Oxygen isotope corrections for online delta(34)S analysis

Elemental analyzers have been successfully coupled to stable-isotope-ratio mass spectrometers for online measurements of the delta(34)S isotopic composition of plants, animals and soils. We found that the online technology for automated delta(34)S isotopic determinations did not yield reproducible oxygen isotopic compositions in the SO(2) produced, and as a result calculated delta(34)S values were often 1-3 per thousand too high versus their correct values, particularly for plant and animal samples with high C/S ratio. Here we provide empirical and analytical methods for correcting the S isotope values for oxygen isotope variations, and further detail a new SO(2)-SiO(2) buffering method that minimizes detrimental oxygen isotope variations in SO(2).     

Cell lysis on a microfluidic CD (compact disc)

Cell lysis was demonstrated on a microfluidic CD (Compact Disc) platform. In this purely mechanical lysis method, spherical particles (beads) in a lysis chamber microfabricated in a CD, cause disruption of mammalian (CHO-K1), bacterial (Escherichia coli), and yeast (Saccharomyces cerevisiae) cells. Interactions between beads and cells are generated in the rimming flow established inside a partially filled annular chamber in the CD rotating around a horizontal axis. To maximize bead-cell interactions in the lysis chamber, the CD was spun forward and backwards around this axis, using high acceleration for 5 to 7 min. Investigation on inter-particle forces (friction and collision) identified the following parameters; bead density, angular velocity, acceleration rate, and solid volume fraction as having the most significant contribution to cell lysis. Cell disruption efficiency was verified either through direct microscopic viewing or measurement of the DNA concentration after cell lysing. Lysis efficiency relative to a conventional lysis protocol was approximately 65%. In the long term, this work is geared towards CD based sample-to-answer nucleic acid analysis which will include cell lysis, DNA purification, DNA amplification, and DNA hybridization detection.     

A New ent‐Kaurane Diterpene from Stems of Alibertia macrophylla K. Schum. (Rubiaceae)

Phytochemical investigations of the stems of a specimen of Alibertia macrophylla led to the isolation and characterization of the new diterpene ent‐kaurane‐2β,3α,16α‐triol ( 1 ), along with triterpenes 2 – 8 , iridoids 9 – 12 , and phenolic acids 13 – 15 . The structure of 1 was established based on spectroscopic studies (¹H‐ and ¹³C‐NMR, IR, and HR‐ESI‐MS). This is the first report of the isolation of a diterpene from the Alibertia genus in Rubiaceae.     

Synthesis of new isoxazoles derivatives attached to sugar moieties

This work reports the synthesis of isoxazoles linked to sugar derivatives in different positions of furanosidic rings, by intramolecular oxidative cyclization of α,β‐unsaturated oximes with iodine, potassium iodide and sodium hydrogen carbonate. These oximes were obtained from aldehyde‐sugar derivatives.     

Technological quality determination of pharmaceutical disintegrant by DSC cooling and DSC photovisual

A number of disintegrants are available on the market. They improve tablets’ disintegration. The objective of this work is the comparison of the technological quality parameters of disintegrants using different analytical techniques. Three batches of disintegrants and their binary mixtures (water:disintegrants) were investigated. Cooling experiments were used from –30 up to 200°C. The data obtained showed calorimetric differences between the samples. In the binary mixtures water showed different crystallization behaviour from the one found in the literature. According to the results DSC technique helped the quality control of different disintegrants.     

Graft copolymerisation of acrylamide onto cashew gum

The synthesis of cashew gum-g-polyacrylamide was carried out at 60 °C by a radical polymerisation using potassium persulphate as the redox initiator under N₂ atmosphere. A series of graft copolymers, varying in acrylamide concentration and keeping the concentration of the initiator and polysaccharide constant, was prepared. These graft copolymers were characterised by elemental analysis, infrared and ¹³C NMR spectroscopy, rheological studies, differential scanning calorimetry and thermogravimetric analysis. Comparisons amongst grafting parameters of the reaction of various natural polysaccharides with polyacrylamide (PAM) were carried out. High percentages of acrylamide conversion (%C) and grafting efficiency (%E) were obtained for cashew gum (CG), even with a low acrylamide/gum ratio. All copolymers had intrinsic viscosity and thus the hydrodynamic volume much higher than the CG value and closer to the PAM. The CG-g-PAM solution had an absolute viscosity at 2.5% concentration (wt./vol.) up to 33 and 3.3 times the CG and PAM values, respectively. Grafting of PAM chains onto the polysaccharide enhances its thermal stability.     

A spot test for the detection of periodate

Perrhenate is quantitatively extracted into methyl isobutyl ketone from aqueous solutions containing copper(II), azide and an excess of 2,2'-bipyridine. Measurement of the extracted copper either by spectrophotometry or by atomic absorption spectrometry, allows the determination of perrhenate in the ranges 16–40 μg ml⁻¹ or 3–16 μg ml⁻¹ in the final dilution, respectively. The procedure is highly selective, being applicable in the presence of a large concentration of molybdate and a considerable number of foreign ions. The extracted species corresponds to the formula CuN₃(bipy)₂ ReO₄.     

The effects of solvation in the theoretical spectra of cationic dyes

We present a quantum-mechanical study on the solvent effects in the structure and electronic spectra of some cationic dyes: acridine orange, proflavine, safranine, neutral red, thionine and methylene blue. The geometry optimizations were carried out with the AM1 and DFT (with B3LYP functional) methods and the theoretical spectra of the dyes under study were obtained with Zindo time-dependent methods (TD–DFT and TD–HF). The solvation methodology adopted was the integral equation formulation (IEF) version of the polarizable continuum model (PCM).     

Activity characterization of 192Ir brachytherapy wires

Summary The radionuclide ¹⁹²Ir has been increasingly used as a brachytherapy source and manufactured in different geometry forms (thin wires, hairpins, needles or point sources). A procedure for the characterization of the activity content of ¹⁹²Ir wire sources was developed in order to establish the secondary standard activity measurement system based on the ionization chamber set up at Brazilian National Laboratory for Ionizing Radiation Metrology (LNMRI). Firstly, the ion current of the ionization chamber is measured and, subsequently, the activity is determined in a destructive analysis. This procedure enables obtaining the calibration factor for wire sources that can be used for further activity determination of similar sources in a non-destructive analysis. Accurate activity determination is needed for dosimetric measurements and for helping the manufacturers to improve its quality control programs.     

Selenium redox cycling in the protective effects of organoselenides against oxidant-induced DNA damage

The biological role of selenium is a subject of intense current interest, and the antioxidant activity of selenoenzymes is now known to be dependent upon redox cycling of selenium within their active sites. Exogenously supplied or metabolically generated organoselenium compounds, capable of propagating a selenium redox cycle, might therefore supplement natural cellular defenses against the oxidizing agents generated during metabolism. We now report evidence that selenium redox cycling can enhance the protective effects of organoselenium compounds against oxidant-induced DNA damage. Phenylaminoethyl selenides were found to protect plasmid DNA from peroxynitrite-mediated damage by scavenging this powerful cellular oxidant and forming phenylaminoethyl selenoxides as the sole selenium-containing products. The redox properties of these organoselenoxide compounds were investigated, and the first redox potentials of selenoxides in the literature are reported here. Rate constants were determined for the reactions of the selenoxides with cellular reductants such as glutathione (GSH). These kinetic data were then used in a MatLab simulation, which showed the feasibility of selenium redox cycling by GSH in the presence of the cellular oxidant, peroxynitrite. Experiments were then carried out in which peroxynitrite-mediated plasmid DNA nick formation in the presence or absence of organoselenium compounds and GSH was monitored. The results demonstrate that GSH-mediated redox cycling of selenium enhances the protective effects of phenylaminoethyl selenides against peroxynitrite-induced DNA damage.