Thermal investigations on γ-radiation processed natural medicinal products (Ashwagandha,Amla and Hartiki)

DSC and TG studies were carried out on -radiation processed Indian natural products of medicinal importance, namely Ashwagandha (Withania Somnifera), Amla (Emblica Officinalis) and Hartiki (Terminalia chebula). DSC thermoanalytical curves were recorded from 35 to 400°C in air and nitrogen atmosphere. Similarly, TG thermoanalytical curves were taken from 35 to 700°C in air and nitrogen atmosphere. Irradiated products gave significantly different thermoanalytical profiles in comparison to non-irradiated samples. The differences were observed above decomposition temperature of 200°C and were non-linear with respect to radiation dose. Partial oxidation of the products during irradiation in air could be responsible for the observed differences.     

Ca(2.5)Sr(0.5)GaMn2O8: diamagnetic Ga in control of the structural and electronic properties of a bilayered manganate

The temperature dependence of the crystal structure and electronic properties of brownmillerite-like Ca(2.5)Sr(0.5)GaMn(2)O(8) has been studied by neutron powder diffraction and muSR spectroscopy. The results show that short-range 2D magnetic order begins to develop within the perovskite-like bilayers of MnO(6) octahedra approximately 50 K above the 3D Néel temperature of approximately 150 K. The bilayers show a structural response to the onset of magnetism throughout this temperature range whereas the GaO(4) layers that separate the bilayers only respond below the 3D ordering temperature. XANES spectroscopy shows that the sample contains Mn(3+) and Mn(4+) cations in a 1:1 ratio, and the behavior in the region of the Néel transition is interpreted as a local charge ordering. Electron diffraction and high-resolution electron microscopy have been used to show that the local microstructure is more complex than the average structure revealed by neutron diffraction, and that microdomains exist in which the GaO(4) tetrahedra show different orientations. It is argued that the bonding requirements of diamagnetic gallium control the electronic behavior within the perovskite-like bilayers.     

Immobilization and electrochemical redox behavior of cytochrome c on fullerene film-modified electrodes

Two different fullerene film-modified electrodes were prepared and used for surface immobilization and electrochemical property investigation of horse heart cytochrome c (cyt c). Both a pristine fullerene film and fullerene-palladium (C(60)-Pd) polymer film-modified platinum, glassy carbon and indium-tin-oxide (ITO) electrodes were used. The immobilized cyt c was characterized by piezoelectric microgravimetry at a quartz crystal microbalance (QCM), UV-visible absorption, and X-ray photoelectron spectroscopy (XPS), as well as cyclic voltammetry (CV) techniques. The UV-visible spectral studies revealed a small blue shift of both the Soret and Q band of the heme moiety of cyt c, immobilized on the C(60)-Pd polymer film-modified ITO electrode, as compared to the bands of cyt c in solution suggesting that molecules of cyt c are densely packed onto the surface of the modified electrode. The CV studies revealed a quasi-reversible electrode behavior of the heme moiety indicating the occurrence of kinetically hindered electron transfer. A good agreement was found between the values of cyt c electrode surface coverage determined by piezoelectric microgravimetry and cyclic voltammetry. For piezoelectric microgravimetry, these values ranged from 0.5 x 10(-10) to 2.5 x 10(-10) mol cm(-2), depending upon the amount of cyt c present in solution and the time allowed for immobilization, which compared with a value of 3.6+/-0.4 x 10(-10) mol cm(-2) determined by CV. The possible mechanisms of cyt c immobilization on the C(60) film and C(60)-Pd film-modified electrodes are also discussed.     

A new protecting group for the exocyclic amino groups of nucleosides

A new protecting group has been developed for the exocyclic amino groups of nucleosides that occur in DNA. 3-Phenyl-[{N-(2-trimethylsilyl-ethoxycarbonyl)-2-amino}]-propanoic acid used as the protective agent.     

In vitro and in vivo studies of androst‐4‐ene‐3,6,17‐trione in horses by gas chromatography–mass spectrometry

This paper describes the application of gas chromatography–mass spectrometry (GC‐MS) for in vitro and in vivo studies of 6‐OXO in horses, with a special aim to identify the most appropriate target metabolite to be monitored for controlling the administration of 6‐OXO in racehorses. In vitro studies of 6‐OXO were performed using horse liver microsomes. The major biotransformation observed was reduction of one keto group at the C3 or C6 positions. Three in vitro metabolites, namely 6α‐hydroxyandrost‐4‐ene‐3,17‐dione (M1), 3α‐hydroxyandrost‐4‐ene‐6,17‐dione (M2a) and 3β‐hydroxyandrost‐4‐ene‐6,17‐dione (M2b) were identified. For the in vivo studies, two thoroughbred geldings were each administered orally with 500 mg of androst‐4‐ene‐3,6,17‐trione (5 capsules of 6‐OXO_®) by stomach tubing. The results revealed that 6‐OXO was extensively metabolized. The three in vitro metabolites (M1, M2a and M2b) identified earlier were all detected in post‐administration urine samples. In addition, seven other urinary metabolites, derived from a further reduction of either one of the remaining keto groups or one of the remaining keto groups and the olefin group, were identified. These metabolites included 6α,17β‐dihydroxyandrost‐4‐en‐3‐one (M3a), 6,17‐dihydroxyandrost‐4‐en‐3‐one (M3b and M3c), 3β,6β‐dihydroxyandrost‐4‐en‐17‐one (M4a), 3,6‐dihydroxyandrost‐4‐en‐17‐one (M4b), 3,6‐dihydroxyandrostan‐17‐one (M5) and 3,17‐dihydroxyandrostan‐6‐one (M6). The longest detection time observed in urine was up to 46 h for the M6 metabolite. For blood samples, the peak 6‐OXO plasma concentration was observed 1 h post administration. Plasma 6‐OXO decreased rapidly and was not detectable 12 h post administration. Copyright © 2009 John Wiley & Sons, Ltd.     

Investigation of the Mechanism of Colloidal Silicalite‐1 Crystallization by Using DLS,SAXS, and 29Si NMR Spectroscopy

Colloidal silicalite‐1 zeolite was crystallized from a concentrated clear sol prepared from tetraethylorthosilicate (TEOS) and aqueous tetrapropylammonium hydroxide (TPAOH) solution at 95 °C. The silicate speciation was monitored by using dynamic light scattering (DLS), synchrotron small‐angle X‐ray scattering (SAXS), and quantitative liquid‐state ²⁹Si NMR spectroscopy. The silicon atoms were present in dissolved oligomers, two discrete nanoparticle populations approximately 2 and 6 nm in size, and crystals. On the basis of new insight into the evolution of the different nanoparticle populations and of the silicate connectivity in the nanoparticles, a refined crystallization mechanism was derived. Upon combining the reagents, different types of nanoparticles (ca. 2 nm) are formed. A fraction of these nanoparticles with the least condensed silicate structure does not participate in the crystallization process. After completion of the crystallization, they represent the residual silicon atoms. Nanoparticles with a more condensed silicate network grow until approximately 6 nm and evolve into building blocks for nucleation and growth of the silicalite‐1 crystals. The silicate network connectivity of nanoparticles suitable for nucleation and growth increasingly resembles that of the final zeolite. This new insight into the two classes of nanoparticles will be useful to tune the syntheses of silicalite‐1 for maximum yield.     

XNBR/LDH nanocomposites: Effect of vulcanization and organic modifier on nanofiller dispersion and strain‐induced crystallization

In elastomer/organo clay nanocomposites, the morphological characteristics, and hence the mechanical properties, of the vulcanizates are strongly influenced by the organic modifier and the vulcanization process. When the elastomer itself undergoes strain‐induced crystallization, both the organic modifier and the dispersed filler particles could significantly influence the crystallization process. These phenomena are very common in case of natural rubber‐based vulcanizates. In this study, the similar effects have been demonstrated with carboxylated nitrile rubber (XNBR) and organically modified layered double hydroxide (O‐LDH)‐based nanocomposites. The effect of size of the organic modifier was obviously visible on the interlayer distance of O‐LDH and also on the morphological reorganization of the dispersed O‐LDH particles during vulcanization process. The strain‐induced crystallization of the XNBR was found to be strongly dependent on the morphological change that occurs during vulcanization process. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Thermoelectric properties of HPHT sintered In-doped Pb0.5Sn0.5Te

The thermoelectric properties of Pb_0.5Sn_0.5Te doped with In at 1.0, 2.0, and 3.0×10¹⁹/cm³ and sintered at a high pressure and high temperature (HPHT) of 4.0 GPa and 800 or 900 °C, respectively, have been studied. All samples show p-type semiconducting behavior with positive thermopower. We find that HPHT sintering of conventionally synthesized materials improves their thermoelectric properties. The highest power factor is obtained for In doping of 2.0×10¹⁹/cm³ with 13.5 μW/cm K² at 230 °C. The corresponding figure of merit is 1.43×10⁻³/K. This represents a twofold improvement in thermoelectric figure of merit, compared to the conventionally sintered materials reported in the literature. When exposed to 400 °C for 10 days, samples sintered at 900 °C exhibit more stable thermoelectric properties, while the properties of those sintered at 800 °C deteriorated. These results demonstrate that HPHT sintering is a viable and controllable way of tuning the thermoelectric properties of PbTe-based materials.