Fe(III)与2,3-二羟基苯磺酸钠配位反应的动力学研究

[H+]在0.01～0.70mol?L-1范围内,离子强度为1.00mol?L-1,[Fe(III)]>>[配体]、[H+]>>[配体]的条件下,研究了Fe(III)与2,3-二羟基苯磺酸钠(Tiron)的配位反应.发现当[H+]≤3.00×10-2mol?L-1时,[Fe(III)]2对反应速率有明显的贡献.求得了相关反应的动力学参数,从而揭示了FeOH2+和FeOH24+与Tiron配位的解离反应途径及FeOH32+的缔合反应机制,并提出了该配位反应的可能机理.     

容量法测定氧化钒中的各种价态钒

用NaOH溶液处理样品，分离V（V）然后以Fe(Ⅱ）滴定测定之。定量加入过量的V（V）到上述残渣中并用H2SO4溶解，用Fe(Ⅱ）滴定，计算出V（Ⅱ），V（Ⅲ）的含量。V（Ⅳ）的测定是通过从总钒量中扣除V（Ⅱ）、V（Ⅲ）、V（Ⅴ）的含量得到。V（Ⅱ）、V（Ⅲ）和V（Ⅴ）的回收率均大于96％，其8次测定结果的相对标准偏差分别为：9．8％、0．4％、1．2％；本法快速、简便，在实际应用中效果良好。     

Nanostructure Pt Electrode Obtained via Self-assembly of Nanoparticles on Conductive Oxide-coated Glass Substrate

Self-assembly of platinum nanoparticles were applied to fabrication of counter electrode for dye-sensitized solar cells on conductive oxide-coated glass substrate. The present Pt electrode exhibits high exchange current density of 220 mA/cm^2, which is comparable to those prepared by electrodeposition, magnetron sputtering or thermal decomposition of platinum chloride. After analysis by transmission electron microscopy (TEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS), it was found that the catalyst was structurally characterized as nanosized platinum metal clusters and was continuously arranged on electrode surface. The present nanostructure electrode had high electrocatalytic activity for the reduction of iodine in organic solution.     

Prediction of the binding site of 1-benzyl-4-[(5,6-dimethoxy-1-indanon-2-yl)methyl]piperidine in acetylcholinesterase by docking studies with the SYSDOC program

Summary In the preceding paper we reported on a docking study with the SYSDOC program for predicting the binding sites of huperzine A in acetylcholinesterase (AChE) [Pang, Y.-P. and Kozikowski, A.P., J. Comput.-Aided Mol. Design, 8 (1994) 669]. Here we present a prediction of the binding sites of 1-benzyl-4-[(5,6-dimethoxy-1-indanon-2-yl)methyl]piperidine (E2020) in AChE by the same method. E2020 is one of the most potent and selective reversible inhibitors of AChE, and this molecule has puzzled researchers, partly due to its flexible structure, in understanding how it binds to AChE. Based on the results of docking 1320 different conformers of E2020 into 69 different conformers of AChE and on the pharmacological data reported for E2020 and its analogs, we predict that both the R- and the S-isomer of E2020 span the whole binding cavity of AChE, with the ammonium group interacting mainly with Trp⁸⁴, Phe³³⁰ and Asp⁷², the phenyl group interacting mainly with Trp⁸⁴ and Phe³³⁰, and the indanone moiety interacting mainly with Tyr⁷⁰ and Trp²⁷⁹. The topography of the calculated E2020 binding sites provides insights into understanding the high potency of E2020 in the inhibition of AChE and provides hints as to possible structural modifications for identifying improved AChE inhibitors as potential therapeutics for the palliative treatment of Alzheimer's disease.     

Capacity factors and peak widths in the gradient elution reversed phase separation of high molar mass polystyrenes

Summary A simplex method for determining the constantsS andk _o from the equation lnk’=lnk _o−S ϕ (was developed and applied to the reversed phase separation of high molar mass polystyrenes using gradients of any curvature. Experimental retention times described using the equation had a standard deviation of 1.1%. The inclusion of a quadratic term in the equation was found to be unwarranted. BothS and lnk _o varied linearly with ln molar mass. The logarithm of peak width of an eluting polystyrene peak was found to be a linear function of the mobile phase composition at elution. The slope was equal toS.     

低温和低压下水热合成Na4Zr2(SiO4)3

以ZrOCl_2·8H_2O,Na_2SiO_3·9H_2O和NaOH为原料,在250℃约100bar的条件下,水热晶化合成出Na_4Zr_2(SiO_4)_3,并生长相应的单晶。讨论了水热反应及其条件.产物借助于XRD,Raman,~(29)Si MAS NMR以及阻抗谱技术进行了研究.结果表明产物具有与其他方法制备的Na_4Zr_2(SiO_4)_3相同的性质.     

脱氢姜黄烯及其类似物的合成

利用苯乙酮及苯乙酮衍生物,经过傅-克乙酰化反应、偶联反应、Wittig烯化反应,合成了脱氢姜黄烯及其类似物.再经选择性催化氢化反应,可分别得到α-姜黄烯、黄根醇甲醚及姜黄氢醌甲醚.     

SYNTHESIS OF MESOPOROUS POLY(STYRENE-co-MALEIC ANHYDRIDE)/SILICA HYBRID MATERIALS VIA A NONSURFACTANT-TEMPLATED SOL-GEL PROCESS*

Mesoporous poly (styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis wasachieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymerin the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template orpore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder X-ray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m~2/g) andpore volumes (e.g. 0.6 cm~3/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, porevolumes and pore diameters of the hybrid materials increase.