Evaluation of different quantitative approaches for the determination of noneasily ionizable molecules by different atmospheric pressure interfaces used in liquid chromatography tandem mass spectrometry: Abamectin as case of study

The liquid chromatography tandem mass spectroscopy residue determination of compounds without any acidic or basic centers such as abamectin has been investigated. Several approaches regarding the interface used and adduct formation have been compared. The low acidity of the hydroxyl groups only made deprotonation feasible using the atmospheric pressure chemical ionization (APCI) interface. To obtain sufficient sensitivity for residue analysis, the Ion Sabre APCI interface was necessary. However, the sensitivity attained was lower than for monitoring adducts in positive ion mode. Using electrospray ionization, different adducts with Na+, NH4+, and Li+ were tested and compared. The best results were obtained for the ammoniated adduct in electrospray ionization (ESI) because of its high sensitivity and the presence of several product ions with similar abundance. The highest sensitivity was reached using an in-source fragment as precursor ion, leading to a limit of detection (LOD) of 2 microg/L with low relative standard deviation. The relatively high abundance of other transitions allowed abamectin confirmation at concentrations close to the LOD (6 microg/L). Alkali ions were found to be a suitable alternative to determine and confirm abamectin at residue levels. The [M + Na]+ also presented various product ions with similar abundance, which allowed confirmation at LOD levels. However, this LOD was found to be almost four times higher than with [M + NH4]+ because of the poor sensitivity of the transitions obtained. Although the use of Li+ facilitated the fragmentation of the adduct [M + Li]+, with similar sensitivity to [M + NH4]+, this fragmentation preferentially generated only one product ion, which did not allow confirmation at concentration levels lower than 15 microg/L. The use of APCI for monitoring adducts was also feasible, but with less sensitivity. The sensitivity increased with the Ion Sabre APCI, although it was still five times lower than with ESI. Other adduct formers such as Co2+ and Ni2+ also were tested with unsatisfactory results.     

Carboxylate anions binding and sensing by a novel tetraazamacrocycle containing ferrocene as receptor

A tetraazamacrocycle containing ferrocene moieties has been synthesized and characterized. The tetraprotonated form of this compound was evaluated as a receptor (R) for anion recognition of several substrates (S), Cl(-), PF(6)(-), HSO(4)(-), H(2)PO(4)(-) and carboxylates, such as p-nitrobenzoate (p-nbz(-)), phthalate (ph(2-)), isophthalate (iph(2-)) and dipicolinate (dipic(2-)). (1)H NMR titrations in CD(3)OD indicated that this receptor is not suitable for recognizing HSO(4)(-) and H(2)PO(4)(-), but weakly binds p-nbz(-), and strongly interacts with ph(2-), dipic(2-), and iph(2-) anions forming 1 : 2 assembled species. The largest beta(2) binding constant was determined for ph(2-), followed by dipic(2-) and finally iph(2-). The effect of the anionic substrates on the electron-transfer process of the ferrocene units of R was evaluated using cyclic voltammetry (CV) and square wave voltammetry (SWV) in methanol solution and 0.1 mol dm(-3)(CH(3))(4)NCl as the supporting electrolyte. Titrations of the receptor were undertaken by addition of anion solutions in their tetrabutylammonium or tetramethylammonium forms. The protonated ligand exhibits a reversible voltammogram, which shifts cathodically in the presence of the substrates. The data revealed kinetic constraints in the formation of the receptor/substrate entity for dipic(2-), ph(2-) and iph(2-) anions, but not for p-nbz(-). In spite of the slow kinetics of assembled species formation with the ph(2-) substrate, this anion provides the largest redox-response when the supramolecular entity is formed, followed by dipic(2-), iph(2-) and finally p-nbz(-) anions. This trend is in agreement with the (1)H NMR results and the values of the binding constants. Single crystal X-ray structures of the receptor with PF(6)(-), ph(2-), iph(2-) and p-nbz(-) were carried out and showed that supermolecules with a RS(2) stoichiometry are formed with the first three anions, but RS(4) with p-nbz(-). In all cases the binding occurs outside the macrocyclic cavity via N-H...O=C hydrogen bonds for carboxylate anions and N-H...F hydrogen bonds for the PF(6)(-) anion, which is in agreement with the solution results. The macrocyclic framework adopts different conformations in order to interact with each substrate having Fe...Fe intramolecular distances ranging from 10.125(14) to 12.783(15)A.     

Determination of sub‐ppb epichlorohydrin levels in water by on‐line solid‐phase extraction liquid chromatography/tandem mass spectrometry

A new sensitive and selective method based on on‐line solid‐phase extraction (SPE) coupled to liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI‐MS/MS) using a triple quadrupole mass spectrometer has been developed for the determination of epichlorohydrin (ECH) in different types of water samples. ECH is not easily determined directly by ESI‐MS as it is not readily ionized, and it has a low molecular mass and high polarity. Thus, prior derivatization of ECH was necessary, employing 3,5‐difluorobenzylamine as a derivatizing agent with Fe(III) as a catalyst. In order to achieve accurate quantification, correcting for matrix effects, losses in the derivatization process and instrumental deviations, isotope labelled ECH (ECH‐d₅) was added as an internal standard (IS) to the water samples. The method was validated based on European SANCO guidelines using drinking and other types of treated water spiked at two concentration levels (0.1 and 1.0 µg/L), the lower level having been established as the limit of quantification (LOQ) of the method. Satisfactory accuracy (recoveries between 70 and 103%), precision (RSD <20%) and linearity (from 0.05 to 50 µg/L, r >0.99) were obtained. The limit of detection (LOD) was set up at 0.03 µg/L. The method was applied to different water samples (drinking water and water samples collected from a municipal treatment water plant). In order to enhance confidence, five selected reaction monitoring (SRM) transitions were acquired, thus obtaining a simultaneous reliable quantification and identification of ECH in water, even at sub‐ppb levels. Copyright © 2009 John Wiley & Sons, Ltd.     

Gold‐ or Platinum‐Catalyzed Cascade Processes of Alkynol Derivatives Involving Hydroalkoxylation Reactions Followed by Prins‐Type Cyclizations

An efficient method for the synthesis of [3.3.1]bicyclic compounds from easily available alkynol derivatives has been developed. The reaction is based on a gold‐ or platinum‐catalyzed tandem process that involves an intramolecular hydroalkoxylation of a triple bond followed by a Prins‐type cyclization. The reaction has been carried out with differently substituted alkynol derivatives and oxygen‐, nitrogen‐, and carbon‐centered nucleophiles. The incorporation of halogen atoms as nucleophiles and elimination reactions has also been studied. Enantiomerically pure [3.3.1]bicyclic systems were easily synthesized from the chiral pool.     

Rigid ferrocenophane and its metal complexes with transition and alkaline-earth metal ions

The rigid [6]ferrocenophane, L¹, was synthesised by condensation of 1,1′-ferrocene dicarbaldehyde with trans-1,2-diaminocyclohexane in high dilution at r.t. followed by reduction. When other experimental conditions were employed, the [6,6,6]ferrocenephane (L²) was also obtained. Both compounds were characterised by single crystal X-ray crystallography. The protonation of L¹ and its metal complexation were evaluated by the effect on the electron-transfer process of the ferrocene (fc) unit of L¹ using cyclic voltammetry (CV) and square wave voltammetry (SWV) in anhydrous CH₃CN solution and in 0.1 M ⁿBu₄NPF₆ as the supporting electrolyte. The electrochemical process of L¹ between −300 and 900 mV is complicated by amine oxidation. On the other hand, an anodic shift from the fc/fc⁺ wave of L¹ of 249, 225, 81 and 61 mV was observed by formation of Zn²⁺, Ni²⁺, Pd²⁺ and Cu²⁺ complexes, respectively. Whereas Mg²⁺ and Ca²⁺ only have with L¹ weak interactions and they promote the acid-base equilibrium of L¹. This reveals that L¹ is an interesting molecular redox sensor for detection of Zn²⁺ and Ni²⁺, although the kinetics of the Zn²⁺ complex formation is much faster than that of the Ni²⁺ one. The X-ray crystal structure of [PdL¹Cl₂] was determined and showed a square–planar environment with Pd(II) and Fe(II) centres separated by 3.781(1) Å. The experimental anodic shifts were elucidated by DFT calculations on the [ML¹Cl₂] series and they are related to the nature of the HOMO of these complexes and a four-electron, two-orbital interaction.     

Composition and chemical variability of leaf oil of Myrtus communis from north-eastern Algeria

The chemical composition of 27 oil samples of Myrtus communis isolated from leaves collected in three locations in north-eastern Algeria was investigated by GC(RI) and 13C NMR spectroscopy. Yields ranged between 0.2-1.2% (w/w). The chemical composition of the oils was largely dominated by monoterpene hydrocarbons, with alpha-pinene (40.5-64.0%), 1,8-cineole (10.9-29.1%) and limonene (6.7-8.2%) being the major compounds. In all the samples, 3,3,5,5,8,8-hexamethyl-7-oxabicyclo[4.3.0]non-1(6)-ene-2,4-dione was identified (0.8-1.5%). The composition is similar to that reported for myrtle oils from Corsica, Sardinia and Tunisia, but differed from that of Moroccan and Spanish myrtle oils.     

Accurate measurement of small heteronuclear coupling constants from pure-phase α/β HSQMBC cross-peaks

A simple proton-selective α/β-HSQMBC experiment is proposed for the accurate measurement of long-range proton-carbon coupling constants (nJCH) in small molecules without need for an individualized and time-consuming post-processing fitting procedure. The method acquires two pure-phase In-phase (IP) and Anti-phase (AP) multiplets completely free of any phase distortion due to the absence of JHH evolution. Accurate nJCH values can be directly measured analyzing the relative displacement of the resulting IPAP cross-peaks. Discussion about signal intensity dependence and cross-talk is made for a range of experimental conditions. The robustness of the method is evaluated by comparing the nJCH value measured from the analysis of the three available IP, AP and IPAP multiplet patterns. Multiple-frequency and region-selective versions of the method can also be efficiently recorded provided that excited protons are not mutually coupled.