g tensor of transition ions in a crystalline matrix: Interstitial V(IV) and Ti(III) in rutile TiO2

In order to check if the parametrized crystal field approach is efficient in the analysis of an EPR powder spectrum we study defects of known geometry as if we did not know it. The g tensor of an interstitial V⁴⁺ ion in a single crystal of rutile TiO₂ can be interpreted without ambiguity, and the optimized parameters compare well with their theoretical values. For an interstitial Ti³⁺ ion, two solutions are found: both of them correspond to interstitial positions, but they differ in the principal axis orientation.     

On the loss of cadmium, antimony and silver during dry ashing of biological material

Summary The loss of cadmium, antimony and silver during dry ashing of marine weeds, mussels and shrimps was studied with the aid of radioactive tracers. Except for antimony all biological material was labelled by uptake of the radioactive tracers by the organisms while still alive. At an ashing temperature of 500° C and below no significant loss by volatilization of these elements occurs. The results obtained at higher temperatures with cadmium show that the behaviour of this element may depend on the composition of the organic material. Retention on the wall of quartz crucibles did not cause serious losses.

---

Über den Verlust an Cadmium, Antimon und Silber bei der Trockenveraschung von biologischem Material

Zusammenfassung Mit Hilfe radioaktiver Tracer wurden die Verluste an Cadmium, Antimon und Silber bei der Trockenveraschung von Seetang, Muscheln und Krabben untersucht. Mit Ausnahme von Antimon wurden alle Materialien mit den Tracern durch Aufnahme im lebenden Zustand markiert. Bei Veraschungstemperaturen von 500° C und darunter konnten keine signifikanten Verluste durch Verflüchtigung der Elemente festgestellt werden. Das Verhalten von Cadmium bei höheren Temperaturen kann von der Zusammensetzung des organischen Materials abhängen. Verluste durch Haften an der Wand des Quarztiegels waren unbedeutend.

     

Solvates of Indomethacin

Indomethacin is known to exhibit polymorphism and solvates, the different forms obtained do not exhibit the same solubility and their bioavailabilities are different. It is of a prime importance to identify the various polymorphic and solvated forms. This study was carried out by: DSC (different scanning calorimetry), TG (thermogravimetric analysis), X-ray diffraction and thermomicroscopy. Seven solvates, with acetone, benzene, dichloromethane, tetrahydrofurane, propanol, chloroform and diethylether, were isolated and studied. Their formulae have been determined by thermogravimetric analysis and their X-ray patterns on powder are presented, by DSC their behaviour after desolvation is recorded, the temperature and the enthalpy of fusion are measured and by this way the form obtained is deduced. This revised version was published online in July 2006 with corrections to the Cover Date.     

Determination of antibiotics such as macrolides,ionophores and tiamulin in liquid manure by HPLC–MS/MS

A method for the analysis of several macrolide and ionophore antibiotics as well as tiamulin in liquid manure was developed. Reversed-phase liquid chromatography and atmospheric pressure chemical ionisation (APCI) tandem mass spectrometry was used for detection.High-performance liquid chromatographic (HPLC) separation of the antibiotics was achieved in 35 min. The analytes were extracted with ethyl acetate and the extracts were cleaned up by solid-phase extraction on a diol SPE cartridge. Recovery experiments with spiked liquid manure concentrations varying from 6 to 2,000 microg kg(-1) gave constant recovery rates. The recovery rates for the macrolides erythromycin, roxithromycin and oleandomycin were 75-94%, that for the ionophore salinomycin was 119%, while that for the pleuromutilin tiamulin was 123%, when using a macrolide internal standard. The relative standard deviation was found to be 15-36% and the limits of detection were 0.4-11.0 micro g kg(-1).The maximum concentrations found in manure samples were 43 micro g kg(-1) for tiamulin and 11 micro g kg(-1) for salinomycin.     

Spreading of viscous droplets on a non viscous liquid

Some polymer melts (of high viscosity ) can wet completely the surface of a non miscible, simple liquid. We discuss here the laws of spreading for a macroscopic droplet of this type, when the internal friction of the droplet dominates. We predict a droplet radius increasing liket ^1/4 wheret is the spreading time, or equivalently a droplet curvature decreasing liket ^–1. The droplet should be surrounded by a precursor film, which is not discussed in the present note.     

Novel bromotyrosine derivatives that inhibit growth of the fish pathogenic bacterium Aeromonas hydrophila, from a marine sponge Hexadella sp

Three new bromotyrosine derivatives, 11-N-methylmoloka'iamine (1), 11-N-cyano-11-N-methylmoloka'iamine (2), and kuchinoenamine (3), were isolated as antibacterial constituents from a marine sponge Hexadella sp. Their structures were elucidated on the basis of spectral and chemical methods. They exhibited moderate antibacterial activity against the fish pathogenic bacterium Aeromonas hydrophila.     

Group separation of organohalogenated compounds by means of comprehensive two-dimensional gas chromatography

Separations of 12 compound classes, polychlorinated biphenyls (PCBs), diphenyl ethers (PCDEs), naphthalenes (PCNs), dibenzothiophenes (PCDTs), dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), terphenyls (PCTs) and alkanes (PCAs), toxaphene, organohalogenated pesticides (OCPs), and polybrominated biphenyls (PBBs) and diphenyl ethers (PBDEs) by comprehensive two-dimensional gas chromatography were evaluated. Five column combinations, DB-1 x 007-210, DB-1 x HT-8, DB-1 x LC-50, DB-1 x 007-65HT and DB-1 x VF-23ms were used to study, primarily, group-type separations, but attention was devoted also to within-class separation, especially for those classes which were not addressed in much detail before, the PCNs, OCPs, PBBs and PCTs. The DB-1 x 007-210 column set did not offer any extra separation compared to one-dimensional GC. For the DB-1 x HT-8 column combination, the useful principle of congener separation on the basis of number of halogen substituents in a molecule was confirmed (PCBs, toxaphene) and extended (PCTs, PBDEs). No practically useful group-type separation was observed for this column combination. The DB-1 x LC-50 set provides group separation based on planarity: planar compounds such as PCDDs, PCDFs, PCDTs and PCNs are much more retained than, and therefore separated from, non-planar analytes. Within the classes of PCBs, PBBs and PCTs highly useful separation of planar from non-planar compounds was also observed. The DB-1 x 007-65HT column set effectively separates PCAs and PBDEs from all other compound classes, and provides a good separation of brominated and chlorinated analogue classes from each other. This column set was the most efficient one for within-class separation of OCPs and PCNs. Finally, DB-1 x VF-23ms yields excellent within-class separations, especially of non-aromatic compounds, viz. OCPs, toxaphene and PCAs. No group separation was observed here. The applicability of the approach was demonstrated for a sediment extract and a dust extract. In the sediment extract, PCDDs, PCDFs, PCAs and PCNs were identified and their efficient separation was achieved. In the dust sample, separation of PCAs and PBDEs was achieved and several new PBDE congeners were identified.     

Development of a screening method for cocaine and cocaine metabolites in urine using solvent microextraction in conjunction with gas chromatography

A simple, quick and inexpensive screening method for cocaine and cocaine metabolites has been developed. Drug extraction was achieved using the relatively new technique of solvent microextraction (SME). Complete analysis is achieved in 13 min, using, a 6-min extraction with a 2-microl drop followed by separation on a gas chromatograph. The developed procedure was tested as a screening method for cocaine and cocaine metabolites in spiked urine samples. Using SME, concentrations as low as 0.125 microg ml(-1) of cocaine, ecgonine methyl ester, cocaethylene and anhydroecgonine methyl ester were measurable with relative standard deviation values averaging 9.0%.     

Antimony(III) Oxide Film on a Cellulose Fiber Surface: Preparation and Characterization of the Composite

Cellulose/antimony(III) oxide composites, Cel/Sb(2)O(3), with oxide loadings of 1.7, 5.4, and 9.2 wt% were prepared by reacting the precursor SbCl(3) reagent with cellulose in dry ethanol solution. The reaction of the Lewis acid and the cellulose fibers occurred at the~amorphous domains of the biopolymer, increasing the crystallinity degree of the composite compared with that of the untreated cellulose. The scanning electron microscopy images and metal mapping for all samples showed that the oxide film layer uniformly covered the fiber surfaces with no detectable agglomerates of the oxide particles. The synchrotron X-ray diffraction patterns indicated that the antimony oxide film was obtained as a crystalline phase with orthorombic structure. The atomic ratios of O/Sb, determined by X-ray photoelectron spectroscopy, indicated that, for Cel/Sb(2)O(3) samples with 9.3 wt% loading, the fiber surface is nearly saturated by the oxide layer. The thermal stability of Cel/Sb(2)O(3) compared to that of untreated cellulose is practically unaffected. Copyright 2000 Academic Press.     

Glow discharge mass spectrometry

Over the past twenty years or so, glow discharge mass spectrometry (GDMS) has become the industry standard for the analysis of trace elements in metals and semiconductors. A review of its history is followed by a picture of the present situation and a look to where the future may lie. Applications are summarised, including the ability of GDMS to offer depth-resolved data and non-conductor analysis, and the well-documented quantitative nature of the results is reviewed. The effects resulting from the physical properties of the analyte material are discussed at length. Finally, recent work such as fast flow sources and pulsed glow discharges is reviewed.