Simultaneous measurement of thermal properties in ferroelectric crystals

Simultaneous measurement of the influence of the electric field on specific heat, thermal conductivity and pyroelectric coefficient is described as a summary of previous papers. From these coefficients, which are determined by means of a flux calorimeter, the behaviour of other properties, such as thermal diffusivity and electrocaloric coefficient, is deduced.The data are compared with the findings obtained by other authors with traditional methods.

---

Zusammenfassung In Zusammenfassung vorhergehender Arbeiten wurde die simultane Messung des Einflusses von elektrischen Feldern auf spezifische Wärme, Wärmeleitfähigkeit und pyroelektrischen Koeffizienten beschrieben. Auf Grundlage dieser Konstanten, die mittels eines Fluxkalorimeters bestimmt wurden, konnte das Verhalten anderer Eigenschaften wie z. B. thermische Diffusionskonstante und elektrokalorischer Koeffizient abgeleitet werden. Die Daten wurden mit durch herkömmliche Methoden erhaltenen Ergebnissen anderer Autoren verglichen.

---

, . , , , . , .

---

---

This work has been supported by the Spanish C.A.I.C. y T.     

Synthesis, solid-state structure, and bonding analysis of the beryllocenes [Be(C5Me4H)2], [Be(C5Me5)2], and [Be(C5Me5)(C5Me4H)

The beryllocenes [Be(C(5)Me(4)H)(2)] (1), [Be(C(5)Me(5))(2)] (2), and [Be(C(5)Me(5))(C(5)Me(4)H)] (3) have been prepared from BeCl(2) and the appropriate KCp' reagent in toluene/diethyl ether solvent mixtures. The synthesis of 1 is facile (20 degrees C, overnight), but generation of decamethylberyllocene 2 demands high temperatures (ca. 115 degrees C) and extended reaction times (3-4 days). The mixed-ring beryllocene 3 is obtained when the known [(eta(5)-C(5)Me(5))BeCl] is allowed to react with K[C(5)Me(4)H], once more under somewhat forcing conditions (115 degrees C, 36 h). The structures of the three metallocenes have been determined by low-temperature X-ray studies. Both 1 and 3 present eta5/eta1 geometries of the slip-sandwich type, whereas 2 exhibits an almost regular, ferrocene-like, sandwich structure. In the mixed-ring compound 3, C(5)Me(5) is centrally bound to beryllium and the eta(1)-C(5)Me(4)H ring bonds to the metal through the unique CH carbon atom. This is also the binding mode of the eta(1)-ring of 1. To analyze the nature of the bonding in these molecules, theoretical calculations at different levels of theory have been performed on compounds 2 and 3, and a comparison with the bonding in [Be(C(5)H(5))(2)] has been made. As for the latter molecule, energy differences between the eta5/eta5 and the eta5/eta1 structures of 2 are very small, being of the order of a few kcal mol(-1). Constrained space orbital variations (CSOV) calculations show that the covalent character in the bonding is larger for [Be(C(5)Me(5))(2)] than for [Be(C(5)H(5))(2)] due to larger charge delocalization and to increased polarizability of the C(5)Me(5) fragment.     

Transfer hydrogenation processes to mu(3)-alkylidyne groups on the organotitanium oxide [Ti(3)Cp*O(3)

The photochemical treatment of mu(3)-alkylidyne complexes [[TiCp*(mu-O)](3)(mu(3)-CR)] (R=H (1), Me (2), Cp*=eta(5)-C(5)Me(5)) with the amines (2,6-Me(2)C(6)H(3))NH(2), Et(2)NH, and Ph(2)NH and the imine Ph(2)C=NH leads to the partial hydrogenation of the alkylidyne moiety that is supported on the organometallic oxide, [Ti(3)Cp*O(3)], and the formation of new oxoderivatives [[TiCp*(3)(mu-CHR)(R'NR")] (R"=2,6-Me(2)C(6)H(3), R'=H, R=H (3), Me (4); R'=R"=Et, R=H (5), Me (6); R'=R"=Ph, R=H (7), Me (8)) and [[TiCp*(mu-O)](3)(mu-CHR)(N=CPh(2))] (R=H (9), R=Me (10)), respectively. A sequential transfer hydrogenation process occurs when complex 1 is treated with tBuNH(2), which initially gives the mu-methylene [[TiCp*(mu-O)](3)(mu-CH(2))(HNtBu)] (11) complex and finally, the alkyl derivative [[TiCp*(mu-O)](3)(mu-NtBu)Me] (12). Furthermore, irradiation of solutions of the mu(3)-alkylidyne complexes 1 or 2 in the presence of diamines o-C(6)H(4)(NH(2))(2) and H(2)NCH(2)CH(2)NH(2) (en) affords [[TiCp*(mu-O)](3)(mu(3)-eta(2)-NC(6)H(4)NH)] (13) and [[TiCp*(mu-O)](3)(mu(3)-eta(2)-NC(2)H(4)NH)] (14) by either methane or ethane elimination, respectively. In the reaction of 1 with en, an intermediate complex [[TiCp*(mu-O)](3)(mu-CH(2))(NHCH(2)CH(2)NH(2))] (15) is detected by (1)H NMR spectroscopy. Thermal treatment of the complexes 4-10 quantitatively regenerates the starting mu(3)-alkylidyne compounds and the amine R'(2)NH or the imine Ph(2)C=NH; however, heating of solutions of 3 or 4 in [D(6)]benzene or a equimolecular mixture of both at 170 degrees C produces methane, ethane, or both, and the complex [[TiCp*(mu-O)](3)[mu(3)-eta(2)-NC(6)H(3)(Me)CH(2)]] (16). The molecular structure of 8 has been established by single-crystal X-ray analysis.     

Synthesis of novel 1-(2,3-dihydro-5H-4,1-benzoxathiepin-3-yl)-uracil and -thymine, and their corresponding S-oxidized derivatives

On the basis of molecular variations on isosteric replacements from the prototype 1-(2,3-dihydro-5H-1,4-benzodioxepin-3-yl)-5-fluorouracil a series of 3-(2,3-dihydro-5H-4,1-benzoxathiepin-3-yl)-uracil or -thymine O,N-acetals was prepared. The nature of the cis- and trans-sulfoxide isomers was established by means of their conformational analyses carried out with Sybyl and after comparing the theoretical results with the ¹H NMR responses of the target molecules. (RS)-3-(1,1-Dioxo-2,3-dihydro-5H-4,1-benzoxathiepin-3-yl)thymine and (1S*,3S*)-1-(1-oxo-3,5-dihydro-2H-4,1-benzoxathiepin-3-yl)thymine were found to be inhibitors of the MCF-7 cell growth.     

Changes in the reactivity of the fluorescent reagents carbazole-9-carbonyl chloride and 9-carbazolylacetic acid in the presence of cyclodextrins

Carbazole-9-carbonyl chloride (C9CC) and 9-carbazolylacetic acid (9CAA) were selected as model fluorescent reagents. The effect of different chemically modified cyclodextrins (CDs) added to the aqueous solutions of these reagents was studied in water and in buffered aqueous solutions at pH 4.5 and 8.8. The CDs employed were 2-hydroxypropyl-β-cyclodextrin (HP-βCD), 2,3-di-O-methyl-β-cyclodextrin (DM-βCD) and 2,3,6-tri-O-methyl-β-cyclodextrin (TM-βCD). The inclusion of these reagents inside the cavities of the CDs was verified and this process can affect the derivatization reaction because CDs can modify the reactivity of the guest molecules. The basic conditions necessary for the derivatization reaction between C9CC and amines lead to the formation of carbazole anion through hydrolysis followed by decarboxylation. In the presence of CDs, the hydrolysis-decarboxylation of carbazole-9-carbonyl chloride is faster than in buffered aqueous homogeneous solutions. The behaviour observed for these reagents in aqueous solutions of CDs was compared to the one observed in basic ethanolic solutions. These changes are particularly noticeable in the case of 2,3-di-O-methyl-β-CD and 2-hydroxypropyl-β-CD. The characteristics of the fluorescent reagents are compared to carbazole and 9-methylcarbazole as model compounds. This paper was presented at XIIIth International Cyclodextrin Symposium. Torino, Italy, May 14–17, 2006.     

Improvement of plant parameters of the ROBO gamma irradiation facility due to design modification

Two industrial scale, “ROBO” type ⁶⁰Co gamma irradiation facilities have recently been put into operation in Syria and Peru, and the dosimetry commissioning of both plants have been carried out to determine dose distribution within products and to calculate plant parameters such as efficiency, dose uniformity ratio and throughput. There are some design modifications between the two plants in connection with the location of the carriers with respect to the source plaque and also to each other. The effect of these construction modifications on the plant parameters is discussed in the analysis of the dose distribution data measured in the carriers with depth and height among the four irradiation rows on both sides of the source plaque. The plant parameters were also calculated for different product densities using the technical data of the facilities, and the calculated and measured results were compared to each other.     

Sequential injection system with higher dimensional electrochemical sensor signals Part 1. Voltammetric e-tongue for the determination of oxidizable compounds

A sequential injection analysis (SIA) system was developed with the aim of obtaining an automatic and versatile way to prepare standards needed in the study of systems with higher dimensional sensor signals. To illustrate this, different analytical techniques were used in determinations of several analytes. Automated potentiometric calibrations of different potentiometric sensors, with and without interference, were carried out. Useful determinations of selectivity coefficients with two degrees of freedom were obtained. Simultaneous voltammetric determinations have also been done. Firstly, simultaneous determinations of lead and cadmium, using epoxy-graphite composite as the working electrode, have enabled a separate calibration for each metal to be obtained. Next, a voltammetric electronic tongue was designed and applied to the determination of oxidizable species. The use of artificial neural networks has solved the overlapped signal of ascorbic acid, 4-aminophenol and 4-acetamidophenol (paracetamol). A set of 63 data points was prepared automatically and has facilitated the training of an electronic tongue for these three analytes. Accurate predictions of test solutions, in the range of 12–410 μM for ascorbic acid, 17–530 μM for 4-aminophenol and 10–420 μM for paracetamol, have been achieved with RMSEs lower than 0.10 μM.     

Crystal Structures of Twisted Di(2-Pyridyl)ketone and Planar Azo-di(2-Pyridine) and Their Discussion Based on PM3 Enthalpy Hypersurfaces for the Isoelectronic Molecules

Single crystal structure determinations prove the two pyridine substituents in di(2-pyridyl)ketone (H₄C₄NC)₂C=O to be twisted out of the carbonyl skeleton plane by torsion angles (OCCN) of 41° and –163°, in contrast to their planar arrangement in azo-di(2-pyridine) H₄C₄NC)-N=N-(CNC₄H₄). In order to rationalize the surprising difference between the two isoelectronic molecules, approximate PM3 enthalpy of formation hypersurfaces have been calculated for each of the two ring torsions, which are assumed to be the dominant ones among the 3N – 6 = 60 degrees of freedom. For both the ketone and the azo derivative, global minima are calculated, the torsion angles of which deviate from the crystal structure results, and, therefore, support the assumption that both the experimentally determined twisting of di(2-pyridyl)ketone as well as the flattening of azo-di(2-pyridine) might be affected by the crystal packing.     

Quantitative determination of formic acid in apple juices by H NMR spectrometry

A quantitative determination method of formic acid in apple juices is proposed by means of the proton nuclear magnetic resonance (¹H NMR) technique. Formic acid gives a singlet signal at the 8.2-8.4 ppm interval of the spectrum, and its area is used to determine the concentration of the acid. 1,3,5-Benzenetricarboxylic acid is added to the juice as an internal standard. Since the chemical shift of both species varies with the pH, ascorbic acid is also added to adjust it at 2.74 and to avoid the overlapping of the signals. Recoveries between 95 and 109% are obtained when the standard addition method is applied to the juices of five different cider apple varieties. The coefficient of variation obtained is 3.9% for intra-day repeatability (n = 5), and 4.6% for inter-day repeatability (n = 10). The limit of detection is 1.49 mg/l, calculated from “3S_y/x + intercept”. The described method is direct and no previous derivatization is needed.     

Pentanuclear Ba(II) complex of a macrocyclic ligand

We report here the first pentanuclear Ba(II) complex of a new tri-aza, tri-oxa macrocycle with two carboxymethyl "arms" pending from two N atoms, H2L2. The crystal structure corresponds to the formula [Ba5(H0.375L2)4(ClO4)(CH3CH2OH)(H2O)2](ClO4)2.5 x 9.5H2O and reveals the presence of four molecules of the ligand surrounding five Ba(II) ions, giving rise to an unusual structure with the metal ions inside a spherical organic cavity.