Development of a novel approach for the production of dried genomic DNA for use as standards for qualitative PCR testing of food-borne pathogens

As part of a multi-centre European project, FOOD-PCR, the feasibility of a novel approach for production of dried bacterial DNA that could be used as certified reference materials (CRM) was assessed. Selected strains of Salmonella typhimurium, Listeria monocytogenes, Escherichia coli O157, Campylobacter jejuni and Yersinia enterocolitica were used to produce genomic DNA (gDNA). These preparations gave support to method development for qualitative polymerase chain reaction (PCR) detection methods for food-borne pathogens. Purified gDNA was transformed into stable and dry gDNA by using polypropylene vials as carrier and applying a vacuum-drying technique. The gDNA preparations were shown to be sufficiently stable under ambient transport conditions without cooling and proved to have long-term stability at 5°C of at least 22 months. The dried DNA was easily reconstituted by addition of distilled water then gentle shaking. These studies have shown that production of stable and dry bacterial gDNA material is feasible and could help satisfy the increasing need for certified reference DNA positive control samples in the field of PCR testing for detection and verification of food-borne microbial pathogens.

     

Comparative energies of Zn(II) cation localization as a function of the distance between two forming cation position aluminium ions in high-silica zeolites

Periodical calculations of Zn(II) metal cation stabilization in cationic positions with distantly placed aluminium ions has been performed for high-silica ferrierite. It was found that decrease of the stabilization energy at large distances between Al ions (more than 10 Å) is about of 2 eV in comparison with nearest possible position of two Al ions in the zeolite lattice and weekly depended on following increase of the Al-Al distance. Main changes in stabilization energy occured within a 3-Å interval of these distances. Only for the localizations of both Al ions in one zeolite ring zinc cationic form is more stable than hydrogen form.     

Nanostructured Ion-Selective MCM-48 Membranes

Templated MCM-48 silica was prepared using CTAB as surfactant. The MCM-48 powders and thin films were characterized by different techniques. MCM-48 layers were deposited on macroporous α-alumina supports and silicon nitride microsieves. The water permeability of MCM-48 was compared with the permeability of conventional mesoporous γ-alumina membranes. The applicability of MCM-48 as ion-selective electric field-driven switchable interconnect for microfluidic devices was demonstrated.     

利用声波控制超短脉冲的色散

 声光互作用器件声光可编程色散滤波器（AOPDF）是一种实时的色散补偿器件，它可用于飞秒啁啾脉冲放大系统。通过耦合模理论推导，得到了输出脉冲的群延迟与调制声波的频率、啁啾、带宽等参数的关系，并且对用2.5cm长的LiNbO₃作为声光晶体的AOPDF补偿飞秒光脉冲的色散进行了数值模拟，得到了对中心波长为800 mm的钛宝石飞秒激光色散补偿特性及所需声波的频率和啁啾参数。     

制作高密度衍射光栅的光电式刻划控制的研究

高精度的光电式刻划控制系统是制作高密度母光栅的关键技术,以光栅干涉仪为控制核心,设计了光电式的光栅刻划控制系统,并对可能产生的加工误差进行了初步的分析;采用该控制系统的光栅刻划实践表明,所设计的光电式刻划控制系统已完全达到了高密度衍射光栅的亚微米栅距分度要求。     

非均匀网格时域伪谱算法在超宽带技术中的应用

 与传统时域有限差分算法相比，采用以伪谱方法离散Maxwell微分方程为基础的时域伪谱(PSTD)算法计算大的电尺度电磁场时域问题，将大大提高计算效率，降低内存需求。为了拓宽PSTD算法的应用，近年来，基于网格插值方法的非均匀时域伪谱算法得到了发展。研究的重点是算法中非均匀网格技术的实现及其在时域瞬态脉冲电磁场模拟和高功率超宽带脉冲技术方面的应用。以高斯脉冲为激励源，用该算法计算了多层介质的反射和透射，并通过超宽带脉冲穿墙实验对这一方法的应用进行了验证。模拟和实验结果具有较好的一致性。     

耦合非线性Schrdinger系统的多辛差分格式

近年来,Bridges等人在Hamiltonian力学意义下,直接把有限维Hamiltonian系统推广到无穷维,通过引入新的函数坐标,使得偏微分方程在时间和空间的各个方向上都有各自不同的有限维辛结构,这样原偏微分方程就由各个有限维辛结构以及右端的梯度函数决定,称这样的方程为多辛Hamiltonian系统.多辛Hamiltonian系统满足多辛守恒定律,满足多辛Hamiltonian系统的多辛守恒律的离散算法称为多辛算法.以耦合非线性Schr dinger方程为例,研究无穷维Hamiltonian系统的多辛算法,验证了两孤立子碰撞后会发生相互通过、反射及融合现象.     

利用普通视频CCD作为紫外激光和软X射线探测器的研究

 介绍了利用价格便宜的普通视频CCD来获取紫外激光和软X射线图像的方法和应用结果，以代替价格昂贵的紫外CCD、使用不方便的X光胶片或者昂贵的X光CCD，其关键点是：（1）去除CCD相机的自动增益校正；（2）将相机的校正系数γ值设置为1；（3）去除CCD相机前面的保护窗。作为一种简易的装置，可以用于紫外激光测量及激光与等离子体相互作用研究。结果表明，采用改造后的普通视频CCD测量紫外激光光斑，准确可靠，其灵敏度比科学级紫外CCD的低一个量级，它还可以测量软X射线的二维分布，作为X光针孔相机使用非常方便。     

闪烁光纤在γ射线辐照下部分特性的蒙特卡罗模拟

 闪烁光纤在射线成像方面的应用越来越广泛。为了进一步了解闪烁光纤在射线辐照下的基本特性，基于蒙特卡罗方法，利用计算机模拟分析了γ射线在闪烁光纤中的好事例率与光纤长度及射线能量的关系，能量沉积效率与光纤长度及射线能量的关系。此项工作对于闪烁光纤阵列在射线成像，剂量场测量等方面的研究很有价值。     

超短脉冲超强激光与固体靶相互作用中高能离子的产生

 用2D3V PIC粒子模拟方法得到了超短脉冲超强激光与固体靶相互作用中高能离子产生的图像，并对其机理进行了研究。在靶前后表面都观察到了高能离子的产生，并诊断了离子能谱。模拟结果表明，在靶前表面所产生的高能离子，角分布较大，在向靶内输运过程中会损失能量；在靶后表面产生的高能离子，定向性很好，能获得很高的能量。模拟得到的离子能量和实验观测结果在量级上相符。