预处理条件对Zn/Al-CLM的丙烷芳构化性能的影响

在脉冲微反装置上考察了不同的预处理条件对Zn/Al-CLM催化剂的丙烷芳构化反应的影响。结果表明,丙烷在Zn/Al-CLM催化剂上具有一定的的反应活性和芳烃选择性,而且芳构化主要转化为苯;载体Al-CLM的焙烧温度、金属锌负载量、活化温度等对Zn/Al-CLM催化剂的丙烷芳构化性能具有重要影响。载体经500℃预焙烧制备的Zn/Al-CLM催化剂具有最好的柱结构保留度,从而表现出最佳的芳构化性能;随着锌含量的增加,Zn/Al-CLM催化剂的酸量增大,从而使丙烷转化率增大,而选择性则是锌含量质量分数为5．8％时具有极大值;400℃活化处理可使Zn与Al-CLM之间具有适中的相互作用,从而使得Zn/Al-CLM具有较高的芳烃收率。     

Palladium-catalyzed oxyarylation of olefins using silver carbonate as the base. Probing the mechanism by electrospray ionization mass spectrometry

The Pd(OAc)₂-catalyzed oxyarylation of electron-rich (8 and 12) and electron-poor (10) olefins by ortho-iodophenols (3a-d) was studied using Ag₂CO₃ as the base, in acetone, and in the presence and absence of PPh₃. The corresponding adducts of oxyarylation were obtained in moderate yields. The reaction mechanism was examined by electrospray ionization mass spectrometry (ESI-MS). Cationic arylpalladium intermediate (14), formed by the oxidative insertion of Pd(0) into 3a, and the cationic palladacycles (15), obtained by reaction of 14 with olefins 8 and 12, were intercepted by ESI-MS and characterized by ESI-MS/MS.     

Chemical constituents of the bark of Dipteryx alata vogel, an active species against Bothrops jararacussu venom

The effect of four sub-extracts prepared from the lyophilized hydroalcoholic bark of Dipteryx alata (Leguminosae-Papilionoideae) dissolved in a methanol-water (80:20) mixture through a liquid-liquid partition procedure has been investigated against the neuromuscular blockade of the venom of the snake Bothrops jararacussu. The active CH?Cl? sub-extract has been extensively analyzed for its chemical constituents, resulting in the isolation of four lupane-type triterpenoids: lupeol, lupenone, 28-hydroxylup-20(29)-en-3-one, betulin, nine isoflavonoids: 8-O-methylretusin, 7-hydroxy-5,6,4'-trimethoxyisoflavone, afrormosin, 7-hydroxy-8,3',4'-trimethoxyisoflavone, 7,3'-dihydroxy-8,4'-dimethoxyisoflavone, odoratin, 7,8,3'-trihydroxy-4'-methoxyisoflavone, 7,8,3'-trihydroxy-6,4'-dimethoxyisoflavone, dipteryxin, one chalcone: isoliquiritigenin, one aurone: sulfuretin and three phenolic compounds: vanillic acid, vanillin, and protocatechuic acid. Their chemical structures were elucidated on the basis of spectroscopic analysis, including HRMS, 1D- and 2D-NMR techniques.     

Preparation and methane adsorption of two-dimensional carbide Ti<Subscript>2</Subscript>C

Here a novel material for methane adsorption was synthesized and studied, which is a graphene-like two-dimensional (2D) carbide (Ti₂C, a member of MXenes), formed by exfoliating Ti₂AlC powders in a solution of lithium fluoride (LiF) and hydrochloric acid (HCl) at 40 °C for 48 h. Based on first-principles calculation, theoretically perfect Ti₂C with O termination has a specific surface area (SSA) of 671 m² g^?1 and methane storage capacity is 22.9 wt%. Experimentally, 2.85 % exfoliated Ti₂C with mesopores shown methane capacity of 11.58 cm³ (STP: 0 °C, 1 bar) g^?1 (0.82 wt%) under 5 MPa and the SSA was 19.1 m² g^?1. For Ti₂C sample intercalated with NH₃·H₂O, the adsorbed amount was increased to 16.81 cm³ (STP) g^?1 at same temperature. At the temperature of 323 K, the adsorbed amount of as-prepared Ti₂C was increased to 52.76 cm³ (STP) g^?1. For fully exfoliated Ti₂C, the methane capacity was supposed to be 28.8 wt% or 1148 V (STP)v^?1. Ti₂C theoretically has much larger volume methane capacity than current methane storage materials, though its SSA is not very high.     

Evaluation of thermal stability of enalapril maleate tablets using thermogravimetry and differential scanning calorimetry

Differential scanning calorimetry (DSC) and thermogravimetry (TG) were used in order to evaluate the thermal stability of an enalapril maleate formulation packaged in two types of packaging, polyvinyl chloride/aluminum blister and aluminum strip. Enalapril and the excipients employed in the formulation were also evaluated by TG and DSC. Tablets were analyzed before and after storage in an acclimatized room at 40 °C and relative humidity of 75 % for 90 days. The DSC and TG results were compared with the results of dosage of enalapril and related compounds obtained by high-performance liquid chromatography. These results indicate an occurrence of chemical interaction between enalapril maleate and the excipients during its storage. After storage, it was observed that the enalapril content reduced and the predominant degradation product was diketopiperazine for both types of packaging. The predominance of diketopiperazine could be related to the absence of sodium bicarbonate in the tablets, alkalinizing agent employed in the thermal stabilization of the drug.     

Cadmium determination in biological samples by direct solid sampling flame atomic absorption spectrometry

A direct solid sampling flame atomic absorption spectrometric procedure for trace determination of cadmium in biological samples has been developed. Test samples (0.05–2.00 mg) were ground and weighed into small polyethylene vials, which were connected to the device for solid sample introduction into a conventional air/acetylene flame. Test samples were carried as a dry aerosol to a quartz cell, placed between the burner and the optical path, which had a perpendicular entrance and a slit in the upper part. The atomic vapor generated in the flame produced a transient signal that was totally integrated within 1 s. The effect of operating conditions and the extent of grinding on the analytical signal were evaluated. Background signals were always low and a characteristic mass of 0.29 ng Cd was obtained. Calibration was performed using different masses of solid certified reference materials. Results obtained for certified and in-house reference materials were typically within the 95% confidence interval of the certified and/or reference value, and the precision, expressed as relative standard deviation, was between 3.8 and 6.7%. The proposed system is simple and it might be adapted to conventional atomic absorption spectrometers allowing the determination of Cd in more than 80 test samples per hour, excluding weighing.     

Determination of lead in seawater by inductively coupled plasma optical emission spectrometry after separation and pre-concentration with cocrystallized naphthalene alizarin

An analytical method for separation and pre-concentration of lead in seawater for determination by inductively coupled plasma optical emission spectrometry has been investigated. Lead was retained in the solid phase (0.5 g) composed of co-precipitated naphthalene and alizarin red. The solid phase quantitatively sorbs Pb(II) at pH 8–9, and the metal was eluted using 5.0 ml of 2 mol l⁻¹ nitric acid. The effect of NaCl, KCl, BaCl₂, CaCl₂, Na₂SO₄, MgCl₂ and Na₃PO₄ on the sorption of Pb(II) in the solid phase was studied. A set of solutions containing varying amounts of electrolytes (0.5; 1.0; 3.0 and 5.0% m/v) with Pb (50 μg) was prepared and the recommended procedure applied. The Na₃PO₄ was found to interfere; the other electrolytes did not interfere up to 5% m/v. A pre-concentration factor of 40 was obtained in this analytical procedure. The limit of detection and limit of quantification for Pb(II) were 53 and 176 μg l⁻¹, respectively. Lead was determined in seawater samples collected in Salvador city, Bahia, Brazil. The precision, expressed as R.S.D., was 1.8–4.6%, and the recovery of lead added to seawater samples was 95–97%.     

Facile and practical enantioselective synthesis of propargylic alcohols by direct addition of alkynes to aldehydes catalyzed by chiral disulfide–oxazolidine ligands

The enantioselective alkynylation reaction of aldehydes with alkynes and diethylzinc, catalyzed by chiral disulfide–oxazolidine ligands, provides a simple, practical and inexpensive method to access chiral propargylic alcohols in good yields and satisfactory ee's.