紫杉醇的合成进展

紫杉醇是一种重要的抗癌药物,它具有复杂新颖的化学结构,为三环二萜类化合物.本文综述了紫杉醇的半合成和紫杉烷环的各种合成方法.     

Dicyano-Functionalized MCM-41-Supported Palladium Complex as An Efficient Catalyst for Allylation of Aldehydes and Ketones

Dicyano-functionalized MCM-41-supported palladium complex was prepared from dicyano-functionalized MCM-41 and palladium chloride. This complex exhibited high catalytic activity in the allylation of aldehydes and ketones with allylic chlorides in the presence of SnCl2. This polymeric palladium complex can be recovered and reused without noticeable loss of activity.     

用两种相似多糖类手性固定相拆分阿托品外消旋对映体的比较

分别涂敷纤维素-三（3，5-二甲基苯基氨基甲酸酯）（CDMPC）与直链淀粉-三（3，5-二甲基苯基氰基甲酸酯）（ADMPC）于自制的球形氨丙基硅胶上，制备了两种多糖类手性崮定相。用高效液相色谱法（HPLC）在正相条件下，用两种固定相直接拆分了阿托品（atmpine）外消旋体、在正己烷中加入了不同的醇类改性剂对阿托品进行拆分，并优化了流动相中醇类改性剂的比例：结果发现，阿托品在CDMPC固定相上可以得到基线拆分，而在ADMPC固定相上只能得到部分拆分。     

Ce0.67Zr0.33O2对CH4燃烧催化剂Fe2O3/Al2O3的改性作用

固定n(Ce)/n(Zr)比为0.67/0.33,用共沉淀法制得一系列CeO2-ZrO2-Al2O3固溶体.采用这些固溶体作载体,以Fe2O3为活性组分,用浸渍法制备了一系列催化剂.BET结果显示,将适量Ce0.67Zr0.33O2引入到Al2O3载体中有助于催化剂保持较高的比表面积.TPR结果显示,载体中引入适量的Ce0.67Zr0.33O2可以改善催化剂的氧化还原性能.XRD结果表明,Fe2O3在CeO2-ZrO2-Al2O3载体上呈现出良好的分散状况,老化前后催化剂的晶相结构基本无明显变化.特别是当载体中m(Ce0.67Zr0.33O2)∶m(Al2O3)的值为1∶2时,Fe2O3/CeO2-ZrO2-Al2O3催化剂在甲烷催化燃烧中显示出最佳的催化性能和抗高温老化性能.     

氮原子在Ni平坦和缺陷表面上的吸附和振动

 构造了氮－镍相互作用的5－参数Morse势，研究了氮原子在Ni（\r\n100），Ni（110）和Ni（111）平坦表面的吸附和振动，获得了氮原子\r\n在三个低指数表面的吸附位、吸附构型、结合能和本征振动等数据，计\r\n算结果与实验结果非常吻合．同时，与Ni（100）表面对比，系统研究\r\n了氮原子在Ni（510）台阶面的吸附和扩散．计算结果表明，氮原子在\r\n台阶下部形成最稳定的吸附态，台阶对下台面上扩散的氮原子形成捕获\r\n势，对上台面上扩散的氮原子形成反射势．     

以钛氧有机物为前驱物制备具有高光催化活性的纳米二氧化钛晶体

 纳米二氧化钛的制备方法及前驱物的差别影响其光催化活性．将20ml钛酸丁酯及30ml乙酐在密闭容器中与50ml环己烷混合，在70～85℃反应30min，生成微细的非晶钛氧有机物；经FT－IR和TGA分析，该物质被确认为计量式是TiOOOCCH3）2和TiO（OC4H9）（OOCCH3）的混合体．该钛氧有机物前驱物经焙烧后得到具有高光催化活性的纳米二氧化钛晶体．表征结果表明，钛氧有机物在焙烧过程中，其表面的吸附物及键合有机基团在400℃以前发生脱附和氧化分解；在389～405℃间形成锐钛矿型晶体，在600℃出现金红石晶型；600℃焙烧3h所得样品的比表面积为86m2／g，其二次粒子呈200～300nm条形体，孔隙大于20nm；单分散粒子为球形单晶，粒径为22nm；表面物理吸附水量为1．21％，加热至800℃时失重1．48％，粉体稳定纯净．光催化实验结果表明，以钛氧有机物为前驱物制备的纳米二氧化钛晶体具有高的光催化活性，光降解丁基罗丹明溶液的反应速率常数约为溶胶－凝胶法制备的催化剂样品的4倍．表面氧空缺和一定量的表面羟基可能是粉体具有高光催化活性的重要因素．     

Syntheses, Structures and Coordination Behavior of Central Hydroxyl Group Containing Polydentate Ligands

Proteins containing dinuclear Cu (II), Zn (II) centers play paramount roles in biology1. As mimetic of metal-dependent esterase, dinuclear Cu (II) and Zn (II) complexes have received a great deal of attentions2~6. They are of interest in the field of biomimetic chemistry to provide an improved understanding of the function of the biological sites and as potential catalysts for substrate oxidations. Schiff base type polydentate ligands which contain centeral hydroxyl group have been wid…     

固相氯化法合成氯化聚乙烯的红外光谱研究

本文研究在不同条件固相氯化聚乙烯(CPE)的红外光谱,探讨了一步和两步氯化合成的CPE的结构差别,着重讨论了两步氯化的CPE结构特点。从观察表征结晶结构和—(CH_2)_n—链段氯分布的特征频率变化表明,低温固相氯化主要发生在无定形区,并且在CPE中形成高氯化和低氯化链段(或未氯化)的嵌段结构。在两步固相氯化时,晶区受到较大程度的破坏,氯化作用已不局限在无定形区,其结晶结构的破坏主要同第二步氯化程度有关,即使CPE氯含量相同,若前后两步氯化程度不同,结构有很大差异。     

PEO-LiClO_4-ZSM5 composite polymer electrolyte (IV): Polarized optical microscopy study

All solid-state lithium polymer batteries may be one of the best choices for the future electrochemical power source, characterized by high energy densities, good cyclability, reliability and safety[1,2]. Owing to its potential capability to replace the t…     

ZrxTixAl1-2xO2的制备及其在三效催化剂上的应用

Zr_0.5Ti_0.5O₂(ZT) and Zr_0.25Ti_0.25Al_0.5O₂(ZTA) mixed oxides were prepared by co-precipitation method and characterized by low temperature adsorption-desorption， XRD and NH₃-TPD. The activity of Pt/Zr_0.5Ti_0.5O₂ and Pt/ Zr_0.5Ti_0.5Al_0.5O₂ catalysts was evaluated using the simulated gases. The results show that ZTA samples exhibit higher specific surface area， larger pore volume and proper surface acidic amount and acidity in comparison with ZT. The results of the catalytic test indicate that Pt/ZT and Pt/ZTA catalysts exhibit excellent low-temperature catalytic activity and lower light-off temperatures of hydrocarbon， carbon monoxide and nitrogen oxides， especially better conversion for nitrogen oxides (NO_x). The addition of Al₂O₃ into ZT enhanced the anti-aging property of Pt/ ZTA catalysts due to the excellent textural， structural， surface acidity and thermal stability.