Comparison of the Chemical Stability of Li1−xCoO2 and Li1−xNi0.85Co0.15O2 Cathodes

The chemical stability of the layered Li_1−xCoO₂ and Li_1−xNi_0.85Co_O.15O₂ cathodes is compared by monitoring the oxygen content with lithium content (1−x) in chemically delithiated samples. The Li_1−xCoO₂ system tends to lose oxygen from the lattice at deep lithium extraction while the Li_1−xNi_0.85Co_0.15O₂ system does not lose oxygen at least for (1−x)>0.3. This difference seems to result in a lower reversible (practical) capacity (140 mA h/g) for LiCoO₂ compared to that for LiNi_0.85Co_0.15O₂ (180 Ma h/g). The loss of significant amount of oxygen leads to a sliding of oxide layers and the formation of a major P3 and a minor O1 phase for the end member CoO_2−δ with δ=0.33. In contrast, Ni_0.85Co_0.15O_2−δ with a small amount of δ=0.1 maintains the initial O3 layer structure.     

Determination of manganese and zinc in powdered chocolate samples by slurry sampling using sequential multi-element flame atomic absorption spectrometry

In the present work, a slurry sampling flame atomic absorption spectrometric method to determine directly manganese and zinc in powdered chocolate samples is proposed. The optimization step was performed using univariate methodology involving the following factors: nature and concentration of the acid solution, sonication time, and particle size. The established conditions led to the use of a sample mass of 150 mg, 2.0 mol L^− 1 nitric acid solution, sonication time of 15 min, and a slurry volume of 50 mL. This method allows the determination of manganese and zinc with detection limit of 52 and 61 ng g^− 1, respectively, and a precision expressed as relative standard deviation (RSD) of 2.6% and 3.2% (both, n = 10) for contents of manganese and zinc of 52.4 and 100.0 μg g^− 1, respectively. The proposed method was applied for determination of manganese and zinc in five powdered chocolate samples. In these, the manganese content varied from 42.8 to 52.7 and from 88.6 to 102.4 μg g^− 1 of zinc. The analytical results were compared with the results obtained by analysis of these samples after digestion using open vessel and acid bomb digestion procedures and determination using FS-FAAS. The statistical comparison by t-test (95% confidence level) showed no significant difference between these results.     

Counterions in poly(allylamine hydrochloride) and poly(styrene sulfonate) layer-by-layer films

The amount of counterions in layer-by-layer (LBL) films of poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) has been determined with X-ray photoelectron spectroscopy (XPS) for films prepared from solutions with various NaCl concentrations. Sodium and chloride counterions are present in LBL films produced from salt solutions, which are located at the surface and in the bulk of the films. The percentage of bulk counterions increases with the ionic strength of the polyelectrolyte before reaching a constant value. The bulk sodium/sulfur percentage ratios tend to 0.8 for samples washed with pure water and for samples washed with NaCl aqueous solutions, while the bulk chlorine/nitrogen percentage ratios tend to 0.5 for the same samples. The ratio between the percentages of polyelectrolyte ionic groups lies close to unity for all samples, indicating that counterions do not contribute to charge compensation in the polyelectrolyte during the adsorption process. The presence of counterions in LBL films is explained by Manning condensation near the polyelectrolyte ionic groups, leading to inter-polyelectrolyte ionic bondings via ionic networks. It is believed that condensation leads to the formation of NaCl crystallites in these LBL films, which was confirmed by X-ray diffraction measurements.     

Selective extraction of benzoic acid from landfill leachate by solid-phase extraction and ion-exchange chromatography

In this work a simple method was described for selective extraction of benzoic acid from landfill leachate samples. The samples were submitted to solid-phase extraction (SPE) with XAD-4 resin as the stationary phase and ion-exchange chromatography (IEC) using the ion-exchange resin Amberlyst A-27. The instrumental analysis was performed by gas chromatography with mass spectrometric detection (GC-MSD). Benzoic acid was isolated, identified and quantified. The extraction process is rapid, simple and of low cost. It was also environmental friendly, that is, it was used a minimum amounts of hazardous organic solvents and produced also minimum quantities of residues.     

Preliminary investigation of the application of on-line membrane extraction of trifluoroacetic acid as an aid to improvement of negative ion electrospray mass spectrometry data

We have recently investigated the biodegradation of a number of acidic aromatic compounds that give excellent chromatography using trifluoroacetic acid (TFA) based HPLC methods. Unfortunately HPLC methods using TFA are not usually compatible with detection by negative ion mass spectrometry as TFA suppresses ionisation of the analyte during the electrospray process. We present a preliminary investigation of the use of an anion-exchange micro-membrane suppressor to remove TFA on-line post column with the aim of improvement of mass spectral data using an aromatic acid as an example, Thus LC-MS using a TFA based HPLC method with negative ion mass spectral detection is shown to be possible with good sensitivity.     

A geometric construction of local representations of local Lie groups

Local transformation groups acting on a manifold X define a natural action of on a space D(X), of functions on X. The natural action induces a local representation of on a Hilbert subspace of the space of distributions on D(X).     

The Pesticide 3-(3,4-Dichlorophenyl)-1,1-dimethylurea (Diuron) Immobilized on Silica Gel Surface

A route for 3-(3,4-dichlorophenyl)-1,1-dimethylurea (diuron) immobilization on silica gel was established after reacting at the first stage the precursor silylant agent 3-trimethoxysilylpropylamine to the support. The pesticide was covalently bonded to available amine groups of the precursor, giving 1.03 mmol of amine per gram of silica. Infrared, (13)C, and (29)Si NMR spectra are in agreement with the proposed reaction between nitrogen of the amine group of the previously anchored silica to carbon on the para-position of the aromatic ring of the pesticide. The immobilization is clearly affected by the presence or absence of disprotonating agent, to give 12.50 and 68.40% reaction yield, respectively; these results were confirmed through elemental analysis. Copyright 2001 Academic Press.     

Adsorption of Co(II), Ni(II), Cu(II), and Zn(II) on hexagonal templated zirconia obtained thorough a sol-gel process: the effects of nanostructure on adsorption features

Using zirconium tetrabutoxide, diaminedecane, and diamineoctane as precursors, a templated hexagonal zirconia matrix is synthesized and characterized by X-ray diffractometry and scanning electron microscopy. The adsorption capacity of such a matrix toward Co(II), Ni(II), Cu(II), and Zn(II) from aqueous solutions is studied. The adsorption affinity of the synthesized hexagonal templated zirconia toward the cations is Cu(II)>Zn(II) >Ni(II)>Co(II). It is also verified that the adsorption of the cations follows a Langmuir and not a Freundlich isotherm. All obtained isotherms are of type I, according to the IUPAC classification. The observed adsorption affinity sequence can be explained by taking into account the velocity constant for the substitution of water molecules into the cation coordination spheres, as well as the Irving-Williams series.     

Transformation of wealth produced into quality of life: analysis of the social efficiency of nation-states with the DEA’s triple index approach

Although an essential condition for the occurrence of human development, economic growth is not always efficiently converted into quality of life by nation-states. Accordingly, the objective of this study is to measure the social efficiency—the ability of a nation-state to convert its produced wealth into quality of life—of a set of 101 countries. To achieve this goal, the Data Envelopment Analysis method was used in its standard, cross-multiplicative and inverted form, by means of a new approach called ‘triple index’. The main results indicated that the former Soviet republics and Eastern European countries stood out in terms of social efficiency. The developed countries, notwithstanding their high social indicators, did not excel in efficiency; however, the countries of south of Africa, despite having the worst social conditions, were also the most inefficient.