Unmanned platform for long-range remote analysis of volatile compounds in air samples

This paper describes a long-range remotely controlled CE system built on an all-terrain vehicle. A four-stroke engine and a set of 12-V batteries were used to provide power to a series of subsystems that include drivers, communication, computers, and a capillary electrophoresis module. This dedicated instrument allows air sampling using a polypropylene porous tube, coupled to a flow system that transports the sample to the inlet of a fused-silica capillary. A hybrid approach was used for the construction of the analytical subsystem combining a conventional fused-silica capillary (used for separation) and a laser machined microfluidic block, made of PMMA. A solid-state cooling approach was also integrated in the CE module to enable controlling the temperature and therefore increasing the useful range of the robot. Although ultimately intended for detection of chemical warfare agents, the proposed system was used to analyze a series of volatile organic acids. As such, the system allowed the separation and detection of formic, acetic, and propionic acids with signal-to-noise ratios of 414, 150, and 115, respectively, after sampling by only 30 s and performing an electrokinetic injection during 2.0 s at 1.0 kV.     

Isolation and characterization of cellulose nanofibers from banana peels

Cellulose nanofibers were isolated from banana peel using a combination of chemical treatments, such as alkaline treatment, bleaching, and acid hydrolysis. The suspensions of chemically treated fibers were then passed through a high-pressure homogenizer 3, 5, and 7 times, to investigate the effect of the number of passages on the properties of the resulting cellulose nanofibers. The cellulose nanofibers isolated in this study had a dry basis yield of 5.1 %. Transmission electron microscopy showed that all treatments effectively isolated banana fibers in the nanometer scale. The micrographs of the process steps used to isolate the nanofibers revealed gradual removal of amorphous components. Increasing number of passages in the homogenizer shortened the cellulose nanofibers while furnishing more stable aqueous suspensions with zeta potential values ranging from ?16.1 to ?44.1 mV. All the samples presented aspect ratio in the range of long nanofibers, hence being potentially applicable as reinforcing agents in composites. X-ray diffraction studies revealed that homogenized nanofiber suspensions were more crystalline than non-homogenized suspensions. Fourier transform infrared spectroscopy confirmed that alkaline treatment and bleaching removed most of the hemicellulose and lignin components present in the banana fibers. Thermal analyses revealed that the developed nanofibers exhibit enhanced thermal properties. In general, the nanoparticles isolated from the banana peel have potential application as reinforcing elements in a variety of polymer composite systems.     

Chemical Strategies for Dendritic Magneto-plasmonic Nanostructures Applied to Surface-Enhanced Raman Spectroscopy

Chemical analyses in the field using surface-enhanced Raman scattering (SERS) protocols are expected to be part of several analytical procedures applied to water quality monitoring. To date, these endeavors have been supported by developments in SERS substrate nanofabrication, instrumentation portability, and the internet of things. Here, we report distinct chemical strategies for preparing magneto-plasmonic (Fe₃O₄ : Au) colloids, which are relevant in the context of trace-level detection of water contaminants due to their inherent multifunctionality. The main objective of this research is to investigate the role of poly(amidoamine) dendrimers (PAMAMs) in the preparation of SERS substrates integrating both functionalities into single nanostructures. Three chemical routes were investigated to design magneto-plasmonic nanostructures that translate into different ways for assessing SERS detection by using distinct interfaces. Hence, a series of magneto-plasmonic colloids have been characterized and then assessed for their SERS activity by using a model pesticide (thiram) dissolved in aqueous samples.     

Highly sensitive ion preconcentration method based on flow sorbent extraction using multiwall carbon nanotubes

In this work a solid phase on-line uranium ion preconcentration system coupled with spectrophotometry has been developed. The method is based on uranyl ion preconcentration at pH 3.75 onto multiwall carbon nanotubes treated with HNO₃. After preconcentration, the uranyl ions are eluted with 0.32?mol?L^?1HCl followed by reaction with 3,6-bis[(2-arsonophenyl)-azo]-4,5-dihydroxy-2,7-naphthalendisulfonic acid 0.08%[w/v] (Arsenazo III), which had maximum monitored absorbance of 650?nm. Effects of the pertinent experimental parameters on the system were investigated by means of 2^6?2 fractional factorial design, while optimization was carried out using the Doehlert matrix. Under optimized conditions, detection and quantification limits were found to be 0.21 and 0.7?µg?L^?1, respectively. The analytical curve ranged from 5 to 150?µg?L^?1 (r?=?0.998), while the relative standard deviations (RSD) were 3.27 and 2.56% for the respective uranium concentrations of 10 and 100?µg?L^?1 (n?=?10). The features obtained for the on-line preconcentration system were: preconcentration factor of 228, concentration efficiency of 57?min^?1, consumption index of 0.13?mL and sample throughput of 15?h^?1. In order to assess the accuracy of the proposed method, addition and recovery studies were carried out on spring water samples from different sources and synthetic seawater with satisfactory results ranging from 94.85 up to 103.65%.     

Layered stable equilibria of a reaction-diffusion equation with nonlinear Neumann boundary condition

In this work we investigate the existence and asymptotic profile of a family of layered stable stationary solutions to the scalar equation ut=ε²Δu+f(u) in a smooth bounded domain Ω⊂R³ under the boundary condition εν_∂u=δεg(u). It is assumed that Ω has a cross-section which locally minimizes area and limε→0εlnδε=κ, with 0?κ<∞ and δε>1 when κ=0. The functions f and g are of bistable type and do not necessarily have the same zeros what makes the asymptotic geometric profile of the solutions on the boundary to be different from the one in the interior.     

On optimal zero-preserving corrections for inconsistent linear systems

This paper addresses the problem of finding an optimal correction of an inconsistent linear system, where only the nonzero coefficients of the constraint matrix are allowed to be perturbed for reconstructing a consistent system. Using the Frobenius norm as a measure of the distance to feasibility, a nonconvex minimization problem is formulated, whose objective function is a sum of fractional functions. A branch-and-bound algorithm for solving this nonconvex program is proposed, based on suitably overestimating the denominator function for computing lower bounds. Computational experience is presented to demonstrate the efficacy of this approach.     

Surfactant/oil/water system for the determination of selenium in eggs by graphite furnace atomic absorption spectrometry

An oil-in-water formulation has been optimized to determine trace levels of selenium in whole hen eggs by graphite furnace atomic absorption spectrometry. This method is simpler and requires fewer reagents when compared with other sample pre-treatment procedures. Graphite furnace atomic absorption spectrometric (GF AAS) measurement was carried out using standard addition calibration and Pd as a modifier. The precision, expressed as relative standard deviation, was better than 5% and the limit of detection was 1 µg L^− 1. The validation of the method was performed against a standard reference material Whole Egg Powder (RM 8415), and the measured Se corresponded to 95.2% of the certified value. The method was used for the determination of the Se level in eggs from hens treated with Se dietary supplements. Inorganic and organic Se sources were added to hen feed. The Se content of eggs was higher when hens were fed with organic Se compared to the other treatments. The proposed method, including sample emulsification for subsequent Se determination by GF AAS has proved to be sensitive, reproducible, simple and economical.     

Cross-sections for rotational excitations of C3H4 isomers by electron impact

We report elastic (rotationally summed) and rotationally resolved cross-sections for scattering of low-energy electrons by the C₃H₄ isomers allene, propyne, and cyclopropene, which belong to the D_2d, C_3v, and C_2v groups, respectively. We employed the Schwinger multichannel method with pseudopotentials at the static-exchange approximation, combined with the adiabatic-nuclei-rotation (ANR) approximation to calculate the rotational excitation cross-sections for energies ranging from 5 to 30 eV. Our rotational resolved cross-sections show the isomer effect more strongly related to scattering potentials of different molecular geometries and to transition selection rules than to differences in mass distribution which account for the energy spacing in the rotational spectra of the molecules.     

Solvent effect on the tautomers' stabilities of protonated N,N‐dimethylnitrosamine: The role of hydrogen bonds network

DFT calculations have been applied in order to study the free energies of the structures corresponding to the three different protonation sites of N,N‐dimethylnitrosamine (DMNA). The solvent effect has been taken into account through the study of clusters consisting of protonated DMNA and up to four explicit water molecules, either in the absence or in the presence of a continuum (CPCM) solvation model. Addition of water molecules has been done by a careful screening procedure through which all important hydrogen bonds are likely to be considered. Protonation of DMNA makes all their lone pairs no longer available for hydrogen bond formation with water molecules, such that hydrogen bonds have been observed, for almost all structures, only between water molecules and between one water molecule and the protonated DMNA, in this latter case intermediated by the proton. The stabilities of the solvated structures are governed not only by the number of hydrogen bonds but also by the positions of the water molecules involved in these bonds, as well as by which of them donate or accept H atoms. Our results indicate that oxygen protonation is the most favorable one, regardless of the presence of water molecules. In vacuum protonation at the N‐amino ( 2a ) is approximately as favorable as protonation at the N nitroso ( 2c ). However, in water the former protonation is by far the less favorable one. Our best estimates for the ΔG values in bulk solvent are: ΔG( 2a ) ≈ 17.9, ΔG( 1c ) ≈ 4.3, and ΔG( 2c ) ≈ 4.9 kcal/mol.     

Thermal characterization of usnic acid/collagen-based films

The purpose of this study was to evaluate the physical–chemical properties of collagen (CL) and usnic acid/collagen-based (UAC) films, using differential thermal analysis (DTA), thermogravimetry (TG/DTG), infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). Both films were prepared by casting process using polyethylene glycol 1500 (PEG 1500) as plasticizer. In the spectrum of UAC, similar bands of the usnic acid are observed, indicating that the polymerization (film formation) did not affect the stability of the drug. Distinctly, DTA curve of UAC did not show an endothermic peak at 201 °C, indicative that the drug was incorporated into the polymeric system. These results were corroborated by the scanning electron microscopy (SEM). The TG/DTG curves of UAC presented a different thermal decomposition profile compared to the individual compounds and CL. These findings suggest the occurrence of molecular dispersion or solubilization of the drug in the collagen film.