Mechanical properties and molecular mobility in oriented polyolefines

The static modulus of elasticity (E) and the correlation time of rotation ( _c ) of 2,-2,6,6-tetramethylpiperidine-1-oxyl are studied as a function of the temperature (210<T <350°K) for oriented films of isotactic polypropylene and polyethylene of high and low density.E and _c change both upon heating and polymer orientation; this result indicates that sample properties are influenced by the microstructure of the amorphous phase where probes are localized.     

Stable gaseous aziridinium ions

Gaseous protonated aziridine ions are produced at the threshold from β-phenoxyethylamine molecular ions. The evidence for this is collisional activation spectra, using various precursors (including labelled analogues) under electron impact and field ionization conditions. Partial conversion to the acyclic \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} {\rm CH = }\mathop {\rm N}\limits^ + {\rm H}_{\rm 2} $\end{document} isomer occurs at higher electron energies and is rationalized by means of a potential energy surface constructed from energetic data.     

Synthesis of N-tetrasubstituted cyclam derivatives appended with sulfonyl or sulfinyl groups via aza-Michael addition

Azamacrocycles bearing four arylsulfonyl or arylsulfinyl pendant arms have been synthesised with good yields through nucleophilic addition of 1,4,8,11-tetraazacyclotetradecane (cyclam) to phenylvinylsulfone, phenylvinylsulfoxide or (R)-tolylvinylsulfoxide in isopropanol/water media. The crystal structure of the tetraethylsulfonylphenyl substituted macrocycle has been determined by X-ray crystallography. Preliminary studies of the coordination properties of these functionalised macrocyles towards Cu(II) and Eu(III) indicate that pendant sulfoxide groups act as oxygen donor coordinating groups.     

The determination of starting conditions for modifier optimization in reversed-phase HPLC

Summary After a brief introduction of the subject, the paper focusses on the first step in any optimization procedure: the delineation of the parameter space, wherein the global optimum is to be found. For organic modifier optimization in reversed-phase liquid chromatography it is shown that the necessary information can be derived from a single water-methanol gradient. It first yields an estimate of the total number of solutes in the sample, which is vital to define the peak capacity needed to achieve separation at a certain confidence level. Next, the gradient allows the prediction of suitable isocratic methanol binary solvents, and transfer rules formulate the iso-eluotropic composition of the common binary solvents (tetrahydrofuran and acetonitrile). Because all predictions are based on a statistical analysis of a limited data base, attention is given to the practical situation where an actual sample deviates from the average solute behaviour. Such deviations are revealed in the first isocratic run and can be used to arrive at a better estimate of solute retention.     

Classical and quantum algebras of non-local charges in σ models

We investigate the algebras of the non-local charges and their generating functionals (the monodromy matrices) in classical and quantum non-linear models. In the case of the classical chiral models it turns out that there exists no definition of the Poisson bracket of two monodromy matrices satisfying antisymmetry and the Jacobi identity. Thus, the classical non-local charges do not generate a Lie algebra. In the case of the quantum O(N) non-linear model, we explicitly determine the conserved quantum monodromy operator from a factorization principle together withP,T, and O(N) invariance. We give closed expressions for its matrix elements between asymptotic states in terms of the known two-particleS-matrix. The quantumR-matrix of the model is found. The quantum non-local charges obey a quadratic Lie algebra governed by a Yang-Baxter equation.Laboratoire associé au CNRS No. LA 280     

A theorem on asymptotic expansion of Feynman amplitudes

For any Feynman amplitude, where any subset of invariants and/or squared masses is scaled by a real parameter going to zero or infinity, the existence of an expansion in powers of and ln is proved, and a method is given for determining such an expansion. This is shown quite generally in euclidean metric, whatever the external momenta (exceptional or not) and the internal masses (vanishing or not) may be, and for some simple cases in minkowskian metric, assuming only finiteness of the — eventually renormalized — amplitude before scaling. The method uses what is called Multiple Mellin representation, the validity of which is related to a generalized power-counting theorem.On leave of absence from University of Bahia (Brazil). Fellow of CAPES, Brazil     

Thermogravimetric and differential scanning calorimetric investigations of manganese–glycine interactions

Thermogravimetric (t.g.) and differential scanning calorimetric (d.s.c.) data have been used to study metal–amino acid interactions in adducts of general formula MnCl₂ · ngly (gly = glycine, n = 0.7, 2.0, 4.0 and 5.0). All the prepared adducts exhibit only a one step mass loss associated with the release of glycine molecules, except for the 0.7gly adduct, which exhibits two glycine mass loss steps. From d.s.c. data, the enthalpy values associated with the glycine mass loss can be calculated: MnCl₂ · 0.7gly = 409 and 399 kJ mol^–1, MnCl₂ · 2.0gly = 216 kJ mol^–1, MnCl₂ · 4.0gly = 326 kJ mol^–1 and MnCl₂ · 5.0gly = 423 kJ mol^–1, respectively. The enthalpy associated with the ligand loss, plotted as function of the number of ligands for the n = 2.0, 4.0 and 5.0 adducts, gave a linear correlation, fitting the equation: H (ligand loss)/kJ mol^–1 = 67 × (number of ligands, n) + 76. A similar result was achieved when the enthalpy associated with the ligand loss was plotted as a function of the _a(COO^–) bands associated with the coordination through the carboxylate group, 1571, 1575 and 1577 cm^–1, respectively, for the n = 2.0, 4.0 and 5.0 adducts, giving the equation H (ligand loss) /kJ mol^–1 = 33.5 × _a(COO^–) /cm^–1 – 52418.5. This simple equation provides evidence for the enthalpy associated with the ligand loss being very closely related to the electronic density associated with the metal–amino acid bonds.     

Synthesis,characterization and a thermogravimetric study of copper,cobalt and tin mono- and bis-adducts with ethyleneurea,ethylenethiourea and propyleneurea

This paper describes the synthesis, characterization and a thermogravimetric (t.g.) study of 11 adducts of general formula MCl₂·nL (M = Cu, Co and Sn; n = 1 and 2 for Sn, and 2 for Cu and Co; L = ethyleneurea eu, ethylenethiourea etu, and propyleneurea pu). The i.r. results shows that the eu and pu adducts are coordinated through oxygen, whereas for etu nitrogen is the coordination site. The (C=O) or (C=S) trend is: Cu > Co > Sn. The t.g. curves show that the adducts release ligand molecules in a single mass loss step. As regards considering adducts with the same stoichiometry, the observed thermal stability trend is: etu > pu > eu.     

Quantitative separation of zinc traces from cadmium matrices by solid-phase extraction with polyurethane foam

A system for separation of zinc traces from large amounts of cadmium is proposed in this paper. It is based on the solid-phase extraction of the zinc in the form of thiocyanate complexes by the polyurethane foam. The following parameters were studied: effect of pH and of the thiocyanate concentration on the zinc extraction, shaking time required for quantitative extraction, amount of PU foam necessary for complete extraction, conditions for the separation of zinc from cadmium, influence of other cations and anions on the zinc sorption by PU foam, and required conditions for back extraction of zinc from the PU foam. The results show that zinc traces can be separated from large amounts of cadmium at pH 3.0±0.50, with the range of thiocyanate concentration from 0.15 to 0.20 mol l⁻¹, and the shaking time of 5 min. The back extraction of zinc can be done by shaking it with water for 10 min. Calcium, barium, strontium, magnesium, aluminum, nickel and iron(II) are efficiently separated. Iron(III), copper(II) and cobalt(II) are extracted simultaneously with zinc, but the iron reduction with ascorbic acid and the use of citrate to mask copper(II) and cobalt(II) increase the selectivity of the zinc extraction. The anions nitrate, chloride, sulfate, acetate, thiosulphate, tartarate, oxalate, fluoride, citrate, and carbonate do not affect the zinc extraction. Phosphate and EDTA must be absent. The method proposed was applied to determine zinc in cadmium salts using 4-(2-pyridylazo)-resorcinol (PAR) as a spectrophotometric reagent. The result achieved did not show significant difference in the accuracy and precision (95% confidence level) with those obtained by ICP–AES analysis.     

Effect of polyvinylalcohols on the thermostability of lipase fromCandida rugosa

Lipase fromCandida rugosa was stabilized against thermal inactivation in the presence of polyvinylalcohols (PVA) of different molecular weights. The apparent rate constant of the lipase inactivation, k_d, at 49°C is 0.049/min and 0.022/min in the absence and in the presence of PVA (mol wt 22,000), respectively. The improvement of the lipase thermostability by adding PVA was confirmed by differential scanning calorimetry. The presence of PVA had also an effect on the hydrolytic activity of the enzyme. Furthermore, lipase was modified by covalent linkage to PVA by means of an original procedure. With respect to the native enzyme, the modified lipase has a slightly lower specific activity, but it is more stable against heat denaturation (k _d 0.032/min at 49°C).