Kinetics of the manganese(III)-oxalate reaction in acidic sulphate media

The kinetics of the reaction of manganese(III) with oxalic acid (OA) has been studied in H₂SO₄ solutions. Under the experimental conditions of 6 × 10^–3 <>₀ < 0.4=" mol=">^–3 and [H₂SO₄]₀ 0.2 mol dm^–3 the observed pseudo-first order rate constant k _obs follows the expression

The extraction of HCl by TDPO in benzene

The results of the extraction of HCl by TDPO in benzene and the co-extraction of water are discussed. From the infrared spectra of normal (HCl-H₂O) and deuterated (DCl-D₂O) systems it may be concluded that TDPO·HCl·H₂O is formed in the organic phase on extraction from aqueous solutions with c_HCl≤5M, and TDPO·HCl with c_HCl>5M. Compounds such as TDPO·2HCl are found in the organic phase if there is an excess of HCl in the organic phase. From cryoscopic and viscosity measurements of the organic phase, conclusions can be made about the presence of polymeric compounds in this phase.     

The relationship between the structures of Cu(II) complexes and their chemical transformations: VII

The thermal decompositions of Cu(en)₂(NCS)X. where X^–=Cl^–, Br^–, NO ₃ ^– , BF ₄ ^– and ClO ₄ ^– , have been studied in comparison with the courses of Cu(en)₂(SCN)₂ and Cu(en)₂X₂ decomposition. It is shown that the presence of the thiocyanate group in the complexes Cu(en)₂(NCS)X is the most important factor in the decomposition course, in agreement with the fact that the anions X^– are not coordinated. or are only semicoordinated. Significant differences were found in the courses of thermal decomposition of two forms of Cu(en)₂(NCS)(BF₄) differing in the structure of their coordination polyhedra.

---

Zusammenfassung Die thermische Zersetzung von Cu(en)₂(NCS)X (X=Cl Br, NO₃, BF₄ und ClO₄) wurde untersucht und mit der von Cu(en₂(SCN)₂ und Cu(en)₂X₂ verglichem. Der den Verlauf der Zersetzung entscheidend bestimmende Faktor isi die Anw esenheit der Thiocyanat-Gruppe in den Cu(en)₂(NCS)X-Komplexen, was in Übereinstimmung damit steht,. daß die Anionen X nicht oder nur teilweise koordiniert sind. Es wurden signifikante Unterschiedeim Verlauf der thermischen Zersetzung von zwei sich in der Struktur ihrer Kordinationspolyeder unter-, heidenden Formen von Cu(en)₂(NCS)(BF₄) gefunden.

---

Cu(en)₂(NCS)X (X^–=Cl^–, Br^–, NO ₄ ^– , NO ₃ ^– , BF₄ ClO₄, Cu(en)₂(SCN)₂ Cu(en)₂(X)₂. , Cu(en)₂(NCS)X X Cu(en) (NCS)BF₄ i .

     

Determination of imazalil by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

A simple, rapid and reproducible capillary isotachophoretic on-line coupled with capillary zone electrophoresis (CITP-CZE) method for the determination of IMz in food packaging extracts and its residues in apples is described. A good separation of the IMZ from other sample constituents was achieved within 15 minutes without any sample clean up. Method characteristics (linearity, accuracy, intra-assay and detection limit) were determined. Less amount of time involved, sufficient sensitivity and low running cost are the important attributes of CITP-CZE method.     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.     

Study of perrhenate reduction by capillary electrophoresis

The influence of perrhenate concentration, the concentration of the reducing agent and pH of the reaction mixture on the yield of perrhenate reduction were studied to find a possibility to decrease the stannous chloride concentration in the reaction mixture without negative changes on the yield of perrhenate reduction. Britton-Robinson buffer solutions were selected as the background electrolytes because of their buffering capacity in a wide pH interval. The highest degree of perrhenate reduction was obtained at pH 2 at perrhenate concentrations ranging from 10(-4) to 10(-3) mol/L. The stability of reduced rhenium against pH change from 2 to 5.5 and against dilution of rhenium in the reaction mixture to the concentration suitable for the application in radiotherapy were studied as well. The results obtained by capillary electrophoresis and by thin-layer chromatography with radiometric detection were compared.     

The detection of formaldehyde in textiles using interdigitated microelectrode array diffusion layer titration with electrogenerated hypobromite

An interdigitated microelectrode array (IDA) was applied to the determination of formaldehyde released from textiles produced in industry. The proposed method is based on formaldehyde reaction with hypobromite which is formed in weakly basic media by control current electrooxidation of bromide on the generator segment of the IDA array. The unreacted hypobromite diffuses through the gap between individually polarisable IDA segments and it is amperometrically detected on the collector segment of the IDA. The efficiency of this nonconvective transfer process in the absence of formaldehyde was substantially higher (78%) in comparison with that when using the rotating ring disc electrode. The influence of the added formaldehyde on the transfer process can be utilised to develop a simple and sensitive analytical procedure for formaldehyde detection with a detection limit of 4×10⁻⁶ mol dm⁻³.     

Reactions of substituted furo[3,2-<Emphasis Type="Italic">b</Emphasis>]pyrrole-5-carboxhydrazides and their biological activity

The reactions of substituted furo[3,2-b]pyrrole-5-carboxhydrazides 1 with 5-arylfuran-2-carboxaldehydes 2, 4,5-disubstituted furan-2-carboxaldehydes 3 and thiophene-2-carboxaldehyde 4 has been studied. The advantage of microwave irradiation on some of these reactions was reflected in the reduced reaction time and increased yields. Reactions of 1 with 4-substituted 1,3-oxazol-5(4H)-ones 11 led to diacylhydrazines 13 or to imidazole derivatives 14 depending on the temperature. 1,2,4-Triazole-3-thione 17 was synthesized by two-step reaction of 1 with phenylisothiocyanate and subsequent base-catalyzed cyclization of thiosemicarbazide 16. The effects of hydrazones 5–10 on inhibition of photosynthetic electron transport in spinach chloroplasts and chlorophyll content in the antialgal suspensions of Chlorella vulgaris were investigated.     

Structure—activity relationships for <Emphasis Type="Italic">in vitro</Emphasis> oxime reactivation of chlorpyrifos-inhibited acetylcholinesterase

Organophosphorus pesticides parathion, chlorpyrifos, and malathion inhibit the enzyme acetylcholinesterase (AChE; EC 3.1.1.7) via phosphorylation of its active site. AChE reactivators and anticholinergics are compounds used as antidotes in the case of intoxication by these AChE inhibitors. In this work, chlorpyrifos, a representative member of this pesticide family, was used to inhibit the AChE activity of rat brain. The effect of twenty-one structurally different AChE reactivators was tested in vitro and subsequently, the relationship between their chemical structure and biological activity was outlined.     

Low-dimensional Compounds Containing Cyano Groups. XIII. Structural–spectral Correlation of Copper Dicyanoargentates

The new mixed-valence mixed-metal complex Cu(py)₆Cu₂Ag₂(CN)₆ (py = pyridine) possesses a three dimensional polymeric crystal structure. The Cu(I) atom is tetrahedrally coordinated by two nitrogen atoms of pyridine molecules, by one nitrogen atom of the dicyanoargentate anion and by one carbon atom of the cyano group. Both the dicyanoargentate anion and the cyano group bridge the Cu(I) atom with neighboring Cu(II) atoms. These are hexacoordinated in the form of an elongated tetragonal bipyramid. The equatorial plane is formed by two nitrogen atoms from two pyridine molecules and two nitrogen atoms from bridging cyano groups. Axial positions are occupied by nitrogen atoms of the bridging [Ag(CN₂]⁻ anions. Correlation between structures of the title compound and seven other dicyanoargentates with their i.r. spectra has been studied. The coordination mode of [Ag(CN₂]⁻ anions in compounds Cu_8-xAg_x(tn)₃(CN)₁₀ x = 0.25, Cu(3-Mepy)₂Ag₂(CN)₄, Cu(py)₂Ag₂(CN)₄ and Cu(py)₄Ag₂(CN)₄ (tn is 1,3-diaminopropane, 3-Mepy is 3-methylpyridine) is predicted based on this correlation.