Magnetic tuning of the electrochemical reactivity through controlled surface orientation of catalytic nanowires

Nanowires have received considerable attention owing to their broad potential applications. We report here on the application of nanowires for magnetic control of the electrochemical reactivity and demonstrate how one can modulate the electrocatalytic activity by orienting catalytic nanowires at different angles. Unlike early "on/off" magnetic switching studies based on functionalized magnetic spheres, the present magnetoswitchable protocol relies on modulating the electrochemical reactivity without removing the magnetic material from the surface. Such behavior is attributed to the reversible blocking of the redox processes and to changes in the tortuosity-dependent flux rate. The nanowire-based magnetoswitchable protocol may be extremely useful for adjusting the electrochemical reactivity, such as for tuning the power output of fuel cells (rather than switching the power on/off).     

Radical salts of bis(ethylenediseleno)tetrathiafulvalene with paramagnetic tris(oxalato)metalate anions

The synthesis, crystal structure, and physical characterization of five new radical salts formed by the organic donor bis(ethylenediseleno)tetrathiafulvalene (BEST) and the paramagnetic tris(oxalato)metalate anions [M(C2O4)3]3- (M = FeIII and CrIII) are reported. The salts isolated are (BEST)4[M(C2O4)3].PhCOOH.H2O with MIII = Cr (1) or Fe (2) (crystal data: 1, triclinic, space group P(-)1 with a = 14.0999(4) A, b = 15.3464(4) A, c =19.5000(4) A, alpha = 76.711(5) degrees, beta = 71.688(5) degrees, gamma = 88.545(5) degrees, V = 3893.5(2) A3, and Z = 2; 2, triclinic, space group P(-)1 with a = 14.0326(3) A, b =15.1981(4) A, c =19.4106(4) A, alpha = 76.739(5) degrees, beta = 71.938(5) degrees, gamma = 88.845(5) degrees, V = 3824.9(2) A3, and Z = 2), (BEST)4[M(C2O4)3].1.5H2O with MIII = Cr (3) or Fe (4) (crystal data: 3, monoclinic, space group C2/m with a = 33.7480(10) A, b =12.3151(7) A, c = 8.8218(5) A, beta = 99.674(5) degrees, V = 3614.3(3) A3, and Z = 2; 4, monoclinic, space group C2/m with a = 33.659(6) A, b =12.248(2) A, c = 8.759(2) A, beta = 99.74(3) degrees, V = 3558.9(12) A3, and Z = 2), and (BEST)9[Fe(C2O4)3]2.7H2O (5) (crystal data: triclinic, space group P(-)1 with a =12.6993(3) A, b =18.7564(4) A, c = 18.7675(4) A, alpha = 75.649(5) degrees, beta = 107.178(5) degrees, gamma = 79.527(5) degrees, V = 3977.5(3) A3, and Z = 1). The structures of all these salts consist of alternating layers of the organic donors and tris(oxalato)metalate anions. In 1 and 2 the anionic layers contain also benzoic acid molecules H-bonded to the terminal oxygen atoms of the anions. In all salts the organic layers adopt beta-type packings. Along the parallel stacks the donors form dimers in 3 and 4, trimers in 5, and tetramers in 1 and 2. All the compounds are paramagnetic semiconductors with high room-temperature conductivities and magnetic susceptibilities dominated by the Fe- or Cr-containing anions.     

Structure and bonding in monomeric iron(III) complexes with terminal oxo and hydroxo ligands

We report on the structure and bonding in the title iron(III) complexes, containing the tris[(N'-tert-butylureayl)-N-ethyl]amine ligand, with density functional theory techniques. In agreement with the experimental data, a high-spin electronic state is favored for all of the systems we considered. H bonds between the terminal oxo and hydroxo ligands and NH groups present in the organic ligand coordinated to the metal have a remarkable effect on the overall coordination geometry. In fact, the structure of model complexes without H bonds shows shorter Fe-O bond lengths. This is a consequence of the ability of the H bonds to stabilize a remarkable amount of electron density localized on the terminal oxo and hydroxo ligands. Energy analysis indicates that each H bond stabilizes the nonheme complexes by roughly 35 kJ/mol. Molecular orbital analysis indicates a reduction of two Fe-O bonding electrons on going from a complex with a terminal oxo ligand to a complex with a terminal hydroxo ligand. This reduction in the number of bonding electrons is also supported by frequency analysis.     

The melting point of ice Ih for common water models calculated from direct coexistence of the solid-liquid interface

In this work we present an implementation for the calculation of the melting point of ice I(h) from direct coexistence of the solid-liquid interface. We use molecular dynamics simulations of boxes containing liquid water and ice in contact. The implementation is based on the analysis of the evolution of the total energy along NpT simulations at different temperatures. We report the calculation of the melting point of ice I(h) at 1 bar for seven water models: SPC/E, TIP4P, TIP4P-Ew, TIP4P/ice, TIP4P/2005, TIP5P, and TIP5P-E. The results for the melting temperature from the direct coexistence simulations of this work are in agreement (within the statistical uncertainty) with those obtained previously by us from free energy calculations. By taking into account the results of this work and those of our free energy calculations, recommended values of the melting point of ice I(h) at 1 bar for the above mentioned water models are provided.     

Isolation of human serum immunoglobulins with a new salt-promoted adsorbent

In this work a highly acetylated-ethylenediamine-Novarose (HA-EDA-Novarose) gel was synthesized and used as a new agarose-based salt-promoted adsorption chromatography (SPAC) matrix to effectively isolate serum immunoglobulins without the need of denaturing conditions. Samples of human serum in 0.5 M Na2SO4, 10 mM 3-(N-morpholino)-propane-sulfonic acid (MOPS), pH 7.6 were applied to a chromatographic column packed with the SPAC gel. Immunoglobulins (Igs) with affinity for the HA-EDA ligands were specifically adsorbed to the matrix, non-bound serum proteins were readily removed by washing the column with the same feed solution buffer. Bound Igs were effectively and very gently eluted by simply removing the salt from the feed solution buffer. The elution buffer consisted thus of only 10 mM MOPS, at pH 7.6 and no salt. The salt-dependent adsorption capacity of this system was estimated to be 7.3 mg/ml with protein recovery of about 93%. Sodium dodecyl sulfate-polyacrylamide gel (SDS-PAGE) electrophoresis analysis, radial immunodiffusion and enzyme-linked immunosorbent assays showed that immunoglobulins G, M and A (IgG, IgM and IgA) were the main components present in the elution fraction. The new SPAC adsorbent was used to purify Igs from human serum and IgG and IgA from non-pure commercially available Igs preparations in a very gentle single step.     

Determination of soluble toxic arsenic species in alga samples by microwave-assisted extraction and high performance liquid chromatography-hydride generation-inductively coupled plasma-atomic emission spectrometry

A microwave-based procedure for arsenic species extraction in alga samples (Sargassum fulvellum, Chlorella vulgaris, Hizikia fusiformis and Laminaria digitata) is described. Extraction time and temperature were tested in order to evaluate the extraction efficiency of the process. Arsenic compounds were extracted in 8 ml of deionised water at 90 degrees C for 5 min. The process was repeated three times. Soluble arsenic compounds extracted accounted for about 78-98% of total arsenic. The results were compared with those obtained in a previous work, where the extraction process was carried out by ultrasonic focussed probe for 30 s. Speciation studies were carried out by high performance liquid chromatography-hydride generation-inductively coupled plasma-atomic emission spectrometry (HPLC-HG-ICP-AES). The chromatographic method allowed us to separate As(III), As(V), monomethylarsonic acid and dimethylarsinic acid in less than 13 min. The chromatographic analysis of the samples allowed us to identify and quantify As(V) in Hizikia sample and Sargasso material, while the four arsenic species studied were found in Chlorella sample. In the case of Laminaria sample, none of these species was identified by HPLC-HG-ICP-AES. However, in the chromatographic analysis of this alga by HPLC-ICP-AES, an unknown arsenic species was detected.     

Density functional theory study of 10-atom germanium clusters: effect of electron count on cluster geometry

Density functional theory (DFT) at the hybrid B3LYP level has been applied to Ge10z germanium clusters (z = -6, -4, -2, 0, +2, +4, +6) starting from 12 different initial configurations. The D4d 4,4-bicapped square antiprism found experimentally in B10H102- and other 10-vertex clusters with 22 skeletal electrons is calculated for the isoelectronic Ge102- to be the global minimum by more than 15 kcal/mol. The global minima found for electron-rich clusters Ge104- and Ge106- are not those known experimentally. However, experimentally known structures for nido-B10H14 and the pentagonal antiprism of arachno-Pd@Bi104+ are found at higher but potentially accessible energies for Ge104- and Ge106-. The global minimum for Ge10 is the C3v 3,4,4,4-tetracapped trigonal prism predicted by the Wade-Mingos rules and found experimentally in isoelectronic Ni@Ga1010-. However, only slightly above this global minimum for Ge10 (+3.3 kcal/mol) is the likewise C3v isocloso 10-vertex deltahedron found in metallaboranes such as (eta6-arene)RuB9H9 derivatives. Structures found for more electron-poor clusters Ge102+ and Ge104+ include various capped octahedra and pentagonal bipyramids. This study predicts a number of 10-vertex cluster structures that have not yet been realized experimentally but would be interesting targets for future synthetic 10-vertex cluster chemistry using vertex units isolobal with the germanium vertices used in this work.     

Seeded growth of submicron Au colloids with quadrupole plasmon resonance modes

A modified seeded growth process has been used for the controlled synthesis of quasispherical, CTAB-stabilized gold nanoparticles from 12 up to 180 nm with narrow size distributions. The UV-visible spectra of the aqueous colloids show distinct bands corresponding to dipole and quadrupole plasmon modes, for diameters above 100 nm, in close agreement with predictions based on Mie theory. The assignment of the modes is demonstrated by calculation of near field enhancement maps based on the boundary element method. Apart from other applications, since absorption is drastically reduced above 600 nm, while scattering is largely increased, these particles open new possibilities for construction of highly efficient photonic structures.