Synthesis and structural studies of (2E,3E)-3-[(6-{[(1E,2E)-2-(hydroxyimino)-1-methylpropylidene]amino}pyridin-2-yl)imino]butan-2-one oxime, ligand and its mono-, di- and trinuclear copper(II) complexes

A new dioxime ligand, (2E,3E)-3-[(6-{[(1E,2E)-2-(hydroxyimino)-1-methylpropylidene]amino}-pyridin-2-yl)imino]butan-2-one oxime, (H₂Pymdo) (3) has been synthesized in H₂O by reacting 2,3-butenedione monoxime (2) with 2,6-diaminopyridine. Mono-, di- and tri-nuclear copper(II) complexes of the dioxime ligand (H₂Pymdo) and/or 1,10-phenanthroline have been prepared. The dioxime ligand (H₂Pymdo) and its copper(II) complexes were characterized by ¹H-n.m.r., ¹³C-n.m.r. and elemental analyses, magnetic moments, i.r. and mass spectral studies. The mononuclear copper(II) complex of H₂Pymdo was found to have a 1:1 metal:ligand ratio. Elemental analyses, stoichiometric and spectroscopic data of the metal complexes indicated that the metal ions are coordinated to the oxime and imine nitrogen atoms (C=N). In the dinuclear complexes, in which the first Cu(II) ion was complexed with nitrogen atoms of the oxime and imine groups, the second Cu(II) ion is ligated with dianionic oxygen atoms of the oxime groups and are linked to the 1,10-phenanthroline nitrogen atoms. The trinuclear copper(II) complex (6) was formed by coordination of the third Cu(II) ion with dianionic oxygen atoms of each of two molecules of the mononuclear copper(II) complexes. The data support the proposed structure of H₂Pymdo and its Cu(II) complexes.     

Synthesis and structural characterization of new oxorhenium and oxotechnetium complexes with XN2S-tetradentate semi-rigid ligands (X = O, S, N)

Twelve novel oxo-technetium and oxo-rhenium complexes based on N2S2-, N2SO- or N3S-tetradentate semi-rigid ligands have been synthesised and studied herein. By reacting the ligands with a slight excess of suitable [MO]3+ precursor (ReOCl3(PPh3)2 or [NBu4][99gTcOCl4]), the monoanionic complexes of general formula [MO(Ph-XN2S)]- could be easily produced in high yield. The complexes have been characterized by means of IR, electrospray mass spectrometry, elemental analysis, NMR and conductimetry. The crystal structures of [PPh4][ReO(Ph-ON2S)] 1b and [NBu4][99gTcO(Ph-ON2S)] 1c have been established. The [MO]3+ moiety was coordinated via the two deprotonated amide nitrogens, the oxygen and the terminal sulfur atoms in 1b and 1c. In both compounds, the ON2S coordination set is in the equatorial plane, and the complexes adopted a distorted square-pyramidal geometry with an axial oxo-group. The chemical and structural identity of the different prototypic complexes (rhenium, 99gTc complexes and their corresponding 99mTc radiocomplexes) have been also established by a comparative HPLC study.     

Structure of the liquid-vapor interface of water-methanol mixtures as seen from Monte Carlo simulations

Monte Carlo simulation of the vapor-liquid interface of water-methanol mixtures of different compositions, ranging from pure water to pure methanol, have been performed on the canonical (N, V, T) ensemble at 298 K. The analysis of the systems simulated has revealed that the interface is characterized by a double layer structure: methanol is strongly adsorbed at the vapor side of the interface, whereas this adsorption layer is followed at its liquid side by a depletion layer of methanol of lower concentration than in the bulk liquid phase of the system. The dominant feature of the interface has been found to be the adsorption layer in systems of methanol mole fractions below 0.2, and the depletion layer in systems of methanol mole fractions between 0.25 and 0.5. The orientation of the molecules located at the depletion layer is found to be already uncorrelated with the interface, whereas the methanol molecules of the adsorption layer prefer to align perpendicular to the interface, pointing straight toward the vapor phase by their methyl group. Although both the preference of the molecular plane for a perpendicular alignment with the interface and the preference of the methyl group for pointing straight to the vapor phase are found to be rather weak, the preference of the methyl group for pointing as straight toward the vapor phase as possible within the constraint imposed by the orientation of the molecular plane is found to be fairly strong. One of the two preferred orientations of the interfacial water molecules present in the neat system is found to disappear in the presence of methanol, because methanol molecules aligned in their preferred orientation can replace these water molecules in the hydrogen-bonding pattern of the interface.     

Micromechanics of fatigue crack propagation in glassy thermoplastics

By the aid of the optical interference method the size of the craze zone at the crack tip has been measured during fatigue crack propagation (FCP) in two glassy thermoplastics thus giving a basis to re-examine proposed models. In contrast to previous assumptions it has been found, that in PMMA of high molecular weight crack propagation occurs only during a short interval of the loading cycle when the fibrils are stretched most severely and it is not limited by crack tip blunting; between the dimensions of the craze zone and the crack advance per cycle which is also reflected by markings on the fracture surface no simple correlation has been found. In PVC first the craze grows continuously during many loading cycles up to its final size and then the crack propagates by a jump separating the craze zone only partly. Thus at all stress intensity levels investigated the length of the final craze zone has been found to be distinctly larger than the jump spacing on the fracture surface. By aid of SEM-photography it is shown that in PVC during FCP cracking occurs by separation of fibrils instead of void coalescence.     

A new synthesis of pyrazolo[1,5-d][1,2,4]triazines from pyrazolecarboxylic acid hydrazides and carbonyl compounds. I

Pyrazolo[1,5-d][1,2,4]triazines were synthesized from pyrazolecarboxylic acid hydrazides and carbonyl compounds. Pyrazolecarboxylic acid N-phenylhydrazide (1c) and formaldehyde gave not only the expected 4hn but 5 , respectively. The methyl substituted hydrazides with acetone afforded hydrazones, pyrazolotriazines or 13 depending on the position of the substituents. The reduction of both products yielded pyrazolecarboxylic acid hydrazides.     

Crystallization of poly(N-methyldodecano-12-lactam) in blends with poly(styrene-stat-acrylic acid)

Crystallization behaviour of blends of poly(N-methyldodecano-12-lactam) (PMDL) with statistical copolymer poly(styrene-stat-acrylic acid) (PSAA) has been studied by the DSC and WAXD methods. The blend films prepared from dioxane solutions were crystallized at laboratory temperature for five days. Approximate crystallinities of as-prepared neat lower- PMDL 5 and higher-molecular weight PMDL 45 were 28% and 19%, respectively. With increasing PSAA content in the blends the crystallinities decreased sharply. The melting point of the primary crystalline structure of PMDL showed a decreasing dependence on PSAA content in the blends, confirming miscibility of the PMDL-PSAA pair. Recrystallization was strongly suppressed in the blends. The lower-melting endotherm appearing at about 10-15 °C above the crystallization temperature was attributed to melting to less perfect structures formed during secondary crystallization. In neat PMDL, the extent of secondary crystallization was approximately 5-10%. In the blends containing 20% PSAA approximate relative proportion of secondary crystallites on total crystallinity was 40% and 60% for the blends with PMDL 5 and PMDL 45, respectively. WAXD measurements did not reveal any change in crystal modification on blending. Increased T_g in blends of flexible PMDL cannot play a significant role in suppression of primary in favour of secondary crystallization. This was attributed to low mobility of PMDL chains due to dilution effect and specific interactions with the amorphous copolymer component, and, in case of the higher-molecular-weight PMDL, a greater involvement of entanglements. Higher T_g of blends was involved in retardation of non-isothermal crystallization on cooling and subsequent cold crystallization.     

Molecular structure of an alkyl-side-chain polymer-water interface: origins of contact angle hysteresis

A new and direct approach to verify surface heterogeneity as the microscopic origin of contact-angle hysteresis is demonstrated. IR-visible sum-frequency-generation spectroscopy (SFG) was used to selectively probe the molecules at the interface of an alkyl-side-chain polymer [poly(vinyl n-octadecyl carbamate-co-vinyl acetate)] with water. The spectra indicate that in contact with water, the polymer surface is heterogeneous (having areas of differing surface energies). This evidence of surface heterogeneity supports the hysteresis observed in the advancing and receding contact angles of the polymer surface with water. The same measurements made for the chemically and structurally similar surface of an octadecyltrichlorosilane self-assembled monolayer indicates a homogeneous surface at the water interface. In this case, contact-angle hysteresis measurements implicate surface roughness as the cause of hysteresis. Atomic force microscopy measurements of roughness for these surfaces further support our conclusions. The polymer-water interface was probed using SFG at above-ambient temperatures, and an order-to-disorder transition (ODT) of alkyl side chains at the interface was observed, which closely follows the melting of crystalline side chains in the bulk. This transition explains the increased wettability of the polymer, by water, when the temperature is raised above the bulk melting temperature. Furthermore, the irreversibility of this ODT suggests that the disordered polymer-water interface is the thermodynamic equilibrium state, whereas the before-heating structure of this interface is a kinetically hindered metastable state.     

Modification of ion-exchange membrane used for separation of protons and metallic cations and characterization of the membrane by current-voltage curves

The ionic transport properties of several cations (H(+), Na(+), and Zn(2+)) across sulfonated ion-exchange membranes modified with an amine were investigated by the measurement of current-voltage curves to determine the effect of the surface modification of the membrane. The membrane was modified by chlorosulfonation and amination with a diamine (N,N-dimethylethylenediamine) and an amine (isoamylamine) to form a sulfonamide bond between amine groups and the surface layer. In the case of the modification with the diamine, the terminal amine was protonated in acidic media or quaternized with methyl iodide. The presence of a positively charged layer on the two sides of the membrane strongly decreased the limiting current flowing across the membrane in the presence of a 1:1 electrolyte such as HCl or HNO(3) due to an increase of the resistance of the membrane. In the case of divalent cations such as Na(+) and Zn(2+), electrostatic repulsion also contributes to the decrease of the limiting current. The presence of divalent anions seems to increase the limiting current somewhat due to their preconcentration within the cationic layer, which facilitates their subsequent transport across the membrane. When only one face of the membrane was modified, the current-voltage measurements showed that the membrane did not behave like a bipolar membrane. For one-side (under forward polarization) and two-side modified membranes, counterions are slightly blocked in the membrane by the cationic layer, which led to a decrease of the membrane conductivity during electrodialysis.     

Semiautomatic and automatic catalytic amperometric and catalytic constant-current potentiometric titrations of gold(III)

Semiautomatic and automatic amperometry and constant-current potentiometry were used to follow the course of catalytic titration of gold(III) with potassium iodide. The Ce(IV)-As(III) system in the presence of sulfuric acid was used as the indicator reaction. The possibilities of the application of two types of graphite electrodes were investigated. The effect of concentration of the indicator reaction components, and the presence of organic solvents and acids on the shape of the catalytic titration curves was studied. Amounts of 80–900 μg of gold(III) were determined with a relative standard deviation less than 1.1%. The results obtained are in good agreement with those of comparable methods.     

On the reaction of dithiocarbamates with nitrogen-containing derivates of oxalic acid

Summary The action of bisimidochlorides of oxalic acid on dithiocarbamates produces 2-thioxo-3-aryl(alkyl)-4,5-diiminothiazolidines by cycloacylation. The molecular structure of 2-thioxo-3-(4-methoxyphenyl)-4,5-bis(phenylimino)-thiazolidine is confirmed by X-ray crystal structure analysis.

---

Zur Reaktion von Dithiocarbaminaten mit stickstoffhaltigen Derivaten der Oxalsäure

Zusammenfassung Bei der Einwirkung von Bisimidchloriden der Oxalsäure auf Dithiocarbaminate entstehen durch Cycloacylierung 2-Thioxo-3-aryl(alkyl)-4,5-diiminothiazolidine. Die Molekülstruktur von 2-Thioxo-3-(4-methoxyphenyl)-4,5-bis(phenylimino)thiazolidin wird durch Röntgenkristallstrukturanalyse bestätigt.