一维光子晶体缺陷模的偏振特性研究

利用周期结构的布洛赫定理推导了一维无限光子晶体缺陷模方程,研究了缺陷模的偏振特性,以及在不同入射角和缺陷层厚度下缺陷模位置的变化.利用传输矩阵方法对有限周期数光子晶体也进行了研究,分别对应一维无限光子晶体和有限周期数光子晶体给出了数值计算结果.通过比较这两者的数值结果得出了缺陷模随入射角和缺陷层厚度变化的一般规律.     

Photo-induced Fluorescence of Fluometuron in a Continuous-flow Multicommutation Assembly

This paper deals with the photo-induced fluorimetric determination of the herbicide Fluometuron with the aid of a continuous-flow assembly of the emergent and new methodology known as Multicommutation which was provided with an on-line photoreactor. Maximum fluorescence intensity was observed at basic pH solutions, 1×10⁻⁴ mol l⁻¹ NaOH, after 1.4 min of irradiation and being the maximum at λ_exc 247.0 nm and λ_em 325.0 nm. The influence of different experimental parameters either chemical (pH, surfactants presence, solvent polarity and temperature) or hydrodynamic (time of photo-degradation, size and number of different segments and flow-rate) was tested. The linear dynamic range was from 0.01 to 4.0 mg l⁻¹ of Fluometuron; the inter-day reproducibility (as R.S.D.) of the slope was 0.001% and 1.7% from the peaks intra-day reproducibility. A large series of potential interferents was studied and finally the method was applied to human urine, soil, formulation and water samples.     

Quantum Stackelberg Duopoly of Continuous Distributed Asymmetric Information

The minimal quantization structure is employed to investigate the quantum version of the Stackelberg duopoly with continuous distributed asymmetric information, i.e a continuous distribution while the second mover has the first mover has incomplete information that obeys complete information. It is found that the effects of the positive quantum entanglement on the outcomes exhibit many interesting features due to the information asymmetry. Moreover, although the first-mover advantage is counteracted by the information asymmetry, the positive quantum entanglement still enhances the first-mover advantage and improves the first-mover tolerance of the information asymmetry beyond the classical limit.     

Design, Fabrication and Measurement of Ni/Ti Multilayer Used for Neutron Monochromator

Ni/Ti multilayers, which can be used for neutron monochromators, are designed, fabricated and measured. Firstly, their reflectivities are simulated based on the Nevot-Croce model. Reflectivities of two Ni/Ti multilayer mirrors with periods d = 10.3 nm （M1） and d = 7.8 nm （M2） are calculated. In the calculation, the reflectivity of the Ni/Ti multilayer is taken as a function of the gazing angle with different roughness factors δ =1.0 nm and = 1.5 nm. Secondly, these two multilayers are fabricated by the direct current magnetron sputtering technology. Thirdly their structures are characterized by small-angle x-ray diffraction. The roughness factors are fitted to be 0.68 nm and 1.16nm for M1 and M2, respectively. Finally their reflective performances are measured on the V14 neutron beam line at the Berlin Neutron Scattering Centre （BENSC）, Germany. The experimental data show that the grazing angle of the reflected neutron intensity peak increases, but the reflected neutron intensity decreases, with the decreasing periods of the multilayers.     

固体沿光轴方向的极缓慢速度和微小位移的激光多普勒测量

为了实现目标极缓慢速度和微小位移的实时、准确监测,消除各种干扰对微弱多普勒信号的影响,设计了一套激光多普勒测速(LDV)系统。该系统采用迈克尔逊干涉光路和调幅解调、相敏检测技术,具有较强的抗干扰能力。实验结果表明,该系统可实现固体目标沿光轴方向μm/s级速度和μm级位移的实时、准确测量。该系统光路结构简单,对目标的表面状况无特殊要求,可用于滑坡、地陷等地质灾害的监测,及桥梁、大坝等工程结构变形状况的检测,该方案对相关科学实验和工件精密测量也有重要意义。     

Research of the planar optical fiber Bragg grating hydrophone probe

This paper presents the planar Fiber Bragg Grating （FBG） hydrophone probe sensing principle, and theoretically and experimentally researches the probe structure sensitivity, the receiving sensitivity frequency response characteristic and the acceleration response property. Planar sheet is made of stainless steel, its thickness is 0.15 mm, its diameter is 15mm, and the length of hollow circular shell is 20 mm. For this size of the structure, the probe structure sensitivity is up to 23 fm/Pa, which is about 7300 times of the value of the bare fiber. The resonance frequency is 6.5 kHz, and the amplitude-frequency curve of the receiving sensitivity response is relatively flat within the frequency range of 100 Hz to 5.5 kHz. The output yielded by one unit acceleration （1m/s2） is equivalent to （2.52 to 3.26 Pa） acoustic pressure acting output. This probe structure is easy to form FBG hydrophone array by multiplexing technique. The research shows that this planar structure not only can form FBG hydrophone probe, but also can constitute optical FBG laser hydrophone probe. The structure can realize different bandwidth, different range acoustic pressure measurement by adjusting the geometrical size of the sheet.     

基于在聚合物中掺杂染料DCJTB的白色有机电致发光器件

将Alq₃和DCJTB作为掺杂物与基质PVK按照不同比例混合共溶,旋涂成膜,制备了PVK∶Alq₃∶DCJTB为发光层的结构为ITO/ PVK∶Alq₃∶DCJTB/ BCP/Alq₃/LiF/Al的器件,其中Alq₃和BCP分别用作电子传输层和空穴阻挡层,PVK用作蓝光发光层和空穴传输层。保持PVK和DCJTB的质量比为100∶1不变,改变PVK和 Alq₃的质量比,当PVK和Alq3的质量比为20∶1时,得到了效果较好的白光。器件在电压为14 V时,色坐标达到(0.33,0.36),在10～14 V范围内变化甚微。     

叶顶间隙尺度的不确定性对压气机性能影响的CFD模拟

本文研究了转子叶顶间隙尺度的不确定性对某轴流压气机的气动性能的影响。采用非嵌入式概率配置点法模拟间隙尺度不确定性在流场中的传播。先以二维随机方腔流动为模型,通过与蒙特卡洛模拟进行对比对非嵌入式概率配置点法进行验证。验证后采用该不确定性方法模拟了当叶顶间隙大小服从Beta分布时气动性能及流场参数的变化。     

水溶性CdTe量子点荧光探针的制备表征及应用

采用水相合成法,在氮气气氛下,以3-巯基丙酸(MPA)为稳定剂制备了水溶性的CdTe量子点,并通过荧光(PL)光谱、紫外可见(UV-Vis)光谱、透射电子显微镜(TEM)和X射线粉末衍射(XRD)对样品进行了表征。XRD结果表明量子点为立方闪锌矿结构,TEM结果表明量子点分散性较好,形状为球形,平均粒径为2.0 nm。进一步考察了回流时间、反应温度和体系pH值对量子点性能的影响,结果表明:回流时间、反应温度和体系pH值对量子点的粒径大小、粒径分布及生长速度均有影响。基于量子点对金属离子具有荧光响应的特性,以CdTe量子点为荧光探针实现了对水溶液中Ni2+的检测。     

基于ZEMAX高功率半导体激光器光纤耦合设计

随着半导体激光器光源在激光加工领域的应用不断拓展,研制高耦合效率的半导体激光器光纤耦合模块变得十分重要。为了进一步提高光纤耦合激光二极管模块的输出功率,本文应用ZEMAX光学设计软件进行仿真模拟,将12只波长为808 nm、输出功率为10 W的单管半导体激光器通过合束方法高效率耦合进光纤。耦合光纤芯径为150μm、数值孔径为0.22,光纤输出功率为116.2 W,耦合效率为96.8%。