Theoretical investigation on electron scattering by benzene in the intermediate-energy range

We present a theoretical investigation on electron scattering by benzene (C₆H₆) in the intermediate-energy range. Calculated elastic differential, integral, and momentum-transfer as well as total (elastic + inelastic) and total absorption cross sections are reported for impact energies ranging from 20 to 500 eV. A complex optical potential is used to represent the electron-molecule interaction dynamics. A theoretical method based on the single-center-expansion close-coupling framework and corrected by the Padé approximant [F.A. Gianturco, R.R. Lucchese, N. Sanna, J. Chem. Phys. 102 (1995) 5743] is used to solve the scattering equations. The comparison of our calculated results with the experimental and theoretical data available in the literature is encouraging.     

Quantitation of glucosamine sulfate in plasma by HPLC-MS/MS after administration of powder for oral solution formulation

A rapid method for the quantification of glucosamine in human plasma using high‐performance liquid chromatography coupled to tandem mass spectrometry was developed and validated. The sample preparation includes a simple deproteinization step, using d ‐[1‐¹³C] glucosamine hydrochloride as an internal standard. Chromatographic separation was performed on an ACE Ciano column using isocratic elution with acetonitrile and aqueous 2 mm ammonium acetate containing 0.025% formic acid (80:20). Selected reaction monitoring was performed using the transitions m/z 180.1 → m/z 72.1 and m/z 181.0 → m/z 74.6 to quantify glucosamine and internal standard, respectively. The method was validated and proved to be linear, accurate and precise over the range 50–5000 ng/mL of glucosamine. Recovery rates higher than 90% were obtained for both glucosamine and internal standard. No matrix effect was detected in the samples. The validated method was successfully applied to a pharmacokinetic study after oral administration of a powder for oral solution formulation containing glucosamine sulfate. Copyright © 2011 John Wiley & Sons, Ltd.     

Tuning the excitonic and plasmonic properties of copper chalcogenide nanocrystals

The optical properties of stoichiometric copper chalcogenide nanocrystals (NCs) are characterized by strong interband transitions in the blue part of the spectral range and a weaker absorption onset up to ~1000 nm, with negligible absorption in the near-infrared (NIR). Oxygen exposure leads to a gradual transformation of stoichiometric copper chalcogenide NCs (namely, Cu(2-x)S and Cu(2-x)Se, x = 0) into their nonstoichiometric counterparts (Cu(2-x)S and Cu(2-x)Se, x > 0), entailing the appearance and evolution of an intense localized surface plasmon (LSP) band in the NIR. We also show that well-defined copper telluride NCs (Cu(2-x)Te, x > 0) display a NIR LSP, in analogy to nonstoichiometric copper sulfide and selenide NCs. The LSP band in copper chalcogenide NCs can be tuned by actively controlling their degree of copper deficiency via oxidation and reduction experiments. We show that this controlled LSP tuning affects the excitonic transitions in the NCs, resulting in photoluminescence (PL) quenching upon oxidation and PL recovery upon subsequent reduction. Time-resolved PL spectroscopy reveals a decrease in exciton lifetime correlated to the PL quenching upon LSP evolution. Finally, we report on the dynamics of LSPs in nonstoichiometric copper chalcogenide NCs. Through pump-probe experiments, we determined the time constants for carrier-phonon scattering involved in LSP cooling. Our results demonstrate that copper chalcogenide NCs offer the unique property of holding excitons and highly tunable LSPs on demand, and hence they are envisaged as a unique platform for the evaluation of exciton/LSP interactions.     

Production of Thermophilic Endo-β-1,4-xylanases by <Emphasis Type="Italic">Aspergillus fumigatus</Emphasis> FBSPE-05 Using Agro-industrial By-products

In the present paper, endo-β-1,4-xylanase production by Aspergillus fumigatus was evaluated in solid-state fermentation using low-cost substrates such as sugarcane bagasse (SCB), brewer’s spent grain (BSG), and wheat bran (WB). The partial characterization of the crude enzyme was also performed. In the experimental conditions, the highest levels of endo-β-1,4-xylanase production by A. fumigatus FBSPE-05 occurred within 8 days incubation when using SCB/liquid medium at 1:2 ratio (219.5 U g⁻¹) and 4 days incubation when using WB/liquid medium at 1:1 ratio (215.6 U g⁻¹). Crude enzyme from this last condition was used to enzyme characterization, showing best enzyme activity at 60 °C and pH 6.0, which suggests a thermophilic endoxylanase. The crude enzyme retained 73% of its activity after 1 h at 60 °C, and zymogram has shown three bands of endo-β-1,4-xylanase activity, with different molecular masses. A. fumigatus FBSPE-05 was able to grow and produce good levels of endo-β-1,4-xylanase using agro-industrial by-products, making this strain worthy for further investigation. To our knowledge, this is the first study reporting the use of SCB and/or BSG as sole substrates for endoxylanase production by solid-state fermentation using A. fumigatus.     

Development of metrological models for internal standard single-point and multi-point calibrations for the assessment of tear gas weapons compliance with legislation

Tear gases are the most widely used non-lethal weapons, both by security forces and by the general public. The pepper spray, whose active agent is capsaicin, is the only self-defence aerosol allowed in Portugal, where capsaicin concentration must be below 5 g/100 mL. The cost-effective evaluation of the compliance of self-defence weapons with legislation involves the use of two measurement procedures with increasing quantitative capability. Samples are first assessed by preliminary measurement procedure based on single-point GC–MS calibration. Whenever the measurement uncertainty from this assessment makes evaluation inconclusive, the evaluation of sample compliance using multi-point GC–MS calibration is performed. Metrological models including sound criteria for the evaluation of sample compliance with legislation were developed for both measurement procedures. Such models include the evaluation of the impact of instrumental performance, calibration model, sample dilution and standards preparation on measurement uncertainty. The relative expanded uncertainty, in the studied range (capsaicin 3–7 g/100 mL), of measurements supported in single-point calibrations ranged from 10 to 22% and the ones supported on multi-point calibrations from 8 to 12% depending on capsaicin concentration and daily GC–MS repeatability. Measurements are fit for the intended use since they present a relative expanded uncertainty smaller than a target value of 30, or 15%, for measurements supported in single- or multi-point calibrations, respectively.     

Electrochromic properties of a metallo-supramolecular polymer derived from tetra(2-pyridyl-1,4-pyrazine) ligands integrated in thin multilayer films

The electrochromic behavior of iron complexes derived from tetra-2-pyridyl-1,4-pyrazine (TPPZ) and a hexacyanoferrate species in polyelectrolytic multilayer adsorbed films is described for the first time. This complex macromolecule was deposited onto indium-tin oxide (ITO) substrates via self-assembly, and the morphology of the modified electrodes was studied using atomic force microscopy (AFM), which indicated that the hybrid film containing the polyelectrolyte multilayer and the iron complex was highly homogeneous and was approximately 50 nm thick. The modified electrodes exhibited excellent electrochromic behavior with both intense and persistent coloration as well as a chromatic contrast of approximately 70%. In addition, this system achieved high electrochromic efficiency (over 70 cm(2) C(-1) at 630 nm) and a response time that could be measured in milliseconds. The electrode was cycled more than 10(3) times, indicating excellent stability.     

On the formation of carbonate adducts of fatty alcohols, sterols, and sugars in biological conditions

The formation and properties of carbonate adducts of some organic hydroxy compounds in aqueous medium were investigated. Fatty alcohols and sugars were chosen as representative classes of biological interest, and the medium was carbonated aqueous solution with pH ranging from 3.0 to 8.3. Capillary electrophoresis with two capacitively coupled contactless conductivity detectors (C⁴Ds) was used for quantitation and to obtain the mobility of the monoalkyl carbonates (MACs), which were used to determine the equilibrium and kinetic constants of the reaction as well as the diffusion coefficients. For increasing chain length of the alcohols, the equilibrium constant tends to the unit, which suggests that fatty alcohols can form the corresponding MACs. The formation of MACs for cyclohexanol and cyclopentanol also suggest the existence of similar species for sterols. Carbonate adducts of fructose, glucose, and sucrose were also detected, which suggests that these counterparts of the well‐known phosphates can also occur in the cytosol. Our calculations suggest that one in 1000 to one in 10 000 molecules of these hydroxy compounds would be available as the corresponding MAC in such a medium. Experiments carried out at pH values less than 3.0 showed that there is a catalytic effect of hydronium on the interconversion of bicarbonate and a MAC. Taking into account the great number of hydroxy compounds similar to the ones investigated and that bicarbonate is ubiquitous in living cells, one can anticipate the existence of a whole new class of carbonate adducts of these metabolites.     

Interfacial concentrations of chloride and bromide in zwitterionic micelles with opposite dipoles: experimental determination by chemical trapping and a theoretical description

Interfacial concentrations of chloride and bromide ions, with Li(+), Na(+), K(+), Rb(+), Cs(+), trimethylammonium (TMA(+)), Ca(2+), and Mg(2+) as counterions, were determined by chemical trapping in micelles formed by two zwitterionic surfactants, namely N-hexadecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (HPS) and hexadecylphosphorylcholine (HDPC) micelles. Appropriate standard curves for the chemical trapping method were obtained by measuring the product yields of chloride and bromide salts with 2,4,6-trimethyl-benzenediazonium (BF(4)) in the presence of low molecular analogs (N,N,N-trimethyl-propane sulfonate and methyl-phosphorylcholine) of the employed surfactants. The experimentally determined values for the local Br(-) (Cl(-)) concentrations were modeled by fully integrated non-linear Poisson Boltzmann equations. The best fits to all experimental data were obtained by considering that ions at the interface are not fixed at an adsorption site but are free to move in the interfacial plane. In addition, the calculation of ion distribution allowed the estimation of the degree of ion coverage by using standard chemical potential differences accounting for ion specificity.     

Theoretical spectroscopic study of europium tris(bipyridine) cryptates

A series of europium cryptates are studied, using semiempirical methods to predict electronic and spectroscopic properties. The results are compared with theoretical (DFT) and experimental results published by Guillaumont and co-workers (ChemPhysChem2007, 8, 480). Triplet energies calculated by semiempirical methods have errors similar to those obtained by TD-DFT methodology but hundreds of times faster. Moreover, the semiempirical results not only reproduce well the experimental values but also help explain the low values of quantum efficiency observed for these complexes.     

Osmium catalyzed asymmetric dihydroxylation of methyl trans-cinnamate in ionic liquids, followed by supercritical CO2 product recovery

In this work, osmium-catalyzed asymmetric dihydroxylation (AD) of methyl trans-cinnamate was studied. Osmium and chiral ligand catalysts were immobilized in ionic liquid only, without any other reaction solvents, while the recovery of the product was performed by extraction with supercritical CO₂, and compared with results obtained by extractions with organic solvents such as hexane and diethyl ether. In supercritical CO₂ extraction experiments, optimal extraction pressure was found and ionic liquid chosen, so that the highest reaction yields coupled with lowest osmium content in the crude product can be achieved. Finally, recycle experiments of the same (ionic liquid + catalytic system) mixture were successfully conducted. Application of ionic liquids and supercritical CO₂ in osmium catalyzed AD allows for the isolation of the diol basically without contamination with osmium, in high yield and enantiomeric excess, and it makes possible the efficient reuse of ionic liquid solvent and the catalytic system.