All-fiber linearly polarized laser oscillator by fiber coiling loss control

In this paper,we demonstrate an all-fiber linearly polarized fiber laser oscillator.The single polarization of the oscillator is achieved through the careful designing of the active fiber coiling.The relationship between fiber coiling diameter and polarization extinction ratio and optical efficiency is studied,whose results lead to an optimized system.The thermal management of the oscillator is also refined,which allows the oscillator to reach a maximum output power of44.1 W with an optical-to-optical efficiency of 57.9%.A high average polarization extinction ratio of 21.6 d B is achieved during a 2-hour stability test.The oscillator also owns a narrow 3-d B bandwidth of 0.1 nm,as well as near-diffraction-limit beam quality of M~2~ 1.14.     

气相色谱法测定二咖啡酰奎尼酸原料药中的有机溶剂残留量

以1,2-二氯乙烷作为内标,气相色谱法定量检测二咖啡酰奎尼酸原料药中7种有机溶剂残留量。色谱柱：DB-624,30m×0.32mm×1.8μm,载气为H2,检测器为FID,采用程序升温的方法。7种残留溶剂的线性关系良好（r〉0.9914）,回收率为92.5%—98.5%,最小检出限量均为0.01%。本方法简便、灵敏、准确,可用于二咖啡酰奎尼酸原料药残留溶剂的质量控制。     

Fiber fuse behavior in k W-level continuous-wave double-clad field laser

In this study, original experimental data for fiber fuse in k W-level continuous-wave(CW) high power double-clad fiber(DCF) laser are reported. The propagating velocity of the fuse is 9.68 m/s in a 3.1-k W Yb-doped DCF laser. Three other cases in Yb-doped DCF are also observed. We think that the ignition of fiber fuse is caused by thermal mechanism,and the formation of bullet-shaped tracks is attributed to the optical discharge and temperature gradient. The inducements of initial fuse and formation of bullet-shaped voids are analyzed. This investigation of fiber fuse helps better understand the fiber fuse behavior, in order to avoid the catastrophic destruction caused by fiber fuse in high power fiber laser.     

高密度光盘存储中的梯形光栅设计和误差分析

为了符合实际加工情形，推导了梯形相位光栅衍射效率，与矩形光栅作了比较，设计其用作高密度光盘存储光学头分光束器件时的各参数，并分析推导了系统和随机加工误差对光栅性能的影响及设计原则。     

Influence of mode competition on beam quality of fiber amplifier

Theoretical and experimental studies of the influence of the mode competition on the output beam quality of fiber amplifiers are presented. Rate equations and modal decomposition method are used in the theoretical model. In the experiment, the output beam-quality factor of a fiber amplifier, which is based on a Yb-doped double-clad large mode area fiber as a function of the seed beam quality and the pump power of the amplifier, is measured. The experimental results are consistent with the theoretical analysis.     

Investigation on mode matching including thermal effects in LD end-pumped passively mode-locked Nd：YVO_4 laser

We design a laser diode （LD） end-pumped passively mode-locked solid-state laser with a semiconductor saturable absorber mirror. Mode-matching efficiency in the active medium including the thermal effect is analyzed, and the optimum mode-matching coefficient is obtained by optimizing the pump mode. In the experiment, a total power of 4.2 W stable pulse sequences without multipulse at 1064 nm is obtained with a pulse repetition rate of 86 MHz and a pulse width of 13 ps, corresponding to a high optical to optical efficiency of 44%.     

高斯反射率镜单谐振光参量振荡器模式分析

采用高斯光束传输矩阵描述光参量谐振腔的行为,通过迭代计算模拟高斯光抽运高斯反射镜单谐振光参量振荡器的振荡过程,分析了谐振腔参数和抽运光口径对腔内输出模式的影响。报道了1 064μm脉冲抽运平 GRM腔单谐振非临界相位匹配KTP光参量振荡器的实验,其结果与理论分析相符。     

GaAs被动调Q兼输出耦合Nd∶YVO4激光特性研究

利用可饱和吸收半导体GaAs作为被动调Q元件和FP输出耦合镜,实现了半导体激光器(LD)抽运Nd:YVO4激光调Q运转,获得脉宽度为47ns,重复频率为1183kHz,平均功率为430mW,光束质量为M2=113的TEM00激光基横模输出,调Q抽运阈值为1700mW.并数值求解了含有GaAs被动调Q兼输出耦合的速率方程,分析了GaAs被动调Q机理以及脉宽宽度、重复频率、平均功率随抽运速率、腔长的变化关系,理论与实验结果相一致.为多功能综合型微型调Q固体激光器提供了简单有效的方法. 关键词： 被动调Q 输出耦合 GaAs     

高长径比三水碳酸镁晶须的合成研究

采用低温水溶液法合成三水碳酸镁晶须,考查了反应温度、反应时间、表面活性剂用量及反应溶液初始pH等因素对三水碳酸镁晶须的长度及长径比的影响.研究结果表明:在反应温度45～50℃、反应时间50～60 min、表面活性剂添加量(质量分数)为1;、反应溶液初始pH =9.5的条件下,可以合成出高长径比三水碳酸镁晶须产品.     

Optical properties of ytterbium-doped tandem-pumped fiber oscillator

With the rapid development of ytterbium-doped fiber lasers, some obtrusive limitations on power scaling appeared. In order to avoid these problems, a scheme called tandem pumping is introduced into the fiber laser field. In this paper, the optical properties of an ytterbium-doped tandem-pumped fiber oscillator are presented. According to the oscillator profile, the proper gain fiber type and pump wavelength range are picked out, under the comprehensive consideration of laser conversion efficiency and beam quality. In addition, the photodarkening performances of tandem pumping lasers and conventional ones are compared based on practical application, with all possible impact parameters taken into account. Moreover, an all-fibered tandem-pumped oscillator centered at 1079.5 nm is built, in the way of clad pumping by a 1030-nm fiber laser. The laser power of the oscillator reaches 7 W, with an opto-optic efficiency of 82.4%.