Morphology development and phase inversion during dynamic vulcanisation of EPDM/PP blends

Morphology development and phase inversion were investigated during dynamic vulcanisation of ethylene–propylene–diene terpolymer (EPDM)/polypropylene (PP) blends. The effects of viscosity ratio and cross-linking reactions were also addressed. EPDM/PP blends were dynamically vulcanised in a Haake batch mixer using resole and SnCl₂ as cross-linking agents. The morphology development and cross-linking degree with reaction time were followed by morphology analysis (SEM and TEM) and measurement of EPDM gel content, respectively. For the same reaction time, it was found that the EPDM gel content decreased when the low-molecular-weight EPDM was used. As a result, the morphological development was delayed and the phase-inversion point was shifted to higher reaction times, allowing us to monitor morphological development during a thermoplastic vulcanisate (TPV) preparation. Using the low-molecular-weight EPDM and increasing the PP viscosity accelerated the morphological development, shifting phase-inversion to lower reaction times. While blend composition influenced final TPV morphology, it had a minor effect on the mechanism of morphological development. A correlation between cross-linking degree and morphology development was established. The results obtained allowed to propose a mechanism of morphology development during dynamic vulcanisation of the EPDM/PP blends, including phase inversion.     

Synthesis and properties of phenyl benzoate-based and biphenyl-based liquid crystalline thiol-ene monomers

Novel phenyl benzoate-based and biphenyl-based liquid crystalline thiol-ene monomers were synthesized and their properties investigated. By varying the bridging unit and spacer length, the type of mesophase can be tuned from the low ordered nematic and smectic A phase in the case of the phenyl benzoate-based monomers, to the highly ordered crystal E phase for the biphenyl-based monomers and their corresponding bromo precursors. We investigated the degree of order of the phenyl benzoate-based materials using the Haller method. Possible premature polymerization of these monomers was examined by size exclusion chromatography. The materials exhibit low transition temperatures and a high stability at typical handling times and temperatures. Consequently, these monomers are useful for in situ polymerization with anisotropic inert solvents, which could potentially lead to new architectures and enhanced electro-optical properties of devices. The use of the biphenyl-based monomers appears to be of limited use for polymerizations in anisotropic solution. However, as a result of their intrinsic high degree of molecular order, these monomers form a particularly interesting class of reactive materials that can be bulk polymerized to give main chain polymers with highly defined mechanical and optical or electro-optical properties.     

Synthesis of oligosaccharides catalyzed by thermostable β-glucosidase fromPyrococcus furiosus

Focusing on CO₂ fixation, photoautotrophic cultivation of the red algaPorphyridium cruentum was investigated by means of a batch culture under a 5% CO₂-enriched atmosphere. The algal growth kinetics was successfully described with a logistic model, and simulation of a continuous culture under the optimum growth conditions (30°C, 12 klux and 1.18 g-cells/L) showed that the algal CO₂-fixation activity could reach 0.66 g-CO₂/(L X d). Under the same growth conditions, eicosapentaenoic acid (20:5 n-3, EPA) and arachidonic acid (20:4 n-6, ARA) yields were similarly calculated to be 3.6 mg-EPA/(L X d) and 6.5 mg-ARA/(L X d), respectively.     

Bank of reference samples of blank urine from livestock

From three species of livestock, bovine, ovine and porcine, samples of urine from each 10–20 different animals were collected. The animals originated from a governmental experimental farm and differed in race, age, sex and were fed with different types of feed. Fifty different samples of urine were lyophilised in units of 5 mL in sealed amber glass bottles. After lyophilisation of the samples, several quality control tests were performed. The variation in net weight of the units of urine and the lyophilisates ranged from 0.01%–1.7% and 0.1%–10%, respectively. Most values did not exceed 0.1% for urines and 1% for lyophilisates. The residual water content of the lyophilisates was determined by the Karl-Fisher titration method. The average percentage of residual water ranged from 1.0%–7.0% for bovine, from 1.3%–3.0% for porcine and from 1.6%–5.5% for ovine urine lyophilisates. Further, all different samples were analysed for the presence of anabolic compounds with a multi-residue procedure developed at the CRL. In two samples of bovine urine the presence of α-boldenone was detected and confirmed. In most porcine urines the endogenous steroids α-testosterone and α-estradiol were detected. In a number of porcine and ovine urine samples α- and β-zearalenol were detected. The origin of these compounds is the f2-toxin produced by a Fusarium fungus. In ovine samples α-testosterone and α-estradiol were detected.     

Fast Capillary Gas Chromatography: Comparison of Different Approaches

Savings in analysis time in capillary GC have always been an important issue for chromatographers since the introduction of capillary columns by Golay in 1958. In laboratories where gas chromatographic techniques are routinely applied as an analytical technique, every reduction of analysis time, without significant loss of resolution, can be translated into a higher sample throughput and hence reduce the laboratory operating costs. In this contribution, three different approaches for obtaining fast GC separations are investigated. First, a narrow-bore column is used under conventional GC operating conditions. Secondly, the same narrow-bore column is used under typical fast GC conditions. Here, a high oven temperature programming rate is used. The third approach uses a recent new development in GC instrumentation: Flash-2D-GC. Here the column is placed inside a metal tube, which is resistively heated. With this system, a temperature programming rate of 100°/s is possible. The results obtained with each of these three approaches are compared with results obtained on a column with conventional dimensions. This comparison takes retention times as well as plate numbers and resolution into consideration.     

ON THE MECHANISM OF “HYDROPHOBIC” INTERACTIONS

It is shown that the interfacial attraction between low-energy bodies immersed in aqueous media, known as “hydrophobic” interaction, can be quantitatively accounted for by, mainly, the hydrogen-bonding energy of cohesion of water, plus, to a very minor extent, a van der Waals-Lifshitz attraction between the Immersed law-energy bodies.