Determination of anthocyanins in wine based on flow-injection, liquid--solid extraction, continuous evaporation and high-performance liquid chromatography--photometric detection

A continuous method, easy to automate, for the determination of anthocyanins in wine based on the coupling of continuous liquid–solid extraction, evaporation, HPLC individual separation and photometric detection is proposed. The target analytes are removed from the wine in a continuous fashion using a C₁₈ minicolumn and eluted with an aqueous solution (pH 2) with 16% acetonitrile. The eluted fraction is concentrated by solvent evaporation assisted by heat and dragging off the vapour using a flow of N₂. For in-line preconcentration, a continuous evaporation module was designed and located in the manifold between the solid-phase minicolumn and the injection valve of the chromatograph. In this way, injection of the sample into the dynamic system leads the plug through it for liquid–solid extraction of the anthocyanins, partial evaporation of the eluent (with a preconcentration factor as required) and transport to the high-pressure injection valve of the chromatograph, where individual separation and subsequent photometric detection take place. The method thus developed for the determination of malvidin-3-glucoside, cyanidin-3-glucoside and peonidin-3-glucoside anthocyanins in Spanish red wines is more sensitive than the batch manual method based on the same steps, has better linearity of the calibrations curves with lower detection limits and much wider determination range for the most abundant anthocyanins in wine. In addition, the method can be fully automated with low acquisition and maintenance costs.     

Derivatization procedures for the detection of beta(2)-agonists by gas chromatographic/mass spectrometric analysis

An evaluation of derivatization procedures for the detection of beta(2)-agonists is presented. The study was performed with the beta(2)-agonists bambuterol, clenbuterol, fenoterol, formoterol, salbutamol, salmeterol and terbutaline. Different derivatizating agents were employed, aiming to obtain derivatives with high selectivity to be used in the gas chromatographic/mass spectrometric analysis of beta(2)-agonists in biological samples. Trimethylsilylation was compared with different agents and the role of some catalysts was evaluated. Acylation, combined trimethylsilylation and acylation, and the formation of cyclic methylboronates were also studied. Sterical hindrance caused by different substituents at the nitrogen atom of the beta-ethanolamine lateral chain of beta(2)-agonist molecules is mainly responsible for differences in the abundances of the derivatives obtained. The use of catalysts produces an increase in the derivatization yield, especially for compounds with low steric hindrance (substituents with primary and secondary carbon atoms). The formation of trimethylsilyl (TMS) ethers is not influenced by structural molecular differences when only hydroxy groups are involved in derivatization. Combined trimethylsilylation and acylation showed that compounds with a secondary carbon atom linked to the nitrogen atom form mainly N-TFA-O-TMS derivatives, with a small amount of N-TMS-O-TMS derivatives. Compounds with tert-butyl substituents at the amino group (bambuterol, salbutamol and terbutaline) formed O-TMS derivatives as the main products, although a limited amount of trifluoroacylation at the nitrogen atom also occurred. Cyclic methylboronates were formed with bambuterol, clenbuterol, formoterol, salbutamol and salmeterol. Owing to hydroxy substituents in unsuitable positions for ring formation, this procedure was not effective for fenoterol and terbutaline. Mass spectra of different derivatives and tentative fragmentation profiles are also shown. For screening purpose (e.g. sports drug testing), derivatization with MSTFA or BSTFA alone is recommended as a comprehensive derivatization technique for beta(2)-agonists owing to minimal by-product formation; formation of cyclic methylboronates can be useful for confirmation purposes. Detection limits were obtained for the TMS and cyclic methylboronate derivatives using the derivatizing reagents MSTFA and trimethylboroxine, respectively. For most of the compounds, lower detection limits were found for the TMS derivatives.     

Thermogravimetric and differential scanning calorimetric investigations of manganese–glycine interactions

Thermogravimetric (t.g.) and differential scanning calorimetric (d.s.c.) data have been used to study metal–amino acid interactions in adducts of general formula MnCl₂ · ngly (gly = glycine, n = 0.7, 2.0, 4.0 and 5.0). All the prepared adducts exhibit only a one step mass loss associated with the release of glycine molecules, except for the 0.7gly adduct, which exhibits two glycine mass loss steps. From d.s.c. data, the enthalpy values associated with the glycine mass loss can be calculated: MnCl₂ · 0.7gly = 409 and 399 kJ mol^–1, MnCl₂ · 2.0gly = 216 kJ mol^–1, MnCl₂ · 4.0gly = 326 kJ mol^–1 and MnCl₂ · 5.0gly = 423 kJ mol^–1, respectively. The enthalpy associated with the ligand loss, plotted as function of the number of ligands for the n = 2.0, 4.0 and 5.0 adducts, gave a linear correlation, fitting the equation: H (ligand loss)/kJ mol^–1 = 67 × (number of ligands, n) + 76. A similar result was achieved when the enthalpy associated with the ligand loss was plotted as a function of the _a(COO^–) bands associated with the coordination through the carboxylate group, 1571, 1575 and 1577 cm^–1, respectively, for the n = 2.0, 4.0 and 5.0 adducts, giving the equation H (ligand loss) /kJ mol^–1 = 33.5 × _a(COO^–) /cm^–1 – 52418.5. This simple equation provides evidence for the enthalpy associated with the ligand loss being very closely related to the electronic density associated with the metal–amino acid bonds.     

The complexation of 2,3-anthracenedicarboxylate by β- and γ-cyclodextrins in mixed solvent systems as studied by induced circular dichroism. The role of cosolvent hydrophobicity

The complexation of 2,3-anthracenedicarboxylate (ADC) by- and-cyclodextrins in water containing an organic solvent has been studied by induced circular dichroism. It has been shown that an increase of organic solvent ratio causes the degradation of the 1:1 ADC:-CD complex and the liberation of one guest molecule from the 2:1 ADC:-CD complex in water. The higher the hydrophobicity of the cosolvent, the weaker the complexation of ADC by-CD.     

Deactivation of silica surfaces with a silanol-terminated polysiloxane; structural sharacterization by inverse gas chromatography and solid-state NMR

Retention gape deactivated with Silicone OV-1701-OH show good chromatographic performance and remarkable stability against water induced stationary phase degradrdation. In an attempt to better understand the findamentals off the deactivation process using silanol terminated polysiloxanes, a fumed silica was deactivated with Silicon OV-1701-OH. In contrast to fused silic capillaries, fumed silica (Aerosil A-200) can be studied by ²⁹Si cross-polarization magic-angle-spinning (CPMAS) NMR, thus serving as a model substrate for fused silica. Retention data from inverse gas chromatography at infinite dilurion and ²⁹Si CP MAS NMR data of five Aerosil phases, differing in residual silanol surface concentration, are correlated with the aim of validating this approach for stationary phase characterization. A comparatively detailed model of the deactivating polymer layer that explains the observed absorption activities is deduced. Surface silanols are shown to play a key role in the polymer layer, the structure of which is of primary importance for the absorption behavior after deactivation. Contrary to common belief, the absolute silanol surface concentration after deativation is only of secondary importance for the overall absorption activity. High silanol surface concentrations enhance degradation of the polysiloxane chains into small cyclic fragments as well as subsequent absorption and immobolization to the silica substrate surface. The mobility of linear polysiloxane chains in the kHz regime (as determined bby NMR cross-polarization dynamics) appears to determine the extent which the residual silanols are accessible for analytes. It is therefore anticipated that there is an optimum silanol surface concentration of fused silica surfaces to be deactivated with silanol terminated polysiloxanes; it should be lazrge enough to adsord polymer fragments, but not large to avoid excessive residual silanol activity.     

Surface modification of γ-alumina membranes by silane coupling for CO2 separation

Top layers of γ-Al₂O₃ composite membranes have been modified by the silane coupling technique using phenyltriethoxysilane for improving the separation factor of CO₂ to N₂. The separation efficiency of the modified membranes was strongly dependent upon the hydroxylation tendency of the support materials and the amount of the special functional group (i.e. phenyl radical) which was coupled onto a top layer. The separation factor through the TiO₂ supported γ-Al₂O₃ membrane was found to be fairly enhanced by silane coupling, but in case of the -Al₂O₃ supported membrane was not. The CO₂/N₂ separation factor through the modified γ-Al₂O₃/TiO₂ composite membrane is 1.7 at 90°C and ΔP = 2 × 10⁵ Pa for the binary mixture containing 50 vol% CO₂. The separation factor is proportional to the CO₂ concentration in the gas mixture, and the modified membrane is stable up to 100°C. The main mechanism of the CO₂ transport through the modified γ-Al₂O₃ layer is known to be a surface diffusion.     

Flow-through sensor based on derivative synchronous fluorescence spectrometry for the simultaneous determination of pyrene,benzo(e)pyrene and benzo(ghi)perylene in water

A flow-through/first derivative synchronous spectrofluorimetric sensor for the determination of PAH has been described. This sensor has been used for the simultaneous determination of PAH mixtures (pyrene, benzo(e)pyrene and benzo(ghi)perylene). Linear calibration ranges between 10 and 500 ng/ml with acceptable precision (repeatability, expressed as relative standard deviation, smaller than 4.6%, and sampling frequency of 12 h(-1)) have been obtained. The method has been applied to the determination of the target analytes in spiked water samples with excellent results (recoveries between 94 and 108%).     

Diastereoselective synthesis of cularine alkaloids via enium ions and an easy entry to isoquinolines by aza-Wittig electrocyclic ring closure

In preliminary communications, we reported the diastereoselective synthesis of cularine and sarcocapnine via the intramolecular ring closure of nitrenium and oxenium ions, a new highly diastereoselective reductive methylation with (+)-8-phenylmenthyl chloroacetate followed by reduction with sodium borohydride, and a facile entry to the isoquinoline precursors by aza-Wittig electrocyclic ring closure. We now report the full details of the syntheses of (+)-O-demethylcularine, (+)-cularine, (+)-sarcocapnidine, (+)-sarcocapnine, and (+)-crassifoline and describe different methods of synthesis of their precursors.