Alloying by high dose ion implantation of iron into magnesium and aluminium

Alloys of the systems Fe–Al (mixable over the whole concentration range) and Fe–Mg (insoluble with each other) were produced by implantation of Fe ions into Al and Mg, respectively. The implantation energy was 200 keV and the ion doses ranged from 1 × 10₁₄ to 9 × 10₁₇cm^-2The obtained implantation profiles were determined by Auger electron spectroscopy depth profiling. Maximum iron concentrations reached were up to 60 at.% for implantation into Al and 94 at.% for implantation into Mg. Phase analysis of the implanted layers was performed by conversion electron Mössbauer spectroscopy and X‐ray diffraction. For implantation into Mg, two different kinds of Mössbauer spectra were obtained: at low doses paramagnetic doublets indicating at least two different iron sites and at high doses a dominant ferromagnetic six‐line‐pattern with a small paramagnetic fraction. The X‐ray diffraction pattern concluded that in the latter case a dilated αiron lattice is formed. For implantation into Al, the Mössbauer spectra were doublet structures very similar to those obtained at amorphous Fe–Al alloys produced by rapid quenching methods. They also indicated at least two different main iron environments. For the highest implanted sample a ferromagnetic six‐line‐pattern with magnetic field values close to those of Fe₃Al appeared.     

Logarithmic temperature dependence of the conductivity of the two-dimensional metal

We report on the first observation and studies of a weak delocalizing logarithmic temperature dependence of the conductivity, which causes the conductivity of the 2D metal to increase as T decreases down to 16 mK. The prefactor of the logarithmic dependence is found to decrease gradually with density, to vanish at a critical density n _c , 2∼2×10¹² cm⁻², and then to have the opposite sign at n>n _c ,2. The second critical density sets the upper limit on the existence region of the 2D metal, whereas the conductivity at the critical point, G _c ,2∼120e ²/h, sets an upper (low-temperature) limit on its conductivity. Pis’ma Zh. éksp. Teor. Fiz. 68, No. 6, 497–501 (25 September 1998) Published in English in the original Russian journal. Edited by Steve Torstveit.     

Evolved gas analysis (EGA) of brick clays

Using a system based on non-dispersive infrared (NDIR) detectors, evolved gas analysis (EGA) was able to identify and quantify the principal volatiles produced by heating powdered samples of UK brick clays. From these results, atmospheric emissions likely to result from brick production can be predicted. In addition, EGA results for extruded brick clay test pieces are significantly different from those of powdered samples. Within an extruded brick clay body, evolved gases are contained within a pore system and evolved gas-solid phase reactions also occur. This EGA study provides further evidence on the nature of firing reactions within brick clay bodies. The qualitative and quantitative influence of heating rate — a key process condition in brick manufacture — on gas release is also outlined.Dedicated to Dr. Robert Mackenzie on the occasion of his 75th birthday     

Spectrophotometric analysis, thermal analysis and gravimetric determination of some metal ions with oxime and Schiff's base derivatives of N-furoylphenylhydroxylamine

The oxime and Schiff's base of N-furoylphenylhydroxylamine form complexes with Co²⁺, Cu²⁺, Zn²⁺ and Fe³⁺. These complexes were studied by means of the UV — Vis. spectra of nujol mulls, electron spin resonance (ESR) spectra and magnetic susceptibility to determine their stereochemistry. The complexes were characterized via elemental analyses, molar conductivities and thermogravimetric analyses. Organic reagents were used for the gravimetric determination of Co²⁺, Cu²⁺ and Fe³⁺ through the precipitation of their complexes. The compounds were also used for separation of a binary mixture of Cu²⁺ and Cu²⁺. Interferences were studied.     

Investigation of the chemical state of copper in Cu/SiO2 composite films by x-ray photoelectron spectroscopy

The concentration and chemical state of copper in the subsurface region of Cu/SiO₂ composite films obtained by simultaneous magnetron sputtering from two sources (Cu and SiO₂) are determined by x-ray photoelectron spectroscopy (XPS). It is established that copper in the as-grown film is primarily in the form of unoxidized atoms dispersed in a SiO₂ matrix. Annealing of the film results in practically no oxidation, but about 70% of the copper atoms condense into metallic clusters with sizes below 10 Å in the subsurface region and about 50 Å in the bulk of the film. The changes in the binding energy of core electrons, and especially in the energies of Auger electrons, are so large in this situation that photoelectron and Auger spectroscopy are efficient methods for monitoring the chemical state of this composite material.