排序方式: 共有56条查询结果,搜索用时 15 毫秒
31.
32.
This paper presents an investigation of specific optical fiber core mode leakage behavior that occurs in high-power double-clad fiber lasers as a result of thermally-induced refractive index variations. A model of the power transfer between the core modes and the cladding modes during thermally-induced refractive index variations is established based on the mode coupling theory. The results of numerical simulations based on actual laser parameters are presented. Experimental measurements were also carried out, the results showed good agreement with the corresponding simulation results. 相似文献
33.
We study internal features of fiber fuse in a Yb-doped double-clad fiber. The samples of fiber fuse are acquired at the power level of 3 kW in an all-fiber forward-pumped master oscillator power amplifier configuration fiber laser that is built specially for fiber fuse analyses. At this high power level, drastic refractive-index redistribution arises in an expended high refractive index area around the bullet-shaped voids of fiber fuse. Electron spin resonance analyses on post-fiber-fuse samples of the Yb-doped double-clad fiber indicate rising Frenkel defect concentration, meanwhile showing a new resonance center that is different from the ones of the Ge-doped fibers studied previously. This new resonance center probably suggests the generation of Al-oxygen hole center, a kind of defect formed during the catastrophic fuse process. 相似文献
34.
Single output LD end-pumped passively mode-locked Nd:YVO4 laser with semiconductor saturable absorber mirror
下载免费PDF全文
![点击此处可从《中国物理 B》网站下载免费的PDF全文](/ch/ext_images/free.gif)
A quarter-wave plate and the thin film polarizer(TFP) are used for the LD end-pumped passively mode-locked Nd:YVO4 laser with semiconductor saturable absorber mirror(SESAM) to obtain a single beam output with a total power of 4.8 W.An optical-optical efficiency is achieved to be 24% for a stable CW mode-locking operation at 1064 nm,with a pulse repetition rate of 70 MHz and pulse width of 16 ps.The multipulse in the pulse sequence is eliminated for reaching a peak power as high as 4 kW. 相似文献
35.
36.
37.
An acoustic-optic Q-switched all-fiber laser With a high-repetition-rate, a short pulse width, a wide spectrum, and a high conversion efficiency is experimentally demonstrated. In the laser configuration, a (1+1)x 1 side-pumping coupler is introduced to perform backward pumping, and a 10/130%tm Yb fiber is adopted. The acoustic-optic component operates in the first direction, achieving a Q-switched pulse with a repetition rate adjustable in the range of 20 kHz-80 kHz. Under a repetition rate of 20 kHz and a pump power of 6.76 W, the fiber laser obtains a highly efficient and stable pulse output, with an average power of 4.3 W, a pulse width of 56 ns, a peak power of 3.83 kW, and a power density of 1.39x 101~ W/cm2. Particularly, the optic-optic conversion efficiency of the laser reaches as high as 64%. Another feature of the pulsed laser is that the high reflection mirror reflects the pump light as well, which brings the secondary absorption of the pump power into the gain fiber. 相似文献
38.
依据仿生合成的原理,选择无水MgCl2和无水Na2CO3作为反应原料,通过L-天门冬氨酸和五种无机表面活性剂分别对晶体生长进行调控,应用XRD、SEM对晶体的物相组成以及形貌结构进行表征.试验结果表明当表面活性剂为L-天门冬氨酸时,晶体生长效果最佳.又通过以L-天门冬氨酸添加量和体系pH值为参数变量进行研究,结果表明L-天门冬氨酸质量分数为0.15;,体系pH为9.5为最佳条件,有毫米级束状三水碳酸镁晶体的生成,并对L-天门冬氨酸在仿生合成三水碳酸镁过程中的作用机理进行了初步探讨. 相似文献
39.
40.
本文以MgCl2·6H2O和NH4HCO3作为反应物料,采用低温液相合成法制备出三水碳酸镁晶须.考查了Mg2+初始浓度、NH4HCO3溶液的滴加速度、搅拌速度及表面活性剂种类等因素对三水碳酸镁晶须的长度及长径比的影响.研究结果表明:在Mg2+初始浓度为0.5 mol/L、NH4HCO3的滴加速度5 mL/min、搅拌速度为120 r/min、选用KH2PO4作表面活性剂的试验条件下,可以合成出长度325 μm、直径8.25 μm,长径比高达32的三水碳酸镁晶须产品. 相似文献