Short time deposition of TiO2 nanoparticles on SiC as photocatalysts for the degradation of organic dyes

The deposition of TiO₂ nanoparticles on SiC was carried out by mechanical milling under different conditions. SiC–TiO₂ samples were used as photocatalysts for the degradation of organic dyes such as methylene blue and rhodamine B. A short time deposition of TiO₂ nanoparticles was observed during mechanical milling (2 min at 200 rpm) to cover the SiC particles. The presence of SiC and TiO₂ (anatase and rutile) was confirmed by means of X-ray diffraction after thermal treatment at 450 °C. The deposition of TiO₂ on SiC was corroborated by scanning electron microscopy analysis; the thickness of the thin layer of TiO₂ deposited on SiC increases as the proportion of TiO₂ increases. The energy band gap values obtained for these compounds were around 3.0 eV. SiC–TiO₂ photocatalysts prepared by mechanical milling exhibited better activity under UV-light irradiation for the degradation of methylene blue and rhodamine B than commercial TiO₂ powder (titania P25).     

Carbocyclic Ring Closure of an Aminodeoxy HEX-5-Enopyranoside

Ferrier's intramolecular carbocyclic ring closure reaction of methyl 3,4-di-O-acetyl-2-benzoyl-amino-2,6-dideoxy-α-O-xylo-hex-5-enopyranoside (2) led to 2L-2,4,513-2,3-di-O-acetyl-4-benzoylamino-5-hydroxy-cyclohexanone (4). Upon acetylation compound 4 underwent B-elimination to give the conjugated enone 5. The convenient preparation of these highly functionalized aminocyclohexanones offers an efficient route to monoamino- or 1,4-diaminocyclitol-type aminoglycoside antibiotic aglycones, starting from 2-amino-2-deoxy-O-glucose.     

Heptametallic,Octupolar Nonlinear Optical Chromophores with Six Ferrocenyl Substituents

New complexes with six ferrocenyl (Fc) groups connected to Zn^II or Cd^II tris(2,2′‐bipyridyl) cores are described. A thorough characterisation of their BPh₄^? salts includes two single‐crystal X‐ray structures, highly unusual for such species with multiple, extended substituents. Intense, visible d(Fe^II)→π* metal‐to‐ligand charge‐transfer (MLCT) bands accompany the π→π* intraligand charge‐transfer absorptions in the near UV region. Each complex shows a single, fully reversible Fe^III/II wave when probed electrochemically. Molecular quadratic nonlinear optical (NLO) responses are determined by using hyper‐Rayleigh scattering and Stark spectroscopy. The latter gives static first hyperpolarisabilities β₀ reaching as high as approximately 10^?27 esu and generally increasing with π‐conjugation extension. Z‐scan cubic NLO measurements reveal high two‐photon absorption cross‐sections σ₂ of up to 5400 GM in one case. DFT calculations reproduce the π‐conjugation dependence of β₀, and TD‐DFT predicts three transitions close in energy contributing to the MLCT bands. The lowest energy transition has octupolar character, whereas the other two are degenerate and dipolar in nature.     

Assembling a Phthalocyanine and Perylenediimide Donor–Acceptor Hybrid through a Platinum(II) Diacetylide Linker

In a novel electron‐donor–acceptor conjugate, phthalocyanine (Pc) and perylenediimide (PDI) are connected through a trans‐platinum(II) diacetylide linker to yield Pc‐Pt‐PDI 1 . In the ground state, the presence of Pt^II disrupts the electronic communication between the two electroactive components, as revealed by UV/Vis spectroscopy and electrochemical studies. The photophysical behavior of 1 is compared with that of the corresponding Pc‐PDI electron‐donor–acceptor conjugate 2 in terms of charge separation and charge recombination. The insertion of Pt^II between Pc and PDI impacts the results in a longer‐lived Pc ^{. +}/PDI ^{. ?} radical ion‐pair state. In addition, the intermediately formed Pc triplet excited state is formed with higher quantum yields in 1 than in 2 .     

Structural Diversity from the Transannular Cyclizations of Natural Germacrone and Epoxy Derivatives: A Theoretical–Experimental Study

Treatment of germacrone ( 1 ) with different electrophiles, and of its epoxy derivatives germacrone‐4,5‐epoxide ( 2 ), germacrone‐1,10‐epoxide ( 3 ) and isogermacrone‐4,5‐epoxide ( 4 ) with Brönsted/Lewis acids and Ti^III, gives rise to a great structural diversity. Thus, by using a maximum of two steps, the production of more than 40 compounds corresponding to 14 skeletons is described. Computational calculations rationalizing the structural divergence produced are also described. Finally, since some of the compounds generated are bioactive natural sesquiterpenes, the mechanisms of formation of these substances will provide new insights in their biosynthesis.     

Epoxide Opening versus Silica Condensation during Sol–Gel Hybrid Biomaterial Synthesis

Hybrid organic–inorganic solids represent an important class of engineering materials, usually prepared by sol–gel processes by cross‐reaction between organic and inorganic precursors. The choice of the two components and control of the reaction conditions (especially pH value) allow the synthesis of hybrid materials with novel properties and functionalities. 3‐Glycidoxypropyltrimethoxysilane (GPTMS) is one of the most commonly used organic silanes for hybrid‐material fabrication. Herein, the reactivity of GPTMS in water at different pH values (pH 2–11) was deeply investigated for the first time by solution‐state multinuclear NMR spectroscopic and mass spectrometric analysis. The extent of the different and competing reactions that take place as a function of the pH value was elucidated. The NMR spectroscopic and mass spectrometric data clearly indicate that the pH value determines the kinetics of epoxide hydrolysis versus silicon condensation. Under slighly acidic conditions, the epoxy‐ring hydrolysis is kinetically more favourable than the formation of the silica network. In contrast, under basic conditions, silicon condensation is the main reaction that takes place. Full characterisation of the formed intermediates was carried out by using NMR spectroscopic and mass spectrometric analysis. These results indicate that strict control of the pH values allows tuning of the reactivity of the organic and inorganic moities, thus laying the foundations for the design and synthesis of sol–gel hybrid biomaterials with tuneable properties.     

Efficient Green‐Light‐Emitting Electrochemical Cells Based on Ionic Iridium Complexes with Sulfone‐Containing Cyclometalating Ligands

A new approach to obtain green‐emitting iridium(III) complexes is described. The synthetic approach consists of introducing a methylsulfone electron‐withdrawing substituent into a 4‐phenylpyrazole cyclometalating ligand in order to stabilize the highest‐occupied molecular orbital (HOMO). Six new complexes have been synthesized incorporating the conjugate base of 1‐(4‐(methylsulfonyl)phenyl)‐1 H‐pyrazole as the cyclometalating ligand. The complexes show green emission and very high photoluminescence quantum yields in both diluted and concentrated films. When used as the main active component in light‐emitting electrochemical cells (LECs), green electroluminance is observed. High efficiencies and luminances are obtained at low driving voltages. This approach for green emitters is an alternative to the widely used fluorine‐based substituents in the cyclometalating ligands and opens new design possibilities for the synthesis of green emitters for LECs.     

Self‐Assembled Tetragonal Prismatic Molecular Cage Highly Selective for Anionic π Guests

The metal‐directed supramolecular synthetic approach has paved the way for the development of functional nanosized molecules. In this work, we report the preparation of the new nanocapsule 3? (CF₃SO₃)₈ with a A₄B₂ tetragonal prismatic geometry, where A corresponds to the dipalladium hexaazamacrocyclic complex Pd‐1 , and B corresponds to the tetraanionic form of palladium 5,10,15,20‐tetrakis(4‐carboxyphenyl)porphyrin ( 2 ). The large void space of the inner cavity and the supramolecular affinity for guest molecules towards porphyrin‐based hosts converts this nanoscale molecular 3D structure into a good candidate for host–guest chemistry. The interaction between this nanocage and different guest molecules has been studied by means of NMR, UV/Vis, ESI‐MS, and DOSY experiments, from which highly selective molecular recognition has been found for anionic, planar‐shaped π guests with association constants (K_a) higher than 10⁹ M ^?1, in front of non‐interacting aromatic neutral or cationic substrates. DFT theoretical calculations provided insights to further understand this strong interaction. Nanocage 3? (CF₃SO₃)₈ can not only strongly host one single molecule of M(dithiolene)₂ complexes (M=Au, Pt, Pd, and Ni), but also can finely tune their optical and redox properties. The very simple synthesis of both the supramolecular cage and the building blocks represents a step forward for the development of polyfunctional supramolecular nanovessels, which offer multiple applications as sensors or nanoreactors.     

Enzyme‐Responsive Silica Mesoporous Supports Capped with Azopyridinium Salts for Controlled Delivery Applications

The preparation of a new capped silica mesoporous material, Rh‐Azo‐S , for on‐command delivery applications in the presence of target enzymes is described. The material consists of nanometric mesoporous MCM‐41‐like supports loaded with Rhodamine B and capped with an azopyridine derivative. The material was designed to show “zero delivery” and to display a cargo release in the presence of reductases and esterases, which are usually present in the colon, mainly due to intestinal microflora. The opening and cargo release of Rh‐Azo‐S in vitro studies were assessed and seen to occur in the presence of these enzymes, whereas no delivery was noted in the presence of pepsine. Moreover, Rh‐Azo‐S nanoparticles were used to study controlled Rhodamine B dye delivery in intracellular media. HeLa cells were employed for testing the “non”‐toxicity of nanoparticles. Moreover, delivery of the dye in these cells, through internalization and enzyme‐mediated gate opening, was confirmed by confocal microscopy. Furthermore, the nanoparticles capped with the Azo group and loaded with a cytotoxic camptothecin ( CPT ) were also prepared (solid CPT‐Azo‐S ) and used as delivery nanodevices in HeLa cells. When this solid was employed, the cell viability decreased significantly due to internalization of the nanoparticles and delivery of the cytotoxic agent.     

[Pd(Fmes)2(tmeda)]: A Case of Intermittent C?H⋅⋅⋅F?C Hydrogen‐Bond Interaction in Solution

The X‐ray structure of the title compound [Pd(Fmes)₂(tmeda)] (Fmes=2,4,6‐tris(trifluoromethyl)phenyl; tmeda=N,N,N′,N′‐tetramethylethylenediamine) shows the existence of uncommon C? H???F? C hydrogen‐bond interactions between methyl groups of the TMEDA ligand and ortho‐CF₃ groups of the Fmes ligand. The ¹⁹F NMR spectra in CD₂Cl₂ at very low temperature (157 K) detect restricted rotation for the two ortho‐CF₃ groups involved in hydrogen bonding, which might suggest that the hydrogen bond is responsible for this hindrance to rotation. However, a theoretical study of the hydrogen‐bond energy shows that it is too weak (about 7 kJ mol^?1) to account for the rotational barrier observed (ΔH^≠=26.8 kJ mol^?1), and it is the steric hindrance associated with the puckering of the TMEDA ligand that should be held responsible for most of the rotational barrier. At higher temperatures the rotation becomes fast, which requires that the hydrogen bond is continuously being split up and restored and exists only intermittently, following the pulse of the conformational changes of TMEDA.