerization, while dimer formation was observed for Zr(IV)-TAP. In full agreement with these observations, electrodes with membranes containing Al(III)-TAP responded in near-Nernstian and fast manner towards fluoride anion, while the employment of Zr(IV)-TAP as ionophore resulted in super-Nernstian and sluggish response. Plasticized PVC membranes doped with Al(III)-TAP and 20 mol% of lipophilic anionic additives shown remarkable F⁻ selectivity, with selectivity coefficients, , as follows: −4.4 (Y⁻Br⁻), −4.3 (Cl⁻), −4.2 (NO₃⁻), −3.6 (SCN⁻), −2.9 (ClO₄⁻).     

Synthesis and characterization of La0.8Sr1.2Co0.5M0.5O4−δ (M=Fe, Mn)

The M⁴⁺-containing K₂NiF₄-type phases La_0.8Sr_1.2Co_0.5Fe_0.5O₄ and La_0.8Sr_1.2Co_0.5Mn_0.5O₄ have been synthesized by a sol–gel procedure and characterized by X-ray powder diffraction, thermal analysis, neutron powder diffraction and Mössbauer spectroscopy. Oxide ion vacancies are created in these materials via reduction of M⁴⁺ to M³⁺ and of Co³⁺ to Co²⁺. The vacancies are confined to the equatorial planes of the K₂NiF₄-type structure. A partial reduction of Mn³⁺ to Mn²⁺ also occurs to achieve the oxygen stoichiometry in La_0.8Sr_1.2Co_0.5Mn_0.5O_3.6. La_0.8Sr_1.2Co_0.5Fe_0.5O_3.65 contains Co²⁺ and Fe³⁺ ions which interact antiferromagnetically and result in noncollinear magnetic order consistent with the tetragonal symmetry. Competing ferromagnetic and antiferromagnetic interactions in La_0.8Sr_1.2Co_0.5Fe_0.5O₄, La_0.8Sr_1.2Co_0.5Mn_0.5O₄ and La_0.8Sr_1.2Co_0.5Mn_0.5O_3.6 induce spin glass properties in these phases.     

Development and Validation of HPLC,TLC and Derivative Spectrophotometric Methods for the Analysis of Ezetimibe in the Presence of Alkaline Induced Degradation Products

Reversed phase‐high performance liquid chromatography (RP‐HPLC), thin layer chromatography (TLC) densitometry and first derivative spectrophotometry (1D) techniques are developed and validated as a stability‐indicating assay of ezetimibe in the presence of alkaline induced degradation products. RP‐HPLC method involves an isocratic elution on a Phenomenex Luna 5μ C₁₈ column using acetonitrile: water: glacial acetic acid (50:50:0.1 v/v/v) as a mobile phase at a flow rate of 1.5 mL/min. and a UV detector at 235 nm. TLC densitometric method is based on the difference in Rf‐values between the intact drug and its degradation products on aluminum‐packed silica gel 60 F₂₅₄ TLC plates as stationary phase with isopropanol: ammonia 33% (9:1 v/v) as a developing mobile phase. On the fluorescent plates, the spots were located by fluorescence quenching and the densitometric analysis was carried out at 250 nm. Derivative spectrophotometry, the zero‐crossing method, ezetimibe was determined using first derivative at 261 nm in the presence of its degradation products. Calibration graphs of the three suggested methods are linear in the concentration ranges 1–10 mcg/mL, 0.1–1 mg/mL and 1–16 mcg/mL with a mean percentage accuracy of 99.05 ± 0.54%, 99.46 ± 0.63% and 99.24 ± 0.82% of bulk powder, respectively. The three proposed methods were successfully applied for the determination of ezetimibe in raw material and pharmaceutical dosage form; the results were statistically analyzed and compared with those obtained by the reported method. Validation parameters were determined for linearity, accuracy and precision; selectivity and robustness and were assessed by applying the standard addition technique.     

Synthesis and characterization of electrical conducting porous carbon structures based on resorcinol–formaldehyde

Electrical conducting carbon (ECC) porous structures were explored by changing the pyrolysis temperature of organic xerogel compounds prepared by sol–gel method from resorcinol–formaldehyde (RF) mixtures in acetone using picric acid as catalyst. The effect of this preparation parameter on the structural and electrical properties of the obtained ECCs was studied. The analysis of the obtained results revealed that the polymeric insulating xerogel phase was transformed progressively with pyrolysis temperature into carbon conducting phase; this means the formation of long continuous conducting path for charge carriers to move inside the structure with thermal treatment and the samples exhibited tangible percolation behaviour where the percolation threshold can be determined by pyrolysis temperature. The temperature-dependent conductivity of the obtained ECC structures shows a semi-conducting behaviour and the I(V) characteristics present a negative differential resistance. The results obtained from STM micrographs revealed that the obtained ECC structures consist of porous electrical conducting carbon materials.     

Structural Determination of a Photochemically Active Diplatinum Molecule by Time‐Resolved EXAFS Spectroscopy

Metallica : A large contraction of the Pt? Pt bond in the triplet excited state of the photoreactive [Pt₂(P₂O₅H₂)₄]^4? ion is determined by time‐resolved X‐ray absorption spectroscopy (see picture). The strengthening of the Pt? Pt interaction is accompanied by a weakening of the ligand coordination bonds, resulting in an elongation of the platinum–ligand bond that is determined for the first time.