Nontrivial Solutions for Resonant Hemivariational Inequalities

We study a resonant semilinear elliptic hemivariational inequality. Under some assumptions of strong resonance on the Clarke subdifferential of the superpotential, and using nonsmooth critical point theory, the existence of a nontrivial solution of the problem is shown. This paper has been partially supported by the State Committee for Scientific Research of Poland (KBN) under research grants no. 2 P03A 003 25 and no. 4 T07A 027 26.     

Mercury removal from aqueous solution and flue gas by adsorption on activated carbon fibres

The use of two activated carbon fibres, one laboratorial sample prepared from a commercial acrylic textile fibre and one commercial sample of Kynol^®, as prepared/received and modified by reaction with powdered sulfur and H₂S gas in order to increase the sulfur content were studied for the removal of mercury from aqueous solution and from flue gases from a fluidized bed combustor. The sulfur introduced ranged from 1 to 6 wt.% depending on the method used. The most important parameter for the mercury uptake is the type of sulfur introduced rather than the total amount and it was found that the H₂S treatment of ACF leads to samples with the highest mercury uptake, despite the lower sulfur amount introduced. The modified samples by both methods can remove HgCl₂ from aqueous solutions at pH 6 within the range 290-710 mg/g (ACF) which can be favourably compared with other studies already published. The use of a filter made with an activated carbon fibre modified by powdered sulfur totally removed the mercury species present in the flue gases produced by combustion of fossil fuel.     

On a recursive method for the estimation of unknown parameters of partially observed chaotic systems

We investigate a recently proposed method for on-line parameter estimation and synchronization in chaotic systems. This novel technique has been shown effective to estimate a single unknown parameter of a primary chaotic system with known functional form that is only partially observed through a scalar time series. It works by periodically updating the parameter of interest in a secondary system, with the same functional form as the primary one but no explicit coupling between their dynamic variables, in order to minimize a suitably defined cost function. In this paper, we review the basics of the method, and investigate its robustness and new extensions. In particular, we study the performance of the novel technique in the presence of noise (either observational, i.e., an additive contamination of the observed time series, or dynamical, i.e., a random perturbation of the system dynamics) and when there is a mismatch between the primary and secondary systems. Numerical results, including comparisons with other techniques, are presented. Finally, we investigate the extension of the original method to perform the estimation of two unknown parameters and illustrate its effectiveness by means of computer simulations.     

Alloy formation in mechanically activated mixtures

The physical mixtures of hydroxocarbonates of Cu and Ni with aluminium were activated using a laboratory planetary mill. The chemical reactions and alloy formations as the effects of grinding were followed by the phase analysis of solid products based on the thermogravimetry and X-ray diffractometry. Experimental evidence indicates that the nature of reactions and products of mechanical activation was dependent on the amount of aluminium and time of grinding. This revised version was published online in July 2006 with corrections to the Cover Date.     

Physical Analysis of a Possibility to Reach the 1.30-μm Emission from the GaAs-Based VCSELs with the InGaAs/GaAs Quantum-Well Active Regions and the Intentionally Detuned Optical Cavities

Physical aspects of an operation of the GaAs-based InGaAs/GaAs quantum-well (QW) VCSELs with the intentionally detuned optical cavities have been considered in the present paper using the comprehensive three-dimensional self-consistent optical–electrical–thermal-gain simulation. In GaAs-based structures, very good DBR resonator mirrors and a very efficient methods to confine radially both the current spreading and the electromagnetic field with the aid of oxide apertures may be applied. It has been found using the above simulation that even currently available immature technology enables manufacturing the above devices emitting radiation of wavelengths over 1.20 μm. In particular, while the room-temperature 1.30-μm lasing emission is still beyond possibilities of the InGaAs/GaAs QW VCSELs, these structures may offer analogous 1.25-μm emission, especially for the high-power and/or high-temperature operation.     

Interpolation of Bilinear Operators Between Quasi-Banach Spaces

We study interpolation, generated by an abstract method of means, of bilinear operators between quasi-Banach spaces. It is shown that under suitable conditions on the type of these spaces and the boundedness of the classical convolution operator between the corresponding quasi-Banach sequence spaces, bilinear interpolation is possible. Applications to the classical real method spaces, Calderón-Lozanovsky spaces, and Lorentz-Zygmund spaces are presented. The author is supported by the National Science Foundation under grant DMS 0099881. The author is supported by KBN Grant 1 P03A 013 26.     

Current and shot noise in two capacitively coupled single electron transistors with an atomic sized spacer

The currents and their fluctuations in two capacitively coupled single electron transistors are determined in the limit of sequential tunnelling. Our considerations are restricted to the case when the islands (dots) of the transistors are atomic-sized, which means each of them has only one single electronic level available for the tunnelling processes. The Coulomb interactions of accumulated charges on the both single electron transistors lead to the effect of the negative differential resistance. An enhancement of the current shot-noise was also found. Spectral decomposition analysis indicated the two main contributions to the shot-noise: low- and high-frequency fluctuations. It was found that the low frequency fluctuations (polarization noise) are responsible for a strong enhancement of the current noise. Received 9 October 2001 / Received in final form 8 March 2002 Published online 9 July 2002     

A Characterization of Cosmological Time Functions

A characterization of time functions on a spacetime is made by using theMöbius equation. It is shown that a time function characterized in this wayyields past timelike geodesic incompleteness and local Lorentzian warpedproduct decomposition of spacetime, provided that the stress-energy tensoris a fluid. Also, by imposing additional assumptions on the stress-energytensor and global analytic structure of the spacetime, more restrictivedecompositions closer to Robertson–Walker spacetimes are obtained.