Determination of chloride by stripping chronopotentiometry with silver-film electrode

The experimental parameters of cathodic stripping chronopotentiometry of chloride at a silver-film electrode are investigated and optimized. The chloride preconcentration is achieved in the form of silver chloride by a controlled potential oxidation of the working electrode under vigorous stirring. Cathodic stripping of the deposit is obtained by the constant current, under the condition of diffusive mass transfer. Deaeration of the solution is not necessary. A detection limit of 35 μ dm⁻³ (10⁻⁶ mol dm⁻³) is obtained at a deposition time of 180 s, with a reproducibility of 6.7 % (expressed as relative standard deviation, RSD).     

Development of PE/PCL Bilayer Films Modified with Casein and Aluminum Oxide

The studied samples were prepared from polyethylene (PE) polymer which was coated with modified polycaprolactone (PCL) film in order to obtain bilayer films. Thin PCL film was modified with casein/aluminum oxide compound to enhance vapor permeability as well as mechanical and thermal properties of PE/PCL films. Casein/aluminum oxide modifiers were used in order to achieve some functional properties of polymer film that can be used in various applications, e.g., reduction of water vapor permeability (WVTR) and good mechanical and thermal properties. Significant improvement was observed in mechanical properties, especially in tensile strength as well as in water vapor values. Samples prepared with aluminum oxide particles indicated significantly lower values up to 60%, and samples that were prepared with casein and 5% Al₂O₃ showed the lowest WVTR value.     

Semiempirical versusab initio calculations of molecular properties

A comparative study of the structural parameters in some strained spirohydrocarbons is presented. The theoretical values provided by the STO-3G, MINDO/3 and IMOA methods are in reasonable agreement with each other and with available experimental data offering thus a posteriori justification of the employed approximate schemes.     

Influence of the H/F replacement on the homoaromaticity of homotropylium ion: a GIAO/DFT theoretical study

The problem of homoaromaticity in mono-, di- and polyfluorinated- homotropylium cations is addressed by the B3LYP/6-311++G** DFT method. The energetic, structural and magnetic criteria are used for this purpose. They convincingly show that the ground state equilibrium species are aromatic, or in other words that the homoaromaticity is preserved by the (poly)fluorination. In contrast, a considerable decrease in the aromatic stabilization is observed in the transition structures (TS). According to the NICS(0) index, they vary form strongly antiaromatic, via weakly and non-aromatic to slightly aromatic transition states. However, the hierarchy of the aromaticity in fluorinated homotropylium ions predicted by NICS(0) is completely unrelated to that obtained by using the energy criterion assuming a kinetic definition of aromaticity. On the other hand the latter is closely related to geometric parameters of the equilibrium and transition structures.     

Design and construction of an quasi-adiabatic dissolution calorimeter with a novel dosing apparatus and a low heat capacity

A quasi-adiabatic calorimeter for determining the molar solution enthalpies (Δ_sol H) of non-volatile solids was constructed. The design of the instrument was adjusted to allow the determination of solution enthalpies of small amounts of solids. For that purpose, the novel apparatus for sample dosage with virtually negligible “blank heat” was built. The rather low heat capacity of the calorimeter was achieved by reducing the volume of the reaction cell (20 mL), the dosing unit, and electric elements (the thermistor and the heater). Good thermal isolation of the reaction cell from the surroundings was accomplished by placing the cell into an evacuated polypropylene vessel. A computer program for processing the calorimetric data according to modified Regnault–Pfaundler method was written. The performance of the calorimeter was tested by determining the heats of the reactions serving as thermochemical standards at 25 °C (the dissolution of KCl and NaCl in water and the dissolution of tris(hydroxymethyl)-aminomethane in 0.1 mol dm^?3 HCl(aq)). The obtained data were in very good agreement with the literature values.     

Screening of natural organic volatiles from Prunus mahaleb L. honey: coumarin and vomifoliol as nonspecific biomarkers

Headspace solid-phase microextraction (HS-SPME; PDMS/DVB fibre) and ultrasonic solvent extraction (USE; solvent A: pentane and diethyl ether (1:2 v/v), solvent B: dichloromethane) followed by gas chromatography and mass spectrometry (GC, GC-MS) were used for the analysis of Prunus mahaleb L. honey samples. Screening was focused toward chemical composition of natural organic volatiles to determine if it is useful as a method of determining honey-sourcing. A total of 34 compounds were identified in the headspace and 49 in the extracts that included terpenes, norisoprenoids and benzene derivatives, followed by minor percentages of aliphatic compounds and furan derivatives. High vomifoliol percentages (10.7%-24.2%) in both extracts (dominant in solvent B) and coumarin (0.3%-2.4%) from the extracts (more abundant in solvent A) and headspace (0.9%-1.8%) were considered characteristic for P. mahaleb honey and highlighted as potential nonspecific biomarkers of the honey's botanical origin. In addition, comparison with P. mahaleb flowers, leaves, bark and wood volatiles from our previous research revealed common compounds among norisoprenoids and benzene derivatives.     

A simple adsorptive chronopotentiometric stripping method for determination of vitamin B 1 in pharmaceutical products

A new electroanalytical method for vitamin B1 determination, based on adsorptive chronopotentiometric stripping analysis and non-specific adsorption onto mercury film electrode, was developed and validated. Stripping chronopotentiograms showed a single well-defined oxidation wave corresponding to vitamin B1 at about − 0.43 V in citrate buffer pH 6.0. The most important experimental factors affecting the monitored electroanalytical response of vitamin B1 were investigated and optimised. Under the optimal experimental conditions, linear response of vitamin B1 was obtained in the concentration range of 5–50 mg dm−3, with the achieved limit of detection of 1.64 mg dm−3, and the limit of quantitation of 4.97 mg dm−3. A mean recovery of 97.1% and relative standard deviations of 3.75% were achieved. The developed electrochemical procedure was successfully applied for the determination of vitamin B1 in pharmaceutical products. The results of the proposed method were in good agreement with those obtained by parallel HPLC analyses, confirming an accuracy of the developed method.     

Minimal non-quaternion-free finite 2-groups

We classify minimal non-quaternion-free finite 2-groups which possess a nonmodular proper subgroup.