Gold ultra-microelectrode arrays: application to the steady-state voltammetry of hydroxide ion in aqueous solution.

Gold ultra-microelectrode arrays are used to explore the electrochemical oxidation of hydroxide ions and are shown to be analytical useful. Two types of ultra-microelectrode arrays are used; the first consist of 256 individual electrodes of 5 microm in radius, 170 of which are electrochemically active in a cubic arrangement which are separated from their nearest neighbour by a distance of 100 microm. The second array compromises 2597 electrodes of 2.5 microm in radius and of which 1550 of which are electrochemically active in a hexagonal arrangement separated by the nearest neighbour by 55 microm. Well defined voltammetric waves are found with peak currents proportional to the concentration of hydroxide ions in the range 50 microM to 1 mM. Detection limits of 20 microM using the 170 ultra-microelectrode and 10 microM with the 1550 ultra-microelectrode array are shown to be possible but with a higher sensitivity of 4 mA M(-1) observed using the 1550 ultra-microelectrode array compared to 1.2 mA M(-1) with the 170 ultra-microelectrode array.     

New extraction method for the analysis of linear alkylbenzene sulfonates in marine organisms. Pressurized liquid extraction versus Soxhlet extraction

A new method has been developed for the determination of linear alkylbenzene sulfonates (LAS) from various marine organisms, and compared with Soxhlet extraction. The technique applied includes the use of pressurized liquid extraction (PLE) for the extraction stage, preconcentration of the samples, purification by solid-phase extraction (SPE) and analysis by liquid chromatography with fluorescence detection. The spiked concentrations were added to the samples (wet mass of the organisms: Solea senegalensis and Ruditapes semidecussatus), which were homogenized and agitated continuously for 25 h. The samples were extracted by pressurized hot solvent extraction using two different extraction temperatures (100 and 150 degrees C) and by traditional Soxhlet extraction. The best recoveries were obtained employing pressurized hot solvent extraction at 100 degrees C and varied in the range from 66.1 to 101.3% with a standard deviation of between 2 and 13. Detection limit was between 5 and 15 microg kg(-1) wet mass using HPLC-fluorescence detection. The analytical method developed in this paper has been applied for LAS determination in samples from a Flow-through exposure system with the objective of measuring the bioconcentration of this surfactant.     

Defect concentration in Ti-substituted YIG from TG curves

The article discusses theory and experiment about the measurement of defect concentration in Ti-substituted yttrium iron garnet by means of thermogravimetry techniques. The two possible cases arising from oxygen interchange with atmosphere, oxygen vacancies and interstitial cations, may be analyzed quantitatively from the derived expressions. The possibility of another type of defects being present in the samples, not associated to oxygen evolution, is not excluded. Measurements were carried out in air and CO₂ for different Ti contents. The substitution tends to increase slightly the defect parameter θ in YIG, while a CO₂ reducing atmosphere is much more effective than the Ti substitution for increasing θ. Calculations for a given single-phased sample sintered in air show two possibilities: a deficit of one oxygen atom for every 2.5 unit cells of 96 atoms, or one excess cation for every 3.5 cells. Other samples show very similar results. The accuracy involved in the measurements is about 2–3%.     

Bis(μ‐acetato‐κ3O,O′:O′)bis[bis(acetato‐κ2O,O′)diaquadysprosium(III)] tetrahydrate

The title compound, [Dy₂(C₂H₃O₂)₆(H₂O)₄]·4H₂O, crystallizes in the form of dimeric units related by an inversion centre. Each cation is nine‐coordinate, binding to two water mol­ecules and three acetate groups, two of which are bidentate and the third tridentate. This last acetate group acts as a bridge between neighbouring metal atoms, leading to an intradimer Dy?Dy separation of 4.170 (1) Å.     

Micellar solutions of sulfobetaine surfactants in water-ethylene glycol mixtures: surface tension, fluorescence, spectroscopic, conductometric, and kinetic studies

Micellization in water-ethylene glycol (EG) N-dodecyl, N-tetradecyl, and N-hexadecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (SB3-12, SB3-14, and SB3-16, respectively) micellar solutions, with the weight percent of EG changing within the range 0-40, was studied by means of surface tension measurements. Information about the influence of the added EG on the aggregation number of the sulfobetaine micelles and on the polarity of the interfacial region of micelles was obtained through fluorescence and spectroscopic measurements. Surface tension measurements also provide information about the dependence of the surface excess concentration, the minimum area per surfactant molecule, the surface pressure at the cmc, and the standard Gibbs energy of adsorption on the added weight percent of the organic solvent. The Gordon parameter of the water-EG mixtures was also estimated by means of surface tension measurements. The thermodynamic and structural changes originated by the presence of EG control the micellar kinetic effects observed in the reaction methyl 4-nitrobenzenesulfonate + Br(-) occurring in the water-EG sulfobetaine micellar solutions. Information about the distribution of bromide ions between the bulk and micellar pseudophases was obtained through conductivity measurements. The kinetic micellar effects were quantitatively explained by using the pseudophase kinetic model.     

Simultaneous determination of N-butylscopolamine and oxazepam in pharmaceutical formulations by first-order digital derivative spectrophotometry

A simple method has been developed for the simultaneous determination of N-butylscopolamine bromide and oxazepam in pharmaceutical formulations using first-order digital derivative spectrophotometry. Acetonitrile was selected as the solvent in which both compounds showed well-defined bands. Both analytes showed good stability in this solvent when solutions of the analytes were exposed to light and temperatures between 20 degrees and 80 degrees C. The simultaneous determination of both drugs was performed by the zero-crossing method at 226.0 and 257.0 nm for N-butylscopolamine and oxazepam, respectively. The linear range of determination was found to be 2.5 x 10(-7) to 8.0 x 10(-5) mol/L for N-butylscopolamine and 7.1 x 10(-8) to 8.0 x 10(-5) mol/L for oxazepam. A very good level of repeatability (relative standard deviation) of 0.2% was observed for N-butylscopolamine and oxazepam. The ingredients commonly found in pharmaceutical formulations do not interfere. The proposed method was applied to the determination of these drugs in pharmaceutical formulations (capsules).     

SOLVENT EFFECTS ON THE TAUTOMERIZATION OF 5′-DEOXYPYRIDOXAL. A PHOTOPHYSICAL STUDY

Abstract— Absorption and fluorescence spectra of 5′-deoxypyridoxal (DPL) in various pure solvents and mixtures were recorded both at room temperature and over the range10–65°C. The areas under the absorption bands were analyzed to obtain the mole fraction (f_N, f_z) of two tautomers (the zwitterionic, Z, and neutral, N, forms) in the ground state. The following spectral parameters were determined from the fluorescence spectra: Stokes shift (Δv), fluorescence quantum yield of the neutral form (Q_N), fluorescence ratio of the neutral to the zwitterionic form (ø_N/ø_Z) and the rate constant of tautomerization (k₁) from Z to N in the excited state. Some of these parameters (f_N, Δv, Q_N, k₁) were found to depend on the proton donor character of the solvent, whereas others (ø_N/ø_Z) depended on its dipole moment. Thus, the absorption and fluorescence spectra of DPL allow one to obtain information on the polarity and the concentration of –OH groups on its environment.     

Vibronic intensities in centrosymmetric coordination compounds of the rare earths Part II. A vibronic crystal field-closure-ligand polarisation model and applications to the PrCl6 and UBr6 complex ions in octahedral symmetry

A symmetry adapted formalism to evaluate the vibronic intensities induced by the ungerade vibrational modes in centrosymmetric coordination compounds of the rare earths is put forward and applied to several selected electronic transitions of the PrCl³⁻₆ and UCl²⁻₆ complex ions in octahedral symmetry. This current model is based upon a modified symmetry adapted version of the combined vibronic crystal field-closure-ligand polarisation approach. This model differs from that developed in Part I of this series, in that for the vibronic crystal field contribution to the total transition dipole moment, the closure procedure is employed rather than the utilisation of a truncated basis set for the central metal intermediate electronic states. A criterion is introduced to choose an appropriate set of phases for both the electronic and the vibrational coordinates so that to ensure the right sign for the interference term (which couples together both the vibronic crystal field and the vibronic ligand polarisation contributions to the total transition dipole moment). We have focused our attention on the modulation of the intermolecular force field and a version of a modified general valence force field has been adopted. The reasons for using this formalism rather than the superposition model (SM) are fully discussed in the text. Finally, it is shown that the agreement with experiment is satisfactory for most of the components of the transitions studied, despite the apparent simplicity of our model calculation. General master equations applicable to any f^N electronic configurations are derived to show the utility and flexibility of this current formalism.     

Interfacial properties of self-organized TiO<Subscript>2</Subscript> nanotubes studied by impedance spectroscopy

The semiconductor properties of the interface TiO₂/electrolyte in high organized porous oxide structures were analyzed by means of impedance spectroscopy near the flat band potential. The impedance and capacitance studies performed on the as-anodized and thermally treated samples (anatase) indicate the presence of a duplex structure formed by (1) the oxide at the bottom of the pores and (2) the walls of pores with different donor densities and surface state concentrations.     

Physico-chemical characterization of liposomes with covalently attached hepatitis A VP3(101-121) synthetic peptide.

The covalent conjugation of a 20-mer peptide belonging to the VP3 capsid protein of hepatitis A virus to the surface of preformed liposomes was investigated. Three different bonds (disulfide, thioether and amide) were established between the peptide sequence and liposomes bearing at their surface appropriate reactive groups. The effect of the relative concentration of the N-[4-(p-maleimidophenyl)butyryl]dipalmitoylphosphatidylethanolamine anchor in liposomes on stability during coupling of the peptide sequence was studied. The interaction of the three liposomal preparations with phospholipids in a biomembrane model system, monolayers at the air-water interface, is also reported. The results showed that although the peptides associate with liposomes in similar yields for the three strategies studied, differences can be observed when their interaction with phospholipid monolayers composed of dipalmitoylphosphatidylcholine is analysed.