埋地热油管道正常运行的数值模拟研究

对高凝原油管道输送的水力热力问题进行分析研究,掌握管线运行规律,保证管线安全经济运行有着重要意义.本文建立了埋地热油管道正常运行的数学模型,采用非结构化网格和有限容积法对该问题进行了研究,计算结果与实验测量值吻合良好.     

流动注射停流-催化光度法测定环境水样中痕量Mn(Ⅱ)的研究

在碱性介质中,Mn(Ⅱ)对催化KIO4氧化镁试剂Ⅰ(对硝基苯偶氮间苯二酚)的褪色反应有显著作用。据此建立了测定痕量Mn(Ⅱ)的流动注射停流-催化光度法。优化了流动注射条件,Mn(Ⅱ)在2~10μg/L,10~160μg/L,160~1000μg/L范围内符合比尔定律,采样频率6样/h,检出限0.12μg/L,相对标准偏差(RSD)4.9%(n=6)。用于环境水样中Mn(Ⅱ)的检测,回收率为95.5%~102%。     

α-氨基膦酸酯的合成方法研究进展

从Lewis催化剂合成法、非Lewis催化剂合成法、绿色合成法3个方面综述了近年来国内外在α-氨基膦酸酯合成研究领域的最新进展.参考文献33篇.     

The First Online Capillary Electrophoresis-Microscale Thermophoresis (CE-MST) Method for the Analysis of Dynamic Equilibria—The Determination of the Acidity Constant of Fluorescein Isothiocyanate

This article presents the first successful application of a capillary electrophoresis-microscale thermophoresis tandem technique (CE-MST) for determining the values of equilibrium constant, realized by connecting online the CE and MST instruments using a fused-silica capillary. The acid-base dissociation of fluorescein isothiocyanate, expressed by the acidity constant value (pK_a), was used as a model. The measurement procedure consisted of introducing a mixture containing the analyte and a deliberately added interferent into the CE capillary, electrophoretic separation of the analyte from the interferent, the detection of the analyte with a CE-integrated detector, detection with a MST detector, and then stopping the flow temporarily by turning off the voltage source to conduct the thermophoretic measurement. The analysis of migration times, peak areas and MST responses obtained concurrently for the same sample allowed us to determine the pK_a value using three independent methods integrated within one instrumentation. The analyte was effectively separated from the interferent, and the acidity values turned out to be consistent with each other. An attempt was also made to replace the standard commercial CE instrument with a home-made portable CE setup. As a result, the similar pK_a value was obtained, at the same time proving the possibility of increasing cost efficiency and reducing energy consumption. Overall, the CE-MST technique has a number of limitations, but its unique analytical capabilities may be beneficial for some applications, especially when sample separation is needed prior to the thermophoretic measurement.     

Variable Separation and Exact Separable Solutions for Equations of Type uxt=A(u,ux)uxx+B(u,ux)

The generalized conditional symmetry is developed to study the variable separation for equations of type u_xt=A(u,u_x)u_xx+B(u,u_x). Complete classification of those equations which admit derivative-dependent functional separable solutions is obtained and some of their exact separable solutions are constructed.     

Pressure-Dependent Base-Wavefunction Admixture and Lifetime of R1 State of La3Lu2Ga3O12:Cr3+

As a key factor leading to the pressure-dependent R₁-line-shift reversal and R₁-state lifetime, at 10 K, the pressure-dependent variation of mixing-degree of |t₂²(³T₁)e⁴T₂〉 and |t₂³² E〉base-wavefunctions in the wavefunction of R₁ state of LLGG:Cr³⁺ has been calculated and analyzed. From this, the physical origin of the pressure-dependent R₁-line-shift reversal has been revealed. Furthermore, by using the pressure-dependent values of the sum of all square mixing-coefficients of |t₂²(³T₁)e⁴T₂〉in the wavefunction of R₁ state, the lifetimes of R₁ state of LLGG:Cr³⁺ at various pressures have been calculated, which are in good agreement with observed results. The quantum anticrossing effect between t₂³²E and t₂²(³T₁)e⁴T₂ levels due to both spin-orbital interaction and electron-phonon interaction is remarkable, which is related to the admixture of |t₂²(³T₁)e⁴T₂〉and |t₂³² E〉as well as the low-high crystal-field transition.     

Ru、Rh、Pd掺杂GaSb的电子结构和光学性质

运用第一性原理计算方法研究了过渡族金属TM(TM=Ru、Rh、Pd)掺杂GaSb的电子结构和光学性质,结果表明:TM掺杂GaSb主要以TM替代Ga(TM @Ga)缺陷存在,并可增强GaSb半导体材料对红外光区光子的响应,使体系光学吸收谱的吸收边红移;TM@Ga所引入的杂质能级分布于零点费米能级附近,这极大地增强了体系的介电性能,促进了电子-空穴对的产生和迁移,因而提升了掺杂体系的光电转换效率;Ru 掺杂对GaSb光学性质的改善最为明显,当掺杂浓度为6.25%(原子数分数)且均匀掺杂时,Ru掺杂GaSb体系对红外光区光子的吸收幅度最大,有效提升了GaSb光电转换效率和光催化活性。     

H2SO4-H2O中硝酸铜对脱硫石膏晶须生长的影响

以处理后的脱硫石膏为原料,在H₂SO₄-H₂O体系中以Cu(NO₃)₂为晶形控制剂采用水热法制备脱硫石膏晶须,探讨了Cu(NO₃)₂对脱硫石膏晶须生长的影响机理。结果表明:Cu(NO₃)₂对脱硫石膏有明显促溶作用,其中Cu²⁺可减小溶液中各离子的活度系数,使溶液中的Ca²⁺浓度增大。NO^-₃通过静电作用在Ca²⁺周围聚集并对SO^2-₄产生屏蔽作用,导致脱硫石膏继续溶解并使Ca²⁺和SO^2-₄的浓度处于相对稳定状态,有利于半水脱硫石膏晶体的形核与生长。此外,Cu²⁺还可在晶须的生长过程中选择性吸附在晶须表面,生成CuSO₄,促进了脱硫石膏的结晶生长,最终在Cu(NO₃)₂用量为2.0%(质量分数)时制备的脱硫石膏晶须长径比约为73。     

改进型单晶炉提拉系统偏心平衡研究

随着光伏行业的快速发展, 对硅单晶的品质和长晶装备的稳定性的要求也不断提高。直拉法是生产硅单晶的主要方法,通过提高单晶炉副室的高度以扩大单晶硅的生产规模。由于副室高度的大幅增加,且单晶炉提拉头质心相对于旋转轴心有一定距离,对单晶炉整体稳定性有较大影响,从而降低了单晶硅的生产质量。针对此问题,对单晶炉建立可靠的力学分析模型,采用数值仿真方法,对单晶炉整体进行动力学响应分析,计算得到副室高度增加后的单晶炉工作时中钨丝绳下端晶棒的运动规律以及最大摆动幅度,为改进设计提供依据。数值仿真分析表明提高单晶炉副室高度后,提拉头较大的质心偏心是单晶炉提拉系统发生摆动的主要原因。在此基础上提出在提拉头上添加质心调节装置,通过控制系统调节可保证提拉头质心位置在旋转轴线上以降低提拉系统的摆动。     

DMF体系中Cu2O球晶的制备及形貌分析

以N,N-二甲基甲酰胺(DMF)为溶剂,通过改变铜源和表面活性剂,调控反应参数,溶剂热条件下制备了三维十字形、空心及实心的Cu₂O球晶。利用XRD、SEM等表征手段,分析探讨了工艺条件变化对Cu₂O球晶形貌的影响。研究表明,随着DMF浓度的增大,体系的还原能力增强,Cu⁺增多,溶液的过饱和度增大,Cu₂O晶体集合体形态由晶体结构控制的各向异性与对称性的球晶逐渐向各向同性球晶演变。十二烷基硫酸钠(SDS)、十六烷基三甲基溴化铵(CTAB)、聚乙烯吡咯烷酮(PVP)等表面活性剂有助于降低溶液的过饱和度,增加结晶质的表面扩散能力,有利于规则形态Cu₂O晶粒的形成。反应体系中,Cu(Ac)₂·H₂O水解生成的羧基与DMF中的甲酰基在高温下发生脱羧反应产生CO₂气体以及SDS发泡作用产生的气体是形成空心Cu₂O球晶的重要原因。