强光电离团簇并行数值模拟

为研究强激光电离氢原子团簇,在理论上采用1维氢原子团簇的经典粒子动力学模型,结合粒子对(PP)算法及粒子模拟（PIC）方法,采用自行搭建的9节点并行集群系统,利用消息传递接口（MPI)与OpenMP混合编程模型进行了并行数值模拟计算,获得了较为理想的计算加速比。并且引入了弛豫时间参数,有效地处理了粒子间的碰撞过程,在极大简化计算量的同时,保留了物理本质。所得模拟结果与已有的实验结果符合较好,表明该并行计算模型是稳定、可行的。     

具有扩散的Lotka-Volterra系统的持续性

利用最大值原理结合上、下解的方法，讨论了一类具有扩散的竞争－捕食的Lotka-Volterra系统静态解的存在性与持续生存。     

局部对称共形平坦黎曼流形中的极小子流形

对局部对称共形平坦黎曼流形中具有平坦法丛的极小子流形作了一些讨论，得到了极小子流形是全测地的两个充分条件。     

聚酰亚胺薄膜表面粗糙度的影响因素

采用热蒸发气相沉积聚合方法（VDP）制备了聚酰亚胺(PI)薄膜,研究了设备、衬底温度、升温过程和单体配比因素对PI薄膜表面形貌的影响。利用干涉显微镜和扫描电镜对薄膜表面形貌进行了分析;利用原子力显微镜测定了薄膜表面粗糙度。结果表明：设定蒸发源-衬底距离为74 cm时可成连续膜;蒸发源采用一段升温和多段升温时,膜表面均方根粗糙度分别为291.23 nm和61.99 nm;采用细筛网可防止原料的喷溅;均苯四甲酸二酐和4,4′-二氨基二苯醚（PMDA和ODA）单体沉积速率比值为0.9∶1时,膜表面均方根粗糙度值可减小至3.30 nm;沉积衬底温度保持30 ℃左右时,膜表面均方根粗糙度为4.01 nm, 随温度的上升,膜表面质量会逐渐变差。     

聚酰亚胺模塑粉形态结构的 X射线分析

应用广角X射线衍射技术和小角X射线散射技术，对不同热处理温度下的聚酰亚胺模塑粉的形态结构进行了研究。结果表明：随着热处理温度的不同，模塑粉的结晶形态也相应发生变化。其中，热处理温度380℃与室温25℃相比较，模塑粉的相对结晶度增加近一倍；微观粒径尺寸也增加20％以上。     

Poly(methyl methacrylate)/silica nanocomposite fibers by electrospinning

Uniform poly(methyl methacrylate) (PMMA)/silica nanocomposite fibers containing up to 20 wt % silica were prepared by electrospinning. The electrospun solutions were prepared by mixing a solution of PMMA in dimethyl formamide (DMF) with colloidal silica in methyl ethyl ketone (MEK). The average fiber diameter decreases from 2.49 μm to 1.69 μm when 20 wt % silica is incorporated as a result of considerably increased solution conductivity, although the solution viscosity increases significantly, which should result in opposite effect. Thinner fibers (down to 350 nm) can be obtained by changing DMF/MEK proportion and by the addition of an ammonium salt. Nano‐sized silica particles (10–40 nm) distributes homogeneously in the fibers, as revealed by transmission electron microscopy. Furthermore, the incorporation of silica nanoparticles can change the thermal properties and surface wettability of the fiber mats. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1211–1218, 2009     

流量大小对混合流场特性等的影响

 在主、副气流各组份的流量比不变的情况下，改变输入氧碘化学激光器（COIL）光腔总气流流量，数值模拟给出了COIL拉伐尔喷管主、副气流混合状况和各物理量的分布等，通过对这些结果进行对比分析得出：输入COIL光腔总气流流量增加三倍，氧碘气流的混合状况稍稍变差，但Mach数和密度等的分布和变化规律基本不变。     

Nearly monochromatic red electroluminescence from a nonconjugated polymer containing carbazole segments and phenanthroline [Eu(β‐diketonate)3] moieties

A novel nonconjugated copolymer (PVKEu) with carbazole segments and phenanthroline [Eu(β‐diketonate)₃] moieties was synthesized via free radical copolymerization, and characterized by FTIR, ¹H NMR spectroscopy, GPC, ICP, and elemental analysis. The copolymer exhibited good solubility, as well as good thermal stability and high glass transition temperature. The photoluminescence (PL) of this polymer in solution and in solid film has been studied. A multi‐layer device with the configuration of ITO/PEDOT: PSS (40 nm)/PVKEu (70 nm)/BCP (15 nm)/AlQ₃ (30 nm)/LiF/Al exhibited nearly monochromatic red emission at 615 nm and voltage‐independent spectral stability. Our results suggest that enhancing the ligand‐mediated energy transfer between the matrix polymer and europium complex is a potential method to improve the electroluminescence performance of the Eu‐chelated polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 210–221, 2009     

低能量离子束轰击对碳纳米管中杂质的去除

采用低能量离子束对碳纳米管进行轰击。 扫描电子显微镜测试表明,离子束轰击可以方便地去除碳纳米管中的杂质,拉曼光谱结果显示离子束轰击没有对碳纳米管造成明显损伤。 以尿素作为杂质添加到碳纳米管中,经离子束轰击后发现尿素消失,说明离子束对杂质的去除机制为其溅射效应。