A Cyclic and Polymeric Phosphazene as Solid State Template for the Formation of RuO<Subscript>2</Subscript> Nanoparticles

Pyrolysis of the organometallic polymer: {{[N=P(R₁)]_0.8[N=P(OC₆H₄CH₂CN[Ru])₂]_0.15[N=P((OC₆H₅)(OC₆H₄CH₂CN[Ru]]_0.05}{Cl}_0.31} _n , [Ru]=CpRu(PPh₃)₂, R₁ = O₂C₁₂H₈ (1) as well of the cyclic specie {N₃P₃ (OC₆H₅)₅(OC₆H₄CH₂CN[Ru])}{PF₆} (2) under a flow of air at 800°C affords nanostructured RuO₂. Nanoparticles near to 10 nm were observed. The differences in the use of cyclic or polymeric phosphazenes, as solid state template, influence strongly the morphology and slightly the composition of the pyrolytic product. Temperature variable (SQUID) measurements in the range of 5–300 K of the material obtained from the polymer, indicate an antiferromagnetic interaction between the Ru atoms, although lower than that found for the crystalline ruthenium oxide, probably due to some amorphous product present in the pyrolytic material. The possible formation mechanism is discussed and the differences in using the cyclic or the polymeric compound as precursor is analyzed in terms of the relative content of Ru to P, N. A general formation method of nanostructured metal oxides is proposed.     

Continuous chemiluminescence determination of formaldehyde in air based on Trautz-Schorigin reaction

A new continuous method for the determination of formaldehyde in air is described. A cylindrical wet effluent diffusion denuder is used for the collection of formaldehyde from air into a thin film of absorption liquid (distilled-deionized water). Formaldehyde in the denuder concentrate is on-line detected employing a chemiluminescence flow method based on a reaction of formaldehyde and gallic acid with hydrogen peroxide in an alkaline solution. The collection efficiency of formaldehyde is quantitative at the air flow rate of 0.5 L min⁻¹ (absorption liquid flow rate of 336 μL min⁻¹). The limit of detection (S/N = 3) is 0.60 μg m⁻³ HCHO (0.49 ppb). The calibration graph is linear up to 300 μg m⁻³ HCHO (244 ppb). The relative standard deviations of chemiluminescence method for 1 × 10⁻⁶ and 5 × 10⁻⁶ M HCHO are 2.87% and 1.49%, respectively. Acetaldehyde interferes negligible, other compounds do not interfere. The method was employed for formaldehyde measurement in ambient air. The comparison measurement illustrates the good agreement of results obtained by proposed method with those obtained by reference fluorimetric method.     

Photochemical Rearrangement of a Steroidal α,β-Epoxylactone. Photochemical reactions,XI [1]

The UV. irradiation of 17β-acetoxy-4α, 5α-epoxy-2-oxaandrostan-3-one ( 7 ) yields 17β-acetoxy-2-oxa-10(5 → 4)abeo-4ζ (H)-androsta-3,5-dione ( 11 ). A non-photochemical synthesis of 11 , proceeding in lower yield, is also described.     

α, α'-二胺基二苄基硒醚的合成

本文以苯骈三氮唑、胺和苯甲基醛为原料,发现Mannich反应,生成胺烷基化的苯骈三氮唑衍生物。在此衍生物中,苯骈三氮唑基是亲核取代反应的良好离去基团,易被强亲核试剂的硒负离子取代,生成对称α,α'-二胺基二苄基硒醚。反应易进行,产率较高,产物均为固体,易提纯。这是合成含氮原子的对称硒醚的较好方法。     

Mass spectra of some 2-methyl-3-(o- and p;-R-phenyl)-3,3a,4,5,6,7-hexahydro-2H-indazoles

The mass spectra of twelve 2-methyl-3-(o- and p-R-phenyl)-3,3a,4,5,6,7-hexahydro-2H-indazoles which have potentially useful pharmacological properties are presented.     

反胶束法合成氧化锌微晶及其荧光特性

0引言材料的结构(微结构)、尺寸和形貌等因素对其特性及其实际应用具有重要的影响。对无机材料特别是氧化物半导体进行结构控制的研究近年来引起了人们极大的关注。氧化锌作为一种宽带隙(3.2eV)半导体材料,可广泛应用于压电材料、气体传感器、橡胶添加剂和光学器件等领域,而且还因其在室温下可产生激射现象使其成为纳米光学材料研究领域中的一大热点[1￣6]。目前,除了传统的固相-气相(V S)反应外,用于氧化锌微晶的制备方法主要有共沉淀法[7]、多羟基化合物水解法[8]、有机金属气相沉积法[9￣12]和水热法[13]等。通过选择不同的制备方法和…     

Photochemically induced fluorescence investigation of aβ-cyclodextrin: Azure A inclusion complex and determination of analytical parameters

The photooxidation of Azure A and fluorescence properties of Azure A and its photoproduct have been investigated in aqueous media and in the presence of-cyclodextrin (-CD). The fluorescence intensity of the complex formed between the photoproduct and -CD was found to be three times higher than that of the uncomplexed Azure A photoproduct. A complex formation constant of 110±40 M^–1 was calculated using the Benesi-Hildebrand treatment of the fluorescence emission data. Although the stoichiometry of the Azure A photoproduct: -CD complex was found to be 1: 1, it seems that the Azure A structure is only partially included. Calibration graphs were plotted for the free Azure A photoproduct and the photogenerated product included in -CD. The analytical parameters and quantification limits were determined.     

Template-assisted self assembly of two lipophilic polyion aggregates derived from sodium tetraphenyl imidodiphosphinate-complexes containing sodium ions in four different coordination environments

The molecular structures of two lipophilic polyion aggregates derived from tetraphenyl imidodiphosphinate are described: [Na(crown ether)][MNa(2)[Ph(2)P(O)NP(O)Ph(2)](4)] with crown ether = 15-crown-5 for 1and benzo-15-crown-5 for (M = Na(+) for 1 and Na(H(2)O)(+) for 2).     

单壁碳纳米管的结构修饰

由于单壁碳纳米管具有独特的结构、电学及机械等性能，可望在许多新领域得 到应用，已引起广泛的关注。但由于单壁碳纳米管不溶于水和常见的有机溶剂，极 大地制约了其应用性能的研究。随着单壁碳纳米管制备技术的不断完善，其研究方 向已开始转向结构修饰及应用性能的研究。主要介绍近年来单壁碳纳米管结构修饰 方面的最新发展状况，重点讨论化学功能化及物理吸附。     

Bis(2,4,6-trifluorophenyl) derivatives of palladium(II)

Summary The organopalladium(II) complexes: Pd(2,4,6-C₆F₃H₂)₂L₂ [L=triphenylphosphine(PPh₃), methyldiphenylphosphine(PPh₂Me), dimethylphenylphosphine-(PPhMe₂) or pyridine(py); L₂=1,2-bis(diphenylphosphino)ethane(dpe), 2,2-bipyridine(bipy), 1, 10-phenanthroline(phen) or ethylenediamine(en)] have been prepared by addition of the appropriate compound to the THF-dioxane solution resulting from the arylation of potassium tetrachloropalladate(II) with (2,4,6-C₆F₃H₂)MgBr. The i.r. data suggest that the py and PPhMe₂ compounds are thecis-isomers, whereas the PPh₃ and PPh₂Me compounds have thetrans configuration.¹H- and¹⁹F-n.m.r. data for the compounds are reported.