Capillary zone electrophoretic separation and determination of imidazolic antifungal drugs

Capillary zone electrophoresis (CZE) was adapted to the simultaneous determination of a mixture of three imidazolic antifungal drugs. Separation was achieved by using a fused-silica capillary column with an acetic acid-Tris buffer at pH 5.18 and UV detection at 196 nm. Several electrophoretic parameters were investigated: pH and buffer concentration, applied voltage, temperature and injection conditions. The optimized CZE method was applied to the individual determination of ketoconazole, clotrimazole and econazole in pharmaceutical forms, after a previous single extraction step in methanol, with recoveries of 98.00, 99.96 and 99.58% respectively. The antifungal drugs can be determined at a concentration level lower than 1.0 x 10(-7) M.     

Comparison of different derivatization approaches for mercury speciation in biological tissues by gas chromatography/inductively coupled plasma mass spectrometry

A novel interface design for coupling gas chromatography and inductively coupled plasma mass spectrometry (GC/ICP-MS) was used to perform mercury speciation in biological tissues. Three derivatization approaches were optimized and compared for this purpose: anhydrous butylation using a Grignard reagent, aqueous ethylation by means of NaEt(4)B and aqueous propylation with NaPr(4)B. The last reagent was synthesized in the laboratory as it is not commercially available. Detection limits obtained by GC/ICP-MS ranged between 100 and 200 fg (as absolute mass) for methylmercury and between 500 and 600 fg for inorganic mercury using a 1 microl injection. Quantification of methyl- and inorganic mercury was carried out by resorting to aqueous calibration, using ethylmercury as internal standard for both propylation and butylation derivatization techniques. For ethylation procedures, a methylpropylmercury solution was used as internal standard. The absence of transmethylation during sample preparation was checked using a 97% enriched (202)Hg inorganic standard. The accuracy of the three derivatization approaches was evaluated by the analysis of the certified reference material DOLT-2 (dogfish liver) from the National Research Council of Canada and certified for methylmercury, with satisfactory results.     

Optimization and validation of a method for the determination of caffeine, 8-chlorotheophylline and diphenhydramine by isocratic high-performance liquid chromatography. Stress test for stability evaluation

The optimization of a HPLC method for caffeine, 8-chlorotheophylline and diphenhydramine separation with UV detection at 229 nm is described. The conditions studied included: stationary phase, compositions of mobile phases with pH modulators. Optimal conditions were: SymmetryShield RP8 column and acetonitrile–(0.01 M H₃PO₄–triethylamine, pH 2.8) (22:78, v/v). Validation was performed using standards and a pharmaceutical preparation containing the compounds described above. Results from both standards and samples show suitable validation parameters. The pharmaceutical grade substances were tested by factors that could influence the chemical stability. These reaction mixtures were analyzed to evaluate the capability of the method to separate degradation products. Degradation products did not interfere with the determination of the substances tested by the assay.     

新型偶氮苯金属液晶化合物的合成与性能研究

合成了新型偶氮苯金属配合物。 分别采用光谱分析、热分析及X射线衍射测试技术对样品进行了表征。结果表明,连接偶氮苯和金属配合物之间碳链的长度对该化合物的相转变和荧光特性具有特殊的影响。 该系列化合物在紫外光和热作用下具有99%以上的偶氮苯顺-反异构化反应效率;具有290和560 nm这2个波段荧光发射光谱。由其中一个金属液晶化合物分散在聚甲基丙烯酸甲酯网络而形成的介质可作为全息信息存储材料而实现全息图像的写入和读出。     

用于水中有机磷农药检测的离子迁移率谱仪预富集进样方法

建立了检测水中有机磷农药的离子迁移率谱仪预富集进样方法。预富集器由表面覆盖有吸附薄膜的微热板、聚四氟乙烯电路板和管座组成,具有操作简单,无需有机溶剂,自加热,热容小,功耗低等优点。以马拉硫磷检测为例,分析了富集器解吸升温速率和离子迁移率谱仪半透膜温度对检测结果的影响。采用高温短时脉冲加热和低温维持加热相结合的解吸方式,既可形成较高的进样浓度脉冲,又可减少进入漂移管的杂质,有利于提高离子迁移率谱仪检测灵敏度。实验表明:采用所述预富集及两阶段加热解吸进样方法,对水中马拉硫磷的检出限为3.9μg/L,达到了国家标准对水中有机磷检测的要求。     

A novel (18)O inverse labeling-based workflow for accurate bottom-up mass spectrometry quantification of proteins separated by gel electrophoresis

In the present work we report on a novel and fast protocol for accurate bottom-up protein quantification that overcomes the drawbacks of in-gel digestion and MALDI analysis, while maintaining their benefits. It relies on the following steps: (i) gel electrophoresis separation of proteins, (ii) fast in-gel protein digestion with trypsin, (iii) (18)O-labeling through the decoupled method, (iv) quantification through selected peptides previously chosen using the (18)O inverse labeling approach and that, finally, (v) it takes advantage of software specifically developed to select the peptides that will drive the quantification of the protein in an automated mode. We have accurately quantified the following six proteins: glycogen phosphorylase, BSA, ovalbumin, carbonic anhydrase, trypsin inhibitor, and α-lactalbumin. As a case study we have quantified the protein vitellogenin in plasma of Cyprinus carpio exposed to high levels of estrogens. The proposed new protocol was validated against the traditional ELISA method; both were found to provide comparable results (non-parametric Mann-Whitney U-test).     

Evaluation of the effects of Candidatus Liberibacter asiaticus on inoculated citrus plants using laser-induced breakdown spectroscopy (LIBS) and chemometrics tools

This study investigated the organic and inorganic constituents of healthy leaves and Candidatus Liberibacter asiaticus (CLas)-inoculated leaves of citrus plants. The bacteria CLas are one of the causal agents of citrus greening (or Huanglongbing) and its effect on citrus leaves was investigated using laser-induced breakdown spectroscopy (LIBS) combined with chemometrics. The information obtained from the LIBS spectra profiles with chemometrics analysis was promising for the construction of predictive models to identify healthy and infected plants. The major, macro- and microconstituents were relevant for differentiation of the sample conditions. The models were then applied to different inoculation times (from 1 to 8 months). The models were effective in the classification of 82-97% of the diseased samples with a 95% significance level. The novelty of this method was in the fingerprinting of healthy and diseased plants based on their organic and inorganic contents.     

The method of Gaussian weighted trajectories. V. On the 1GB procedure for polyatomic processes

In recent years, many chemical reactions have been studied by means of the quasiclassical trajectory (QCT) method within the Gaussian binning (GB) procedure. The latter consists of "quantizing" the final vibrational actions in Bohr spirit by putting strong emphasis on the trajectories reaching the products with vibrational actions close to integer values. A major drawback of this procedure is that if N is the number of product vibrational modes, the amount of trajectories necessary to converge the calculations is ～10(N)×larger than with the standard QCT method. Applying it to polyatomic processes is thus problematic. In a recent paper, however, Czako? and Bowman propose to quantize the total vibrational energy instead of the vibrational actions [G. Czako? and J. M. Bowman, J. Chem. Phys. 131, 244302 (2009)], a procedure called 1GB here. The calculations are then only ～10 times more time consuming than with the standard QCT method, allowing thereby for considerable numerical saving. In this paper, we propose some theoretical arguments supporting the 1GB procedure and check its validity on model test cases as well as the prototype four-atom reaction OH+D(2)→HOD+D.     

Chemistry of the oxophosphinidene ligand. 2. Reactivity of the anionic complexes [MCp{P(O)R*}(CO)(2)](-) (M = Mo, W; R* = 2,4,6-C(6)H(2)(t)Bu(3)) toward electrophiles based on elements different from carbon

The anionic oxophosphinidene complexes (H-DBU)[MCp{P(O)R*}(CO)(2)] (M = Mo, W; R* = 2,4,6-C(6)H(2)(t)Bu(3); Cp = η(5)-C(5)H(5), DBU = 1,8-diazabicyclo [5.4.0] undec-7-ene) displayed multisite reactivity when faced with different electrophilic reagents. The reactions with the group 14 organochloride compounds ER(4-x)Cl(x) (E = Si, Ge, Sn, Pb) led to either phosphide-like, oxophosphinidene-bridged derivatives [MCp{P(OE')R*}(CO)(2)] (E' = SiMe(3), SiPh(3), GePh(3), GeMe(2)Cl) or to terminal oxophosphinidene complexes [MCp{P(O)R*}(CO)(2)(E')] (E' = SnPh(3), SnPh(2)Cl, PbPh(3); Mo-Pb = 2.8845(4) ? for the MoPb compound). A particular situation was found in the reaction with SnMe(3)Cl, this giving a product existing in both tautomeric forms, with the phosphide-like complex [MCp{P(OSnMe(3))R*}(CO)(2)] prevailing at room temperature and the tautomer [MCp{P(O)R*}(CO)(2)(SnMe(3))] being the unique species present below 203 K in dichloromethane solution. The title anions also showed a multisite behavior when reacting with transition-metal based electrophiles. Thus, the reactions with the complexes [M'Cp(2)Cl(2)] (M' = Ti, Zr) gave phosphide-like derivatives [MCp{P(OM')R*}(CO)(2)] (M = Mo, M' = TiCp(2)Cl, ZrCp(2)Cl; M = W, M' = ZrCp(2)Cl), displaying a bridging κ(1),κ(1)-P,O- oxophosphinidene ligand connecting MCp(CO)(2) and M'Cp(2)Cl metal fragments (W-P = 2.233(1) ?, O-Zr = 2.016(4) ? for the WZr compound]. In contrast, the reactions with the complex [AuCl{P(p-tol)(3)}] gave the metal-metal bonded derivatives trans-[MCp{P(O)R*}(CO)(2){AuP(p-tol)(3)}] (M = Mo, W; Mo-Au = 2.7071(7) ?). From all the above results it was concluded that the terminal oxophosphinidene complexes are preferentially formed under conditions of orbital control, while charge-controlled reactions tend to give derivatives with the electrophilic fragment bound to the oxygen atom of the oxophosphinidene ligand (phosphide-like, oxophosphinidene-bridged derivatives).     

元素改性对分子筛催化裂化性能的调变作用

1 催化裂化技术的重要性及存在的问题 1.1 催化裂化技术的重要性 催化裂化是指在石油炼制过程中, 在热和催化剂的作用下使重油发生裂化反应, 转化为裂化气、汽油和柴油等的过程. 从20世纪90年代开始, 随着世界原油的重质化和劣质化日趋严重, 而且市场对重质燃料的需求越来越少, 使重油催化裂化得以迅速发展. 据美国石油炼制协会统计, 目前重油催化裂化(RFCC)约占催化裂化总能力的25%, 并将逐年增加, 重油加工将成为21世纪催化裂化发展的重要方向.