Inoculum studies in production of penicillin g acylase by Bacillus megaterium ATCC 14945

This article reports studies concerning the production of penicillin G acylase (PGA) by Bacillus megaterium. This enzyme has industrial use in the hydrolysis of penicillin G to obtain 6-aminopenicillanic acid, an essential intermediate for the production of semisynthetic β-lactam antibiotics. Although most microorganisms produce the enzyme intracellularly, B. megaterium provides extracellular PGA. The enzyme production by microorganisms involves several steps, resulting in a many operational variables to be studied. The study of the inoculum is an important step to be accomplished, before addressing other issues such as culture optimization and downstream processing. In this study, using a standard inoculum as reference, several runs were performed aiming at the definition of operational conditions in the PGA production. Cell concentration and PGA activity in the production medium were measured after 24, 48, and 72 h of the beginning of the production phase. This study encompasses the duration of the inoculum germination phase and the concentration of cells used to startup the germination. Based on these results, PGA productivity during the production phase was maximized. The selected values for these variables were 1.5 × 10⁷ spores/mL of germination medium, germination during 24 h, and 72 h for the production phase.     

Density of states due to donor-pair molecules in three- and two-dimensional semiconductor systems

The density of states is calculated for a random distribution of donor-pairs of hydrogenlike impurities in three- and two-dimensional systems. Recent investigations of the hydrogen molecule in the alternant–molecular–orbital approximation are here extended. We found that the lowest excited state ¹Σu (i.e., H⁺H^?), which is optically connected to the ground state, plays a relevant role in the absorption spectra of semiconductor systems.     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

预处理条件对Zn/Al-CLM的丙烷芳构化性能的影响

在脉冲微反装置上考察了不同的预处理条件对Zn/Al-CLM催化剂的丙烷芳构化反应的影响。结果表明，丙烷在Zn/Al-CLM催化剂上具有一定的的反应活性和芳烃选择性，而且芳构化主要转化为苯；载体Al-CLM的焙烧温度、金属锌负载量、活化温度等对Zn/Al-CLM催化剂的丙烷芳构化性能具有重要影响。载体经500℃预焙烧制备的Zn/Al-CLM催化剂具有最好的柱结构保留度，从而表现出最佳的芳构化性能；随着锌含量的增加，Zn/Al-CLM催化剂的酸量增大，从而使丙烷转化率增大，而选择性则是锌含量质量分数为5．8％时具有极大值；400℃活化处理可使Zn与Al-CLM之间具有适中的相互作用，从而使得Zn/Al-CLM具有较高的芳烃收率。     

Chemical synthesis and firefly luciferase produced dehydroluciferyl-coenzyme A

Dehydroluciferyl-coenzyme A (L-CoA) was chemically synthesized and characterized by MS, UV-vis spectrometry and RP-HPLC. The identity of the chemically synthesized compound with the one that was produced by firefly luciferase was confirmed. Moreover, the reversibility of the enzymatic conversion of dehydroluciferin ? dehydroluciferyl-adenylate ? L-CoA was also confirmed. The chemical synthesis of L-CoA, described here, may help the clarification of the activator effect of CoA on luciferase bioluminescent assays, in which the enzyme catalyzed formation of L-CoA and the consequent destruction of L-AMP is one of the possible explanations for that effect.     

Dynamics and energetics of the self-assembly of a hydrophobically modified polyelectrolyte: Naphthalene-labeled poly(acrylic acid)

Steady-state and time-resolved fluorescence studies were performed on aqueous solutions of poly(acrylic acid) hydrophobically modified with two very different levels of naphthalene (Np). It is demonstrated that unique information on association phenomena involving hydrophobe-modifed polymers can be obtained from an extended fluorescence study by using data for a less-modified polymer as a reference. For the more highly modified polymer, the presence of excited-state (as well as ground-state) dimers in addition to monomer emission due to locally excited naphthalene gives evidence for hydrophobic association between naphthalene groups. This association becomes, as expected, much less important at higher pH due to the electrostatic repulsion between different chain segments. However, it is noted that even at high pH there is a significant self-association. The coexistence of static and dynamic quenching phenomena of the Np monomer label was also revealed in the time-resolved fluorescence data. The data are compatible with the existence of two types of monomers and one excimer and suggest that the essential contribution to the monomer emission comes from isolated chromophores, whereas excimer formation arises from both a dynamic route (excited Np chromophores able to produce a dynamic excimer) and a static route (excitation of ground-state Np dimers). At room temperature, the dissociative reaction, excimer-to-monomer, can be neglected, and thus the rate constant for excimer formation and decay could be obtained with and without considering the influence of preformed dimers. Temperature has shown to induce different behavior in the polymer photophysics. In the case of the less-labeled polymer, the decays were found to be single-exponential with the fluorescence lifetime decreasing with increasing temperature. From the temperature dependence of the steady-state fluorescence data, the activation energy for excimer formation and the binding energy of the excimer were evaluated at different pH values, through the Stevens-Ban-type plots of the excimer-to-monomer intensity ratio. With the time-resolved data, measured in the temperature range of 5-60 degrees C, it was possible to extract the intrinsic activation energies for excimer formation. The thermodynamic driving force for the intrapolymeric association was found to be dependent on a balance between hydrophobic and electrostatic interactions, which are dependent on the pH, temperature, and hydrophobic content of the polymer.     

Lanthanide nitrate complexes with 2-azacyclononanone

Thermal behavior of rare earth nitrate complexes with 2-azacyclononanone (AZA) with Ln(NO₃)₃·3(AZA) composition (where Ln=Gd, Er and Ho) was analyzed in kinetic point of view. Kinetic parameters were calculated from thermogravimetric data. All obtained results were similar. The first decomposition step was representative to the loss of ligand and the residue was essentially Ln₂O₃. Furthermore, a reaction path was proposed for the thermal decomposition of the Ln(NO₃)₃·3(AZA).     

Thermodynamic properties of quinoxaline-1,4-dioxide derivatives: a combined experimental and computational study

The mean (N-O) bond dissociation enthalpies were derived for three 2-methyl-3-(R)-quinoxaline 1,4-dioxide (1) derivatives, with R = methyl (1a), ethoxycarbonyl (1b), and benzyl (1c). The standard molar enthalpies of formation in the gaseous state at T = 298.15 K for the three 1 derivatives were determined from the enthalpies of combustion of the crystalline solids and their enthalpies of sublimation. In parallel, accurate density functional theory-based calculations were carried out in order to estimate the gas-phase enthalpies of formation for the corresponding quinoxaline derivatives. Also, theoretical calculations were used to obtain the first and second N-O dissociation enthalpies. These dissociation enthalpies are in excellent agreement with the experimental results herewith reported.     

Discrimination between peptide 3(10)- and alpha-helices. Theoretical analysis of the impact of alpha-methyl substitution on experimental spectra

Detailed spectral simulations based on ab initio density functional theory computations of the amide I and II infrared (IR) and vibrational circular dichroism (VCD) spectra for Ac-(Ala)(4)-NH(2), Ac-(Aib-Ala)(2)-NH(2), and Ac-(Aib)(4)-NH(2) constrained to 3(10)- and alpha-helical conformations are presented. Parameters from these ab initio calculations are transferred onto corresponding larger oligopeptides to simulate the spectra for dodecamers. The differences between conformations and for different Aib substitution patterns within a conformation are reflected in observable spectral patterns where data are available. Simulated IR spectra show small frequency shifts in the amide I maxima between 3(10)- and alpha-helices, but the same magnitude shifts occur within one conformation upon Aib substitution. Thus, from a computational basis, the frequency of the amide I maximum does not discriminate between the 3(10)- or alpha-helical conformations. Calculated VCD band shapes for 3(10)-helices showed more significant changes in amplitude, with change in the fraction of Aib, than those for alpha-helices. Generally, with increasing Aib content, the overall amide I VCD intensity becomes weaker and the amide I couplet becomes more conservative, while the amide II VCD is less affected. Although the detailed band shape is shown to be sensitive to alpha-Me substitution, the basic pattern of amide I and II relative VCD intensities still differs between alpha- and 3(10)-helices and, as a consequence, successfully discriminates between them. These predictions are all borne out in experimental spectra of Aib, mixed Aib-Ala, and Ala-based helical peptides, where available.     

Study of the behaviour of amino acids in aqueous solution by time-domain NMR and high-resolution NMR

The study of protein hydration by time-domain NMR is complicated by the great number of interactions involved, resulting from the presence of several amino acids and the possible modifications produced by the various structures. Moreover, a good comprehension of the molecular interactions of the simple amino acids in solution is essential to elucidate the mechanism of the biological functions of proteins. Measurements of transverse relaxation rates of the protons of water (R(2) = 1/T(2)) in aqueous solutions of amino acids such as L-glycine, L-asparagine, L-arginine and L-tryptophan were carried out in order to study the effects of chemical exchange and molecular diffusion on the amplitude of R(2). The values of R(2) measured by the Carr-Purcell-Meiboom-Gill (CPMG) sequence were studied while varying the solution pH and the parameters of the CPMG sequence. The dependence of R(2) on pH and tau (inter-pulse delay between the first and the second pulses of the CPMG sequence) is interpreted in terms of chemical exchange between the protons of water and those of the labile amino acid groups. This interpretation was confirmed by the analysis of the proton spectra acquired using a 300 MHz NMR spectrometer.