Chemical modification of the surface of a sulfonated membrane by formation of a sulfonamide bond

This paper describes a novel approach for the surface modification of a cation-exchange membrane, bearing sulfonate groups, by a cationic layer. The modification procedure involved the chlorosulfonation of the sulfonate groups of the base membrane with thionyl chloride, followed by a reaction with a diamine to yield a sulfonamide bond and a terminal amine. The latter could be quaternized by reaction with methyl iodide or protonated by soaking in acidic media. The membranes were characterized in detail by attenuated total reflectance Fourier transform infrared and X-ray photoelectron spectroscopies as well as elemental analysis to confirm that the above reactions occurred. The selectivity of these membranes toward the electrochemically assisted transport of protons versus Zn2+ metallic cations was determined during an electrodialysis in a two-compartment electrochemical cell. The data indicate a significant decrease of the transport of the metallic cations following modification of the membrane with the cationic layer. The later allows for the transport of protons from the catholyte to the anolyte compartment with much improved selectivity since the divalent cations are excluded from the membrane due to the electrostatic barrier of the cationic layer.     

Vitamin D: a concise synthesis of the C19 hydroxylated enyne A-ring, an interesting precursor for the preparation of C19 substituted vitamin D analogues

A new C₁₉ hydroxylated enyne 15, as potential A-ring building block of vitamin D analogues, was synthesized in enantiomerically pure form in nine steps from (−)-(S)-limonene. This short synthesis involved ozonolyzis of 1,2-limonene oxide followed by a Criegee rearrangement, epoxide trans diaxial ring opening by lithium acetylide, elimination, epoxidation and syn β-elimination of the resulting homopropargylic oxirane.     

Radionuclides in a sediment trap and bottom sediment samples from the eastern Turkish coast of the Black Sea

Summary Radionuclide (¹³⁷Cs, ²³⁸U, ²³²Th and ⁴⁰K) concentrations were determined in a sediment trap and bottom sediment samples collected from a station at the eastern Turkish coast of the Black Sea. The specific activity of the ¹³⁷Cs radionuclide in the settling particles ranged from 0.04±0.01 to 0.10±0.02 Bq^. g^-1dry weight. The calculated flux rate of the ¹³⁷Cs was between 0.37 and 2.59 Bq^. m^-2. d^-1in the sampling periods of 2002 and 2003. The ¹³⁷Cs concentration in the bottom sediment profile were between 0.039±0.013-9.083±0.017 Bq^. g^-1dry weight in the same station. The vertical profile of the radionuclides suggests that they have little mobility during the 17 years after the Chernobyl accident.     

Saturated heterocycles, 162 [1]. synthesis and steric structures of 3,4-disubstituted 1,6,7,11b-tetrahydropyrimido[6,1-a]isoquinolin-2-ones

The reaction of 1-(hydrazidomethyl)-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline 3 with aromatic aldehydes yield hydrazones 4a,b or pyrimido[6,1-a]isoquinolines 5a-c depending upon the proportions of the reagents. With ketones, 3 gives only hydrazones 4a-d and 7 , which can be transformed to pyrimidoisoquinolines 10a-e and 11 with aldehydes. The ring closures are stereospecific; the relative configurations were determined by DNOE measurements.     

Gravity-induced convective flow in microfluidic systems: electrochemical characterization and application to enzyme-linked immunosorbent assay tests

A way of using gravity flow to induce a linear convection within a microfluidic system is presented. It is shown and mathematically supported that tilting a 1 cm long covered microchannel is enough to generate flow rates up to 1000 nL.min(-1), which represents a linear velocity of 2.4 mm.s(-1). This paper also presents a method to monitor the microfluidic events occurring in a covered microchannel when a difference of pressure is applied to force a solution to flow in said covered microchannel, thanks to electrodes inserted in the microfluidic device. Gravity-induced flow monitored electrochemically is applied to the performance of a parallel-microchannel enzyme-linked immunosorbent assay (ELISA) of the thyroid-stimulating hormone (TSH) with electrochemical detection. A simple method for generating and monitoring fluid flows is described, which can, for instance, be used for controlling parallel assays in microsystems.     

Synthesis and structure of Li4Sr3Ge2N6: a new quaternary nitride containing Ge2N6 anions

A new Li-containing quaternary nitride, Li₄Sr₃Ge₂N₆, was obtained as single crystals from constituent elements in molten Na. It crystallizes in space group C2/m (No. 12) with a=6.1398(7) Å, b=10.021(1) Å, c=6.3130(7) Å, β=91.279(2)°, and Z=2. It contains the first example of isolated nitridogermanate anions of Ge₂N₆¹⁰⁻, which is also the first example of edge-sharing tetrahedral [GeN₄].     

Beitr?ge zur titrimetrischen Bestimmung von dimeren Hydroxyaldehyden

Zusammenfassung Es wurden die Möglichkeiten für die titrimetrische Bestimmung von dimerem Glykolaldehyd (Fp: 94–96° C) und dl-Glycerinaldehyd (Fp: 138–141° C) untersucht. Die systematischen Fehler der auf Grund verschiedener funktioneller Gruppen durchführbaren Messungen sind von der Stabilität ihrer cyclischen Halbacetale sowie von den ihrer Depolymerisation folgenden weiteren Gleichgewichten bestimmt. Das aus dem dl-Glycerinaldehyd gebildete Halbacetal besitzt höhere Stabilität als dasjenige aus dem Glykolaldehyd.Mit der Hydrogensulfit-Methode werden 95–96%, mit der Hydroxylamin-Methode dagegen 98–99% vom wahren Wert gefunden.In Wasser gelöst zersetzt sich der Glykolaldehyd verhältnismäßig rasch, und das Gleichgewicht kann durch beide Aldehydreaktionen quantitativ gegen die Monomerenform verschoben werden.Unsere Untersuchungen ergaben, daß die Hydroxylamin-Methode zur Bestimmung der in Form cyclischer Halbacetale kristallisierenden, dimeren Hydroxyaldehyde Vorteile gegenüber der Hydrogensulfit-Methode bietet.Frau Dipl.-Ing. Eva Varsányi-Kiss danken wir für die derivatographischen Aufnahmen und deren Auswertung.     

New transesterification reaction between acetylated wood and tetramethoxysilane: A feasibility study

Novel transesterification of acetylated maritime pine sapwood (Pinus pinaster Soland) reaction was performed with tetramethoxysilane (TMOS) in presence of dibutyltin oxide as a catalyst. Transesterification was confirmed by weight percent gain calculations (WPG), infrared spectroscopy (FTIR) as well as ¹³C and ²⁹Si NMR CP-MAS analysis. The results showed that transesterification indeed occurs via exchange of acetate groups from acetylated wood and methoxysilane groups from TMOS. The effect of temperatures and reaction time upon transesterification efficiency was also investigated.     

Influence of a silyl group on an allylic position. A theoretical approach

Allylsilanes show in certain cases a behaviour towards electrophiles which is opposite to that of its carbon homologues. Theoretical calculations using Dewar's MINDO/3 method performed on 3-methyl 3-butenyl trimethylsilane and 2-methyl 2-butene show that geometrical optimization leads to a silicon-allylic carbon bond nearly parallel to the double bond π cloud, and both net atomic charges and HOMO coefficients indicate an inversion between these two substrates.