A facile retro-ene reaction of 5-(methoxyamino)-3-aryl-1,3,4-oxadiazol-2(3H)-ones

5-(N-Methoxy-N-methyl)amino-3-aryl-1,3,4-oxadiazol-2(3H)-ones 3 undergo a heteroretro-ene reaction in refluxing methanol in which the leaving enophile is formaldehyde. The resulting 5-(methylimino)-3-aryl-1,3,4-oxadiazolidin-2-one 4 may be viewed as a kinetic product which tautomerizes to the more stable 5-(methylamino)-3-aryl-1,3,4-oxadiazol-2(3H)-one 5 as the thermodynamic product. Comparison of calculated reaction energies reveals that the presence of the heterocyclic ring facilitates the retro-ene reaction, but the expulsion of formaldehyde is predicted to be highly exothermic even in its absence.     

The electronic structure of molecules by a many-body approach

The vertical valence ionization potentials of cyclopropane, ethylene oxide and ethylene imine are calculated by a many-body Green's function method. For C₃H₆ the ordering of the ionization potentials is 2e(), 1e(), 2a₁(), 1a₂(), 1e(). The assignment of the 2a₁ and the 1a₂ ionization potentials which has been controversial is thus clarified. The ordering is in agreement with the result obtained via Koopmans' theorem. For ethylene oxide and ethylene imine Koopmans' theorem fails in predicting the correct order of ionic states. For C₂H₄O the ordering of the ionization potentials is 2b ₁(), 4a ₁, 1a ₂(), 2b ₂,3a ₁, 1b ₁(), 1b ₂, 2a ₁ and for C₂H₅N 6a, 5a, 3a, 2a, 4a, 3a, 1a, 2a. The agreement of the computed ionization potentials with the experimental values is very satisfactory.     

Über die Konfiguration des Prolins im Ergotamin

It is well known that in the ergot alkaloids of the peptide type the proline appears in thel-configuration. Different methods of acid hydrolysis may lead to various cleavage products; hydrolysis by HCl yieldsd-proline, on the other hand hydrolytic cleavage by means of strongly acid cation exchange resin preserved the orginall-configuration.

---

---

Teilveröffentlichung der Dissertation vonH. Kolassa, Univ. Wien, 1973.     

Thermische Polymerisation von Acenaphthylen

Zusammenfassung Acenaphthylen wurde durch Anpolymerisation und zweifache Hochvakuumsublimation gereinigt. Die Reinigungsmethode wird ausführlich beschrieben.Bei verschiedenen Temperaturen wurde mit einer dilatometrischen Methode die thermische Bruttogeschwindigkeit gemessen. Zwischen 95 und 105 °C giltk _br=7,0₈·10¹⁰ exp (– 30,9 kcal/RT).Die beträchtliche Aktivierungsenergie der Bruttoreaktion ist sowohl auf eine große Aktivierungsenergie der thermischen Startreaktion als auch auf eine relativ hohe Wachstumsaktivierungsenergie zurückzuführen.Das Polymerisationsverhalten von Acenaphthylen kann vermutlich aufgrund seiner sterischen Eigenschaften erklärt werden.

---

Summary Acenaphthylene was purified by partial polymerisation, followed by double stage high vacuum sublimation. The method of purification is described in detail.The thermal overall rate was measured at different temperatures by a dilatometric method. Between 95 and 105 °C the following relation holds:k _th=7,0₈ · 10¹⁰ exp (– 30,9 kcal/RT).The considerable energy of activation of the overall reaction depends on a relatively high energy of activation of both the thermal initiation and the propagation reaction.It is supposed, that the polymerisation behaviour of acenaphthylene depends mainly on its steric properties.

     

Cathodoluminescence Depth Profiling in SiO2:Ge Layers

 For investigation of the luminescent center profile cathodoluminescence measurements are used under variation of the primary electron energy E ₀ = 2…30 keV. Applying a constant incident power regime (E ₀·I ₀ = const), the depth profiles of luminescent centers are deduced from the range of the electron energy transfer profiles dE/dx. Thermally grown SiO₂ layers of thickness d = 500 nm have been implanted by Ge⁺-ions of energy 350 keV and doses (0.5–5)10¹⁶ ions/cm². Thus Ge profiles with a concentration maximum of (0.4 – 4) at% at the depth of d_m≅240 nm are expected. Afterwards the layers have been partially annealed up to T _a = 1100 °C for one hour in dry nitrogen. After thermal annealing, not only the typical violet luminescence (λ = 400 nm) of the Ge centers is strongly increased but also the luminescent center profiles are shifted from about 250 nm to 170 nm depth towards the surface. This process should be described by Ge diffusion processes, precipitation and finally Ge nanocluster formation. Additionally, a Ge surface layer is piled-up extending to a depth of roughly 25 nm.     

Bond lengthening and through-bond interactions in p,p'-dibenzene and related molecules

The structure of p,p'-dibenzene (PDB) has been investigated by full geometry optimizations using the empirical force field (EFF) and MINDO/3 methods. While other structural parameters are in good agreement, the central bond length calculated by MINDO/3 (1.595 Å), as confirmed by an ab initio (STO-3G basis set) optimization (1.596 Å), is in striking contrast to the corresponding length calculated by EFF (1.543 Å). A detailed analysis of the electronic structure of PDB based on a quantitative perturbational molecular orbital treatment reveals that through-bond coupling of the four π systems is responsible for an elongation of the σ bond which mediates this interaction. Further studies using the EFF and MINDO/3 approaches demonstrate that extended C-C single bonds can arise even in structures with fewer than four π systems. The effect of substituents on the central bond length in PDB has been briefly investigated. (MINDO/3). A variety of other structures have been identified in which bond lengthening may result from through-bond coupling.     

In-situ HEED structure analysis of AlNx films grown by the simultaneous use of a radical beam source and ICB technique

A reactive ionized cluster beam technique (RICB) which was composed of a conventional ICB source and a radical beam source has been used to deposit stable and metastable polycrystalline AlN_x (0≤x≤1) films. Using in-situ high energy electron diffraction (HEED) at grazing incidence geometry, crystallographic properties such as structure, preferred orientation and interplanar dspacing values were determined and the relation to deposition parameters investigated. It could be shown that the simultaneous use of the ICB technique and a radical beam source to separately control the kinetic energy of the Al ions and the dissociation rate of molecular nitrogen, allows AlN films to be deposited with variable composition and crystal structures. In-situ HEED used in the transmission mode is an effective tool to investigate the crystallography of growing compound films such as AlN_x.     

Piperaceae alkaloids: Part IV. Structure and Synthesis of Cyclostachine A,Cyclostachine B and Cyclopiperstachine

Three new alkaloids designated as cyclostachine A (2), cyclostachine B (7) and cyclopiperstachine (10) have been isolated from Piper trichostachyon C. DC. Their structures have been derived on the basis of spectral and degradative studies and confirmed by synthesis. The ¹H- and ¹³C-NMR. spectra of these compounds are discussed.     

Arbeiten über Phosphorsäure- und Thiophosphorsäureester mit einem heterocyclischen Substituenten. 7. Mitteilung. Thio- und Dithiophosphorsäureester von der Art des GS 13005 mit einem analogen oder homologen heterocyclischen Ring

To complete results presented in this and in previous papers of this series as well as published in patents of other authors a review is given on known and new variations of the heterocyclic moiety in GS 13005 type thio- and dithiophosphoric acid esters ( 1, 2 ) by modification of the 1,3,4-thiadiazol-2(3H)-one ring 5 and by its replacement by analogue five- and homologue six-membered rings. Among new esters of this type some containing the pyrazolinone ring 3 or a 2-alkoxy-4H, 6H-1,3,4-thiadiazin-5-one ring 10 (homologue of the original 5-methoxy-1,3,4-thiadiazol-2(3H)-one ring in GS 13005) show no remarkable pesticidal activity, some others containing a pyrazolering 7 or a 3(2H)-pyridazinonc ring 8 are moderately to highly active but toxic to inauinials in the same proportion. Attempts to prepare seven-membered 2-alkoxy- and 2-alkylthio-6,7-dihydro-l, 3,4-thiadiazepin-S(4H)-ones 11 , Z-rnethoxy-l,3,4-thiadiazepin-S(4H)-one 12 (ring vinylogue of the original 5-methoxy-l,3,4-thiadIazol-2(3H)-one ring in GS 13005) and its 7-methyl-derivative have been unsuccessful due to unexpected side reactions, such as: five-ring closure of 3-(3-chloropropionyl)-thio- and -dithiocarbazic acid esters 22 to pyrazolidinone derivatives 23 , pyrazolinone ring closure of a 3-(acetoacety1)-thiocarbazic acid O-methyl ester derivative 26 , bromine attack on sulfur in 3-(2-alkenoyl)-thiocarbazic O-methyl esters 29 instead of bromine addition at the double bond, and halogen splitting off without ring closure in 3-(2,3-dihalogeno-alkanoyl) -thiocarbazic O-methyl esters 30 prepared by acylation of thiocarbazic acid O-methyl ester with dihalogeno-alkanoyl-chlorides.     

Thermodynamische Untersuchungen im System Gold—Cadmium

Zusammenfassung Flüssige und feste Legierungen im System Au–Cd wurden von 60 bis 90 At% Cd zwischen 653° und 873°K mit derEMK-Methode untersucht und thermodynamische Eigenschaften berechnet. Die Aktivitäten von Cd zeigen stark negative Abweichungen vom idealen Verhalten. Die partiellen molaren Enthalpien sind negativ und verschieben sich mit zunehmender Temperatur zu weniger negativen Werten, die partiellen molaren Entropien sind positiv und nehmen mit zunehmender Temperatur zu. Aus eigenen Werten und Literaturdaten wurden integrale thermodynamische Größen für die Schmelzen im gesamten System Au–Cd bei 1000°K berechnet. Für einige feste Cd-reiche Phasen wurden ebenfalls Aktivitäten erhalten und aus den Knickpunkten derEMK-Temperatur-Kurve Temperaturen von Phasenübergängen bestimmt.

---

Thermodynamic investigations in theAu–Cd-system

Liquid and solid alloys in the Au–Cd system were investigated between 60 and 90 at % Cd and 653°–873°K by theemf method, and thermodynamic properties were calculated. The activities of Cd exhibit strong negative deviations from ideal behavior. Partial molar enthalpies are negative and become less so with increasing temperature; partial molar entropies are positive and increase with increasing temperature. A consistent set of integral thermodynamic data for liquid solutions of the entire Au–Cd system at 1000°K were calculated using values taken from the literature. Activities for some solid Cd-rich phases were also obtained. From discontinuities in theemf vs. temperature curve temperatures of phase transitions were determined.

---

---

Mit 5 Abbildungen

---

Herrn Prof. Dr.H. Nowotny gewidmet.