Mössbauer effect study of the diagenesis on the southern brazilian triassic paleoherpetofauna

Mössbauer spectroscopy is applied to identify the iron contents of bony elements of southern Brazilian Triassic reptile remains, and the question of the paragenetic mineral assemblage is discussed.     

Interdiffusion studies in Bi-based layered systems with nanosecond laser pulses

Interdiffusion processes are induced by nanosecond laser pulses from an excimer laser. The Bi-based systems studied are formed by a Bi layer and a Sb or Ge layer. Configurations with Bi at the surface layer or at the innermost layer are both studied. Real-time reflectivity measurements are performed during the irradiation to determine the process kinetics and times and Rutherford backscattering spectrometry is used to obtain the concentration depth profiles. It will be shown that there is an interfacially initiated diffusion process in the Bi-Sb system and that the diffusion coefficients of this system within the liquid phase are in the 10^–5–10^–6 cm²/s range. The Bi-Ge system shows instead little mixing, the diffusion coefficients of the system within the liquid phase being at least two orders of magnitude lower. The differences observed when Bi is the surface layer or the innermost one are related to the different thermal responses of the system.     

EPR study of the diluted magnetic semiconductor CuGa1−xMnxTe2

Electron paramagnetic resonance (EPR) experiments were made in the diluted magnetic semiconductor CuGa_1−xMn_xTe₂, in the temperature range 70<T<300 K. The samples were synthesized by direct fusion of stoichiometric mixtures of the elements, with Mn composition from x=0.0 to 0.25. The EPR spectra were measured as function of temperature, Mn composition, and field orientation. The temperature variation of the resonance field shows a critical point at about 235 K, and is associated with a transition from the ferromagnetic to the superparamagnetic state. The resonance field was also measured as a function of the field angle, and displays a well-defined uniaxial symmetry. This uniaxial field depends on the Mn concentration and is due to tetragonal distortions induced by Mn²⁺ at Ga sites, and the demagnetizing effects due to formation of ferromagnetism (FM) Mn-clusters.     

Structural, vibrational and optical studies on an amorphous Se90P10 alloy produced by mechanical alloying

We investigated some physicochemical properties of an amorphous Se(90)P(10) alloy produced by mechanical alloying through x-ray diffraction, Raman spectroscopy, optical absorption spectroscopy and EXAFS techniques. The total structure factor obtained from x-ray diffraction and the EXAFS χ(k) oscillations on the Se K edge were used in reverse Monte Carlo simulations to obtain structural information such as average coordination numbers and interatomic distances and the distribution of structural units present in the alloy. In addition, we also determined the vibrational modes and the optical band gap energy of the alloy.     

M?ssbauer analysis of high-energy mechanical-milled sand fraction of a magnetic soil developing on basalt

A sample of the coarse sand fraction from the soil material of the A-horizon (0?C0.2 m from the soil surface) of a dusky red magnetic Oxisol was submitted to high-energy mechanical milling for different times. This assay aimed mainly at (a) monitoring the individualization of strongly aggregated mineral particles, and (b) measuring the effect of the milling pressure on the mineralogy changes of the material. These data are also intended to experimentally subside any physical model describing the mechanical behavior of the superficial soil layer that is subjected to intensive machine management, in agriculture fields. Powder X-ray data reveal that some mineralogical phases, notably gibbsite, disappear soon after the first few hours milling. The 298 K-transmission Mössbauer spectrum for the non-milled sand sample shows a qualitatively typical pattern for the sand fraction of basalt derived soils, with magnetically ordered sextets, assignable mainly to hematite and maghemite, and an intense central (super)paramagnetic Fe^3?+? doublet. For the milled samples, spectra revealed progressive spectral reduction of the magnetic hyperfine structure, with concomitant increase of relative subspectral areas due to (super)paramagnetic phases, as the milling time increased. This result is consistent with the reduction of measured saturation magnetization, from 4.96(8) J T^???1 kg^???1, for the non-milled sample, to 3.26(7) J T^???1 kg^???1, for the sample milled for 8 hours.     

On the ferromagnetism of AlFe2B2

Based on extensive Mossbauer effect (ME) and magnetization measurements, the orthorhombic AlFe₂B₂ was characterized as a ferromagnet (FM) because this character is evident as an onset of a FM transition at T_c=320 K and characteristic magnetizations isotherms below T_c. At liquid helium temperatures, the magnetization saturates to μ_sat≈1μ_B per Fe atom; a value which is half the one reported for the iron metal indicating a relatively more filled 3d band. The ME analysis revealed a hyperfine field H(0) of 88(2) kOe, an isomer shift (relative to Fe) of 0.50(2) mm/s, and a quadrupole parameter of 0.02 mm/s: all parameters extrapolated to zero Kelvin. The itinerant character of the magnetic moment will be discussed.     

Correlation of Electron Beams and Hard X‐ray Emissions in ISTTOK Tokamak

The paper reports on experimental studies of electron beams in the ISTTOK tokamak, those were performed by means of an improved four‐channel detector. The Cherenkov‐type detector measuring head was equipped with four radiators made of two types of alumina‐nitrate (AlN) poly‐crystals: machinable and translucent ones, both of 10 mm in diameter and 2.5 mm in thickness. The movable support that enabled the whole detectors to be placed inside the tokamak vacuum chamber, at chosen positions along the ISTTOK minor radius. Since the electron energy distribution is one of the most important characteristics of tokamak plasmas, the main aim of the study was to perform estimations of an energy spectrum of the recorded electrons. For this purpose the radiators were coated with molybdenum (Mo) layers of different thickness. The technique based on the use of Cherenkov‐type detectors enabled the detection of fast electrons (of energy above 66 keV) and determination of their spatial and temporal characteristics in the ISTTOK experiment. Measurements of hard X‐rays (HXR), which were emitted during ISTTOK discharges, have also been performed. Particular attention was paid to the correlation measurements of HXR pulses with run‐away electron beams. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ionic conduction and thermal properties of poly(ethylene oxide) - Er (CF3SO3)3 films

Measurements of electrical conductivity and thermal behaviour have been carried out on polymer electrolyte films obtained by the addition of erbium triflate to poly(ethylene oxide), PEO. Homogeneous electrolyte samples were prepared by using solvent casting and hot-pressing techniques to produce films with a composition defined by the general formula (EO)_nEr(CF₃SO₃)₃, where n lies between 3 and 150. This electrolyte system was found to behave in a manner broadly similar to other trivalent salt containing polymer electrolytes, however, in contrast to previously studied lanthanide systems, a salt - polymer complex crystallized after prolonged annealing of salt rich compositions at room temperature. Paper presented at the 2nd Euroconference on Solid State Ionics, Funchal, Madeira, Portugal, Sept. 10 – 16, 1995