Model-based electron microscopy: From images toward precise numbers for unknown structure parameters

Statistical parameter estimation theory is proposed as a method to quantify electron microscopy images. It aims at obtaining precise and accurate values for the unknown structure parameters including, for example, atomic column positions and types. In this theory, observations are purely considered as data planes, from which structure parameters have to be determined using a parametric model describing the images. The method enables us to measure positions of atomic columns with a precision of the order of a few picometers even though the resolution of the electron microscope is one or two orders of magnitude larger. Moreover, small differences in averaged atomic number, which cannot be distinguished visually, can be quantified using high-angle annular dark field scanning transmission electron microscopy images. Finally, it is shown how to optimize the experimental design so as to attain the highest precision. As an example, the optimization of the probe size for nanoparticle radius measurements is considered. It is also shown how to quantitatively balance signal-to-noise ratio and resolution by adjusting the probe size.     

Excitation and decay of the isovector giant monopole resonances via the 208Pb(3He,t p) reaction at 410 MeV

The excitation and subsequent proton decay of the isovector spin-flip giant monopole resonance (IVSGMR) is studied via the 208Pb(3He,t) reaction at 410 MeV. In the inclusive spectrum (60+/-5)% of the non-energy-weighted sum-rule strength for this 2 variant Planck's over 2h omega resonance was found in the region 29相似文献   

Tunable coupling of superconducting qubits

We study an LC circuit implemented using a current-biased Josephson junction (CBJJ) as a tunable coupler for superconducting qubits. By modulating the bias current, the junction can be tuned in and out of resonance and entangled with the qubits coupled to it. One can thus implement two-qubit operations by mediating entanglement. We consider the examples of CBJJ and charge-phase qubits. A simple recoupling scheme leads to a generalization to arbitrary qubit designs.     

First measurement of the ratio B(t --> Wb)/B(t --> Wq) and associated limit on the Cabibbo-Kobayashi-Maskawa element /V(tb)/

We present the first measurement of the ratio of branching fractions R identical withB(t-->Wb)/B(t-->Wq) from p_p collisions at sqrt[s] = 1.8 TeV. The data set corresponds to 109 pb(-1) of data recorded by the Collider Detector at Fermilab during the 1992-95 Tevatron run. We measure R = 0.94(+0.31)(-0.24)(stat+syst) or R>0.61 (0.56) at 90% (95)% C.L., in agreement with the standard model predictions. This measurement yields a limit on the Cabibbo-Kobayashi-Maskawa quark mixing matrix element /V(tb)/ under the assumption of three generations and unitarity.     

Measurement of d sigma/dM and forward-backward charge asymmetry for high-mass Drell-Yan e(+)e(-) pairs from pp macro collisions at square root of s = 1.8 TeV

We report on a measurement of the mass dependence of the forward-backward charge asymmetry, A(FB), and production cross section d sigma/dM for e(+)e(-) pairs with mass M(ee)>40 GeV/c(2). The data sample consists of 108 pb(-1) of pp macro collisions at square root of s = 1.8 TeV taken by the Collider Detector at Fermilab during 1992-1995. The measured asymmetry and d sigma/dM are compared with the predictions of the standard model and a model with an extra Z' gauge boson.     

Implicit LU-SGS algorithm for high-order methods on unstructured grid with p-multigrid strategy for solving the steady Navier–Stokes equations

The fluid dynamic equations are discretized by a high-order spectral volume (SV) method on unstructured tetrahedral grids. We solve the steady state equations by advancing in time using a backward Euler (BE) scheme. To avoid the inversion of a large matrix we approximate BE by an implicit lower–upper symmetric Gauss–Seidel (LU-SGS) algorithm. The implicit method addresses the stiffness in the discrete Navier–Stokes equations associated with stretched meshes. The LU-SGS algorithm is then used as a smoother for a p-multigrid approach. A Von Neumann stability analysis is applied to the two-dimensional linear advection equation to determine its damping properties. The implicit LU-SGS scheme is used to solve the two-dimensional (2D) compressible laminar Navier–Stokes equations. We compute the solution of a laminar external flow over a cylinder and around an airfoil at low Mach number. We compare the convergence rates with explicit Runge–Kutta (E-RK) schemes employed as a smoother. The effects of the cell aspect ratio and the low Mach number on the convergence are investigated. With the p-multigrid method and the implicit smoother the computational time can be reduced by a factor of up to 5–10 compared with a well tuned E-RK scheme.     

Non-stoichiometry and magneto-optic properties of magnetic bubble thin films of TmIG substituted with bismuth and gallium

Thulium iron garnet thin films substituted with bismuth and gallium were prepared by LPE from a PbO.B₂O₃ flux. Radioactive isotope tracers were added to the melt as the chemical analysis technique. The deviation from the ratio (Pb+Bi+Tm)/(Fe+Ga)=0.6 of the layers was large and a proportion of the thulium ions possibly lie on the octahedral crystallographic sites. The concentration of Bi, Pb, and Ga as a function of the growth temperature was studied. The magneto-optic properties show that the layers are well suited for use in a magneto-optic device. A figure of merit of 2.5 degree per decibel at λ=560 nm was obtained and some magnetic bubble parameters are also presented.     

Measuring methotrexate polyglutamates in red blood cells: a new LC-MS/MS-based method

The folate antagonist methotrexate (MTX) is the anchor drug in the treatment of rheumatoid arthritis. The therapeutic effects of MTX are attributed to the intracellular levels of MTX, present in the cell as polyglutamates (MTXPGn). We developed a new liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS)-based assay to separately quantitate MTXPGn in red blood cells using stable-isotope-labelled internal standards. Samples were analyzed by LC-ESI-MS/MS using a Waters Acquity UPLC BEH C18 column with a 5–100% organic gradient of 10 mM ammonium bicarbonate (pH 10) and methanol. The analysis consisted of simple sample preparation and a 6-min run time. Detection was done using a Waters Acquity UPLC coupled to a Waters Quattro Premier XE with electrospray ionization operating in the positive ionization mode. Assay validation was performed following recent Food and Drug Administration guidelines. The method was linear from 1–1,000 nM for all MTXPGn (R ²?>?0.99). The coefficient of variation ranged from 1–4% for intraday precision and 6–15% for interday precision. Samples were stable for at least 1 month at ?80 °C. Recovery ranged from 98–100%, and the relative matrix-effect varied from 95–99%. The lower limit of quantitation was 1 nM for each MTXPGn. Fifty patient samples from the tREACH study were analyzed. The MTXPGn concentration and distribution of these samples were comparable with values reported in literature. The developed LC-ESI-MS/MS method for the quantitative measurement of MTXPGn in red blood cells is both sensitive and precise within the clinically relevant range. The method can be easily applied in clinical laboratories due to the combination of simple pre-treatment with robust LC-ESI-MS/MS.

The Michael Addition of Enamines to Propenamidines. A Convenient Synthesis of 2β-Amidinoethylcyclo-Alkanones by Amidinoethylation Reaction

A variety of propenamidines 3 have been reacted with enamines of cyclopentanone and cyclohexanone giving after hydrolysis of the Stork enamine 6, 2-β-amidinoethylcyclopentanones 8 and -hexanones 7. This reaction illustrates the electrophilic character of the C=C double bond due to the conjugated amidine function, thus providing with propenamidines 3 a new class of Michael acceptors for enamines.     

A new non-synchronous preparative counter-current centrifuge—the next generation of dynamic extraction/chromatography devices with independent mixing and settling control,which offer a step change in efficiency

A new and significantly more robust design of non-synchronous coil planet centrifuge is introduced where the degree of mixing between two immiscible phases can be changed independently from the “g” field required to separate out the phases. A hypothesis that an optimum ratio between the speed of the bobbin and the speed of the rotor can be found to optimise the efficiency of the separation for a given force field is upheld for an intermediate polarity phase system. This paves the way for extensive further research to find the optimum non-synchronous conditions for a range of different phase systems that are desirable for the separation of large molecules, proteins and biologics but can tend to emulsify in the standard “J” type centrifuge systems currently available and routinely in use for aqueous organic phase systems. A step change of up to 30% in resolution and 90% in plate efficiency is demonstrated.