A novel one-pot method for the preparation of pyrazoles by 1,3-dipolar cycloadditions of diazo compounds generated in situ

A convenient one-pot procedure for the preparation of pyrazoles by 1,3-dipolar cycloaddition of diazo compounds generated in situ has been developed. Diazo compounds derived from aldehydes were reacted with terminal alkynes to furnish regioselectively 3,5-disubstituted pyrazoles. Furthermore, the reaction of N-vinylimidazole and diazo compounds derived from aldehydes gave exclusively 3-substituted pyrazoles in a one-pot process.     

Determination of dopamine in synthetic cerebrospinal fluid by SWV with a graphite–polyurethane composite electrode

This work describes an electroanalytical investigation of dopamine using cyclic voltammetry (CV) and the graphite–polyurethane composite electrode (GPU). In CV studies, well-defined redox peaks characterize the oxidation process at the GPU electrode, which is indicative of electrocatalytic effects associated with active sites on the GPU electrode surface. A new analytical methodology was developed using the GPU electrode and square wave voltammetry (SWV) in BR buffer solution (0.1 mol L^–1; pH 7.4). Analytical curves were constructed under optimized conditions (f=60s^–1, E_a=50 mV, E_I=2 mV) and detection and quantification limits of 6.4×10^–8 mol L^–1 (12.1 g L^–1) and 5.2×10^–6 mol L^–1 (0.9 mg L^–1), respectively, were achieved. The precision of the method was checked by performing ten successive measurements for a 9.9×10^–6 mol L^–1 dopamine solution. For intra-assay and inter-assay precisions, the relative standard deviations were 1.9 and 2.3%, respectively. In order to evaluate the developed methodology, the determination of dopamine was performed with good sensitivity and selectivity, without the interference of ascorbic acid in synthetic cerebrospinal fluid, which indicates that the new methodology enables reliable analysis of dopamine.     

A new approach for fluorine determination by solid sampling graphite furnace molecular absorption spectrometry

This work deals with the determination of fluorine by solid sampling graphite furnace molecular absorption spectrometry. The molecular absorbance of aluminum monofluoride (AlF), which is produced in the vapor phase in the presence of Al³⁺, is measured at 227.5 nm, a non-resonant platinum line. A conventional graphite furnace program has been used with pyrolysis and vaporization temperatures of 800 and 2300 °C, respectively. Solutions of Ba²⁺ and Al³⁺ have been used to avoid fluorine losses during the pyrolysis stage and to produce AlF in the vaporization stage, respectively. Certified coal and alumina samples were analyzed using aqueous standards for calibration. The agreement between the found concentration and the certified value, or the value obtained by another method ranged from 92 to 105%, with a relative standard deviation less than 8.5%. The limit of detection and the characteristic mass was 0.17 μg g^− 1 and 205 pg, respectively.     

MECHANISM OF PHOTOREDUCTION OF THIAZINE DYES BY EDTA STUDIED BY FLASH PHOTOLYSIS-II. pH DEPENDENCE OF ELECTRON ABSTRACTION RATE CONSTANT OF THE DYES IN THEIR TRIPLET STATE

Abstract— The pH dependence of the apparent reactivity of thiazine dyes in their triplet states has been studied in aqueous solutions, using as electron donor HY^-3, the trianionic species of ethylene diamine tetraacetic acid (EDTA), in the pH range 4–8. The pH dependence is found to be related to a change in the degree of protonation of the triplet excited dye. The apparent reactivity and lifetime of two differently protonated forms of thionine, azur B and methylene blue were determined by classical and dye-laser flash techniques, making it possible to evaluate the rate constant for electron abstraction of these molecules in their triplet states. It is found that: (a) protonation on the ring nitrogen increases the electron-abstraction rate constant of the triplet-state species about twenty-fold, and (b) methylation on the side amino groups decreases it.     

Surface structure of γ-Alumina-Supported Ruthenium Catalysts for ammonia synthesis

Ruthenium supported catalysts were prepared by impregnation of RuCl₃ · 3 H₂O and K₄[Ru(CN)₆] · 3 H₂O aqueous acetone solutions upon several acid(base)-modified γ-Al₂O₃ samples. Characterization of the catalysts was carried out by CO chemisorption and kinetics of hydrogen reduction, correlating the particle size and dispersion of the metallic phase with the previous acid modification of the γ-Al₂O₃, as well as with the type of precursor and solvent used. The surface properties were also correlated with their catalytic activities for ammonia synthesis at atmospheric pressure and 583 K (N₂/H₂ ? 1/3).     

Electroviscous Forces on a Charged Cylinder Moving Near a Charged Wall

The refined theory of the electroviscous lift forces is presented for the case when the separation distance between the particle and the wall is larger than the double-layer thickness. The theory is based on the lubrication approximation for motion of a long cylinder near a solid wall in creeping flow. The approximate analytical formula for the lift force valid for Pe相似文献   

Complexes of divalent nickel and copper with the Schiff base derived from 2-(2-aminophenyl)benzimidazole and benzaldehyde

Summary The reactions of divalent nickel and copper salts with the Schiff base derived from 2-(2-aminophenyl)benzimidazole and benzaldehyde, L, yield complexes of general formulae [CuL₂X₂] (X=Cl, Br, or ClO₄), [CuL(SO₄)], [CuL(SO₄)] · 4H₂O, and NiLX₂ (X=Cl, Br, or NCS).All the complexes have been characterized by elemental analyses, magnetic measurements, e.s.r. electronic and i.r. spectral studies. The results show that the Schiff base acts as bidentate ligand through the pyridine-like imine nitrogen of imidazole ring and the azomethine nitrogen. Tentative structures of the complexes are suggested.     

Luminescence temperature antiquenching of water-soluble CdTe quantum dots: role of the solvent

Luminescence temperature antiquenching (LTAQ) is observed for water-soluble CdTe quantum dots (QDs) capped with aminoethanethiol (AET). The efficient exciton emission (quantum efficiency of approximately 40% at 300 K) is quenched almost completely as the QD solutions are cooled to below 230 K and is fully recovered around 270 K upon warming up to room temperature (LTAQ). Temperature-dependent lifetime measurements show that the quenching rate is high, resulting in an on/off behavior. No LTAQ is observed for CdTe QDs capped with aminoundecanethiol (AUT). The LTAQ is explained by the influence of solvent freezing on the surface of the QD core. Freezing of the solvation water molecules surrounding the QD will induce strain in the capping shell, due to the interaction between water and the charged heads of the capping molecules. Short carbon chains (AET) will propagate the strain to the QD surface, creating surface quenching states, whereas long and flexible chains (AUT) will dissipate the strain, thus avoiding surface distortion. Freezing-point depression by the addition of methanol results in a lowering of the transition temperature. Additional support is provided by the size dependence of the LTAQ: smaller particles, with higher local ionic strength due to a higher density of charged NH(3)(+) surface groups, experience a lower transition temperature due to stronger local freezing-point depression.     

Excitation functions for (α,xn) reactions on107Ag and109Ag

Excitation functions have been measured for yields of In isotopes in the reactions¹⁰⁷Ag(, xn)^111–xIn and¹⁰⁹Ag(, xn)^113–xIn for x=1–5. The alpha particle bombardment of natural silver, the stacked foil technique for irradiation and semiconductor gamma-spectrometry for measurements were used.This work has been sponsored by the Subsecretaría de Ciencia y Tecnología, Argentina.     

Equilibrium of the reaction between dissolved sodium sulfide and biologically produced sulfur

The equilibrium of the heterogeneous reaction between dissolved sodium sulfide and biologically produced sulfur particles has been studied. Biologically produced sulfur was obtained from a bioreactor of a hydrogen sulfide removal process in which the dominating organism is Thiobacillus sp. W5. Detailed knowledge of this reaction is essential to understand its effect on the process. The results were compared with the equilibrium of the reaction of sulfide with ‘inorganic’ elemental sulfur. The equilibrium between dissolved sodium sulfide and biologically produced sulfur particles can be described by an equilibrium constant, K_x, which consists of a weighted sum of constants for polysulfide ions of different chain length, rather than a true single equilibrium constant. For biologically produced sulfur pK_x = 9.10 ± 0.08 (21 °C) and 9.17 ± 0.09 (35 °C) with an average polysulfide chain length x = 4.91 ± 0.32 (21 °C) and 4.59 ± 0.31 (35 °C). The pK_x value for biologically produced sulfur is significantly higher than for reaction of dissolved sodium sulfide with inorganic sulfur (pK_x = 8.82; 21 °C). This difference is probably caused by the negatively charged polymeric organic layer, which is present on biologically produced sulfur but absent with “inorganic” sulfur. Specific binding of polysulfide ions to the organic layer results in a higher polysulfide concentration at the reaction site compared to the bulk concentration. This results in an apparent decrease of the measured equilibrium constant, K_x.