改善Rh基催化剂上CO加氢生成C2含氧化物性能的本质及途径

 从CO加氢反应的热力学出发,分析了C2含氧化合物生成反应的途径和机理,阐述了改善Rh基催化剂上生成C2含氧化合物性能的本质以及实现的途径. 结果显示,相对于CO加氢生成烃类的反应,乙醇、乙醛和乙酸等C2含氧化合物的生成在热力学上是极为不利的; 最重要、最有效的提高C2含氧化合物生成活性的手段是开发具有高选择性的催化剂. 通过对浸渍方法和还原条件的选择,适当地抑制了Rh-Mn-Li-Fe/SiO2催化剂加氢活性,最终改善了催化剂的加氢性能,使得甲烷选择性降至6.3%, 而生成C2含氧化合物的选择性达到91.6%, 且保持有较高的时空收率.     

运用Poincaré-Miranda定理数值验证变分不等式解的存在性

本文运用Poincaré-Miranda定理数值验证变分不等式问题解的存在性.证明这一新方法相对于已有的方法更具有普遍性,并通过数值例子说明本方法的高效性.     

考虑空化效应的螺旋槽机械密封液膜动力学特性研究

考虑液膜空化效应的影响,研究螺旋槽液体润滑机械密封的动力学特性. 基于液体润滑理论和小扰动法,建立了考虑液膜空化的密封微扰膜压控制方程,采用有限单元法对端面液膜三自由度微扰下的液膜刚度和阻尼系数进行了数值求解,分析了不同参数对液膜密封动力系数的影响. 螺旋槽深度在10 μm左右、槽坝比在0.75左右、槽宽比在0.4左右,螺旋角在9°左右时液膜具有最大的轴向和角向刚度系数. 螺旋槽深度在5 μm左右、槽宽比在0.6左右、螺旋角在20°左右时,两角向交叉阻尼绝对值最大. 初始偏角的存在使密封压力呈现非对称性,从而使两角向动力系数绝对值不再相等. 液膜轴向刚度k_zz在数量级上远大于其余液膜刚度值,液膜轴向阻尼d_zz、角向阻尼d_αα和d_ββ远大于液膜其余阻尼值且随着转速和间隙的增大而减小.      

手性SalenCOⅡ配合物与氨基酸酯类客体的分子识别研究

用紫外-可见分光光度法研究了手性SalenCoⅡ配合物对4对对映异构的手性氨基酸酯类客体在CH2Cl2中的分子识别,发现手性SalenCoⅡ配合物与此类客体的配位数为1.各客体缔合常数均为KD＞KL,且按K(LeuOMe)＞K(AlaOMe)＞K(SerOMe)＞K(TyrOMe)的顺序依次减小,测定了识别过程的△rGmθ,△rHθm,△rSmθ,发现该反应是放热、熵减少的过程.采用分子力学的方法考察了主客体的最佳优势构象,对该优势构象进行量子化学计算,较好地解释了实验事实.     

HPLC法拆分粉唑醇对映体

HPLC法拆分粉唑醇对映体;粉唑醇;对映体;分离;手性固定相     

纳米材料在生物学及医学领域的应用

任何化学物质如金属、半导体、核-壳杂化材料及有机高分子等均可形成纳米材料,由于纳米材料较小的粒径、较大的比表面积,使其具有优异的光学、电学、磁学及催化性能.利用物理、化学、生物学及医学等手段,可以对纳米材料的尺度、粒径分布、形貌、表面性质及带隙等进行调控,从而使其具有特殊的性质及应用.本文就纳米材料在生物学及医学领域包...     

一种用于大容量逆流色谱制备的立式多层螺旋管行星式离心机

Owing to no complications caused by solid supports, such as adsorptive sample loss and deactivation, tailing of solute peaks, and contamination, countercurrent chromatography (CCC) has been an area of intense research since the first introduction of CCC in 1970,[1] and various apparatus and broad applications have been advanced[2,3]. For these developments, the type-J synchronous planet centrifuge has received considerable attention, which relies not only on its relatively simple mechanic design, but also on its high partition efficiency and short elution time caused by mixing and settling for the efficient chromatographic separations. In the past, however, almost all of type-J centrifuges rotated slowly were disposed horizontally due to the original design and some experiments that gravis plays an important role at a low rotary speed as similar to type-V rotating multilayer helical tube in unit gravity[4-9]. In fact,we discovered that the upright apparatus holds more retention of stationary phase than the horiziontal aparatus when large standard tubings were used as mutilayer coil column and the aparatus was operated under same contions. We report here a new coil planet centrifuge with four upright cylindrical columns for large scale countercurrent chromatographic preparation. The design principle and apparatus of UCCC is as samilar to type-J multilayer coil planet centrifuge. Four uptight cylindrical column holders are symmetrically arranged around the centrifuge axis as similar to the type-J HSCCC with three horizontal multilayer coils connected in series[8] . A series of experiments indicat that upright CCC has many advantages over the horizontal CCC when using a large-bore tube as multilayer coil column for large scale countercurrent chromatographic separation.Upright CCC provide a versatile countercurrent chromatographic method for large-scale preparation from very crude sample. It has good preparative capacity and flexible suitability to various sample and two-phase system.The present apparatus not only can be operated at a high speed as similar as commonly used HSCCC for the system having short settling time and but also can be run at a low speed for the system having relative long settling time. Because of automatical control and seal-free flow through device, the uptight CCC apparatus may be readily scaled up to industrial preparation.     

一种高灵敏、多响应的Zn-MOF荧光传感器对Fe3+、2，4，6-三硝基苯酚和奥硝唑的检测

在水热条件下基于H₄bta(1,2,3,5-苯四酸)和bpy(4,4''-联吡啶)配体设计、合成了一个锌的金属有机骨架(Zn-MOF){[Zn₂(bta)(bpy)(H₂O)₂]·H₂O}_n(1),并用元素分析、红外光谱、X射线单晶衍射等对其进行了结构表征。MOF 1为三维网状结构。完全去质子化的(bta)^4-配体采用了μ₆-η¹-η²-η²-η¹螯合桥联配位方式。有意思的是,MOF 1是一种高灵敏度、选择性好、多响应的荧光传感器,可用于Fe³⁺、2,4,6-三硝基苯酚和奥硝唑的快速检测。此外还研究了1的热稳定性。     

压电弯曲元的夹层梁解析模型

压电弯曲元是一类传感和作动器件,已得到广泛的应用．基于一阶剪切变形理论发展了压电弯曲元夹层梁解析模型,对梁截面采用统一转角并将耦合电势沿厚度的分布假设为二次函数,进一步修正了横向剪应变对电位移的影响．以弯曲元简支梁自由振动为例进行数值分析,解析模型解与二维精确解相比具有良好的精度,为分析弯曲元动力机电响应提供了良好的解析模型．     

光源形状对干涉场衬比度的影响

推导出面光源照明时杨氏干涉实验干涉场的光强分布公式,分别讨论了矩孔、圆环、圆盘光源照明时杨氏干涉实验干涉场的衬比度及光源的极限宽度。结果表明这些光源照明时干涉场的衬比度各不相同,它们的极限宽度可用同一公式表示。