The hydrophobic effect in aqueous solutions of nonelectrolytes. I. Self-interactions of alkylureas

In order to clarify some aspects of the hydrophobic interactions, the enthalpies of dilution of monoethylurea, 1,3-dimethylurea, and 1,3-diethylurea have been determined calorimetrically at 25°C. The calorimetric data, expressed in terms of excess enthalpy, permit the evaluation of the pair and triplet interaction coefficients. The analyses of these and of the analogous coefficientsg _xx andg _xxx, derived from osmotic data, indicate a driving force favorable to the interactions among the hydrated solute molecules. Nevertheless, the positive values of theh _xx andh _xxx coefficients seem to suggest that the source of the effect is a rearrangement of the water molecules rather than a direct association of the solute molecules. There are evidences of a strict correlation between the enthalpic and the entropic effects. Preliminary data were presented at the International Conferences on Chemical Thermodynamics at Baden (1973) and Montpellier (1975). The experimental part was carried out at the Istituto Chimico of the University of Trieste. To whom correspondence should be addressed.     

N-Haloamidines-V: Reaction of N-chloro-N'-aroyl-acetamidines and -benzamidines with enamines

The reaction between N-chloro-N'-aroyl-amidines and β,β-disubstituted enamines affords 1 - aroyl - 4 -amino - 4,5 - dihydro - imidazoles in low yields, the main reaction product being N - (2 - morpholino - 2,2 -disubstituted) - ethylidene - N' - aroyl - amidines. A similar reaction course was not observed with enamines bearing a hydrogen atom in the β-position. In this case only products derived from electrophilic chlorination on enamines were isolated.     

Study of transport processes in plants by radioabsorption and microradiographic methods

The passive transport processes in plants of²²Na⁺,¹³⁷Cs⁺,⁴⁵Ca²⁺,⁶⁵Zn²⁺,⁵⁹Fe³⁺ and³²PO ₄ ³⁻ ions and the plant-protecting agent “Saphidon (¹⁴C)” were studied by a radioabsorption method. The parameters of the passive transport processes of²¹²Pb²⁺, borate and tetraborate ions in plants were measured by quantitative microradiographic methods, using photoemulsion and solid state nuclear track detectors. Ion diffusion concentration profiles within the plants were determined at various diffusion times and temperatures. The equation of linear diffusion combined with convection was used to determine the diffusion coefficients characteristic of the transport processes.     

Colour pigments of Trichoderma harzianum. Preliminary investigations with thin-layer chromatography-Fourier transform infrared spectroscopy and high-performance liquid chromatography with diode array and mass spectrometric detection

The colour pigments of Trichoderma harzianum fermentation broth were separated and the main fractions were tentatively identified by reversed-phase thin-layer chromatography-Fourier transform infrared spectroscopy (RP-TLC-FT-IR), RP-HPLC-diode array detection and RP-HPLC-MS. It was established that the multistep gradient elution developed for RP-TLC separation of pigments can be successfully used as a pilot method for the rational design of gradient elution in RP-HPLC for the separation of the same pigments. FT-IR and MS measurements were unable to identify the exact chemical structures of the main pigment fractions, the presence of OH, =CH and C=O (RP-TLC-FT-IR) and OH and NH, substructures (RP-HPLC-MS) was confirmed. It was assumed that the main pigment fractions are oxidation polymers originating from monomer molecules containing polar substructures and double bonds in the alkyl chain which are liable for oxidation during the aerobic fermentation process.     

Phase separation and disorder in half metallic ferromagnetic manganite thin films: A theoretical study looking forward low noise nano-devices

The resistivity of thin La_0.7Sr_0.3MnO₃ films was first investigated in a wide temperature (T) range (10–750 K). Films grown by different techniques and on several substrates enabled to analyze samples with different amounts of disorder. The aim of this work was to elucidate the nature of the metal–insulator (M–I) transition occurring at T = T_p in these films and its relation with the different kinds of inhomogeneities they could present like intrinsic electric disorder and co-existence of two different electrical and/or magnetic phases. The low-temperature resistivity state was described mostly by a law which scales as T with  ≈ 2.5. This supports the theoretical proposal of single magnon scattering in presence of minority spin states localized by the disorder. In the whole range of temperatures the experimental data are found to be consistent with a phase separation (PS) scenario. In order to go through the origin of the characteristic length scale of inhomogeneity found, preliminarily low frequency noise measurements as a function of T in a range of temperature around the M–I transition were made. The samples used were patterned using photolithography into bridges with various widths and lengths. No clear sign of separation phase dynamic has been observed in our noise measurements. Unexpectedly the normalized Hooge parameter _H/n was found not to be volume (Ω) independent. The LSMO electrical properties may strongly be driven by disorder and new design for magnetoresistance sensors may have to take into account their intrinsic PS.     

Effect of glycerol on micelle formation by ionic and nonionic surfactants at 25 degrees C

The effect of glycerol on the micellization of the cationic surfactant cetyltrimethylammonium bromide (CTAB) and of the ethoxylated nonionic surfactant Brij 58 has been investigated by various experimental techniques. For both surfactants the critical micellar concentration (cmc), determined by surface tension measurements, is almost unaffected by the presence of glycerol in the mixture; only at high glycerol concentrations (>/=20% w/w) does the cmc significantly increase. The area per surfactant molecule at the air-solution interface, A, increases with increasing glycerol weight percentage, w(g). Fluorescence quenching measurements indicate that the presence of glycerol induces a lowering of the aggregation number of both surfactants. The glycerol intradiffusion coefficient has been measured by the pulsed-gradient spin-echo NMR technique as a function of glycerol content at constant surfactant concentration. It is almost unaffected by the presence of the surfactants, indicating that no direct glycerol-surfactant interaction occurs in the mixture. The surfactant intradiffusion coefficient has been also measured. In the case of CTAB, it increases with increasing glycerol concentration, a reflection of the decreased aggregation number. For Brij 58, in spite of the lowering of the aggregation number, the surfactant intradiffusion coefficient decreases with increasing glycerol concentration, suggesting an increase of the intermicellar interaction. The experimental evidence shows that for both surfactants the micellization is affected by the presence of glycerol through an indirect, solvent-mediated mechanism. In the case of CTAB, the main effect of glycerol is a lowering of the medium dielectric constant, which enhances the electrostatic interactions in solution. In the case of Brij 58, the results can be interpreted in terms of a salting-out effect according to which glycerol competes with the surfactant for water molecules, causing a dehydration of the surfactant ethoxylic headgroup.     

PCDD, PCDF, and PCB contamination of air and inhalable particulate in Rome

Summary The isomer specific determination of PCDD, PCDF and PCB was carried out on samples of air and inhalable particulate from Rome. Samples were taken daily for six months and pooled to yield two samples per month. Normal PCDD+PCDF concentrations expressed in TEQ ranged from 48 to 87 fg/m³, while total PCB ranged from 0.1 to 1.4 ng/m³. The 2, 3, 7, 8-substituted PCDD and PCDF congener pattern is shown together with the PCB congener pattern.     

Preparation and characterization of Mg(II)-, Ca(II) and Cd(II) complexes of 1,2-ethanediol and water

Mixed ligand complexes of different compositions were prepared with water, sulfate ion and 1,2-ethanediol as ligand. IR spectra and the thermoanalytical curves of the complexes were recorded. Oxygen atoms bound by one or two coordinate bonds to the metal ion, or by hydrogen-bonds in the crystal, were observed. As for the water molecule, 1,2-ethanediol molecules of crystal and monohydrate type were found, depending on the type of binding of the oxygen atoms.This revised version was published online in November 2005 with corrections to the Cover Date.     

Synthesis, characterization, biocide and toxicological activities of di-n-butyl- and diphenyl-tin(IV)-salicyliden-beta-amino alcohol derivatives

The one pot reaction of salicylaldehyde 1, beta-amino alcohols 2a-2c, and di-n-butyltin(IV) oxide 3a or diphenyltin(IV) oxide 3b produced five diorganotin(IV) compounds, 4a-4c, 5a, and 5c, in good yields. All compounds were characterized by IR, (1)H, (13)C, and (119)Sn NMR spectroscopy, and elemental analysis; furthermore, compounds 4b, 4c, 5a, and 5c were characterized by X-ray diffraction analysis. After the structural characterization, all of the compounds were tested in vitro against Bacillus subtilis (Gram-positive, strain ATCC 6633), Escherichia coli (Gram-negative, strain DH5alpha), Pseudomonas aeruginosa (Gram-negative, strain BH3), Desulfovibrio longus (strain DSM 6739), and Desulfomicrobium aspheronum (strain DSM 5918) to assess their antimicrobial activity. Compounds 4 and 5 demonstrated a wide range of bactericidal activities against the tested aerobic (one Gram-positive and two Gram-negative subtypes) and anaerobic bacteria (two sulfate-reducing bacteria, SRB). Compound 5 had better bactericidal performances than compound 4. For all of the compounds, the acute toxicity was measured using luminescent bacteria toxicity (LBT-Microtox) tests to track their further environmental impact. According to these results and in order to fulfill environmental regulations, the toxicity of the compounds studied herein can be modulated through the proper selection of the disubstituted tin(IV) moiety.