A copper(I) coordination polymer incorporation the corrosion inhibitor 1H‐benzotriazole: poly[μ3‐benzotriazolato‐κ3N1:N2:N3‐copper(I)]

The title complex, [Cu(C₆H₄N₃)]_n, was synthesized by the reaction of cupric nitrate, 1H‐benzotriazole (BTAH) and aqueous ammonia under hydrothermal conditions. The asymmetric unit contains three crystallographically independent Cu^I cations and two 1H‐benzotriazolate ligands. Two of the Cu^I cations, one with a linear two‐coordinated geometry and one with a four‐coordinated tetrahedral geometry, are located on sites with crystallographically imposed twofold symmetry. The third Cu^I cation, with a planar three‐coordinated geometry, is on a general position. Two Cu^I cations are doubly bridged by two BTA⁻ ligands to afford a noncentrosymmetric planar [Cu₂(BTA)₂] subunit, and two [Cu₂(BTA)₂] subunits are arranged in an antiparallel manner to form a centrosymmetric [Cu₂(BTA)₂]₂ secondary building unit (SBU). The SBUs are connected in a crosswise manner via the sharing of four‐coordinated Cu^I cations, Cu—N bonding and bridging by two‐coordinate Cu^I cations, resulting in a one‐dimensional chain along the c axis. These one‐dimensional chains are further linked by C—H...π and weak van der Waals interactions to form a three‐dimensional supramolecular architecture.     

Struvite precipitation for ammonia nitrogen removal in 7-aminocephalosporanic acid wastewater

7-Aminocephalosporanic acid wastewater usually contains high concentrations of ammonium (NH??-N), which is known to inhibit nitrification during biological treatment processes. Chemical precipitation is a useful technology to remove ammonium from wastewater. In this paper, the removal of ammonium from 7-aminocephalosporanic acid wastewater was studied. The optimum pH, molar ratio, and various chemical compositions of magnesium ammonium phosphate (MAP) precipitation were investigated. The results indicated that ammonium in 7-aminocephalosporanic acid wastewater could be removed at an optimum pH of 9. The Mg2?:NH??-N:PO? 3?-P molar ratio was readily controlled at a ratio of 1:1:1.1 to both effectively remove ammonium and avoid creating a higher concentration of PO? 3?-P in the effluent. MgCl?·6H?O + 85% H?PO? was the most efficient combination for NH??-N removal. Furthermore, the lowest concentration of the residual PO? 3?-P was obtained with the same combination. Struvite precipitation could be considered an effective technology for the NH??-N removal from the 7-aminocephalosporanic acid wastewater.     

From Monomers to π Stacks, from Nonconductive to Conductive: Syntheses, Characterization, and Crystal Structures of Benzidine Radical Cations

Salts that contain radical cations of benzidine (BZ), 3,3',5,5'-tetramethylbenzidine (TMB), 2,2',6,6'-tetraisopropylbenzidine (TPB), and 4,4'-terphenyldiamine (DATP) have been isolated with weakly coordinating anions [Al(OR(F) )(4) ](-) (OR(F) =OC(CF(3) )(3) ) or SbF(6) (-) . They were prepared by reaction of the respective silver(I) salts with stoichiometric amounts of benzidine or its alkyl-substituted derivatives in CH(2) Cl(2) . The salts were characterized by UV absorption and EPR spectroscopy as well as by their single-crystal X-ray structures. Variable-temperature UV/Vis absorption spectra of BZ(.) (+) [Al(OR(F) )(4) ](-) and TMB(.) (+) [Al(OR(F) )(4) ](-) in acetonitrile indicate an equilibrium between monomeric free radical cations and a radical-cation dimer. In contrast, the absorption spectrum of TPB(.) (+) SbF(6) (-) in acetonitrile indicates that the oxidation of TPB only resulted in a monomeric radical cation. Single-crystal X-ray diffraction studies show that in the solid state BZ and its methylation derivative (TMB) form radical-cation π dimers upon oxidation, whereas that modified with isopropyl groups (TPB) becomes a monomeric free radical cation. By increasing the chain length, π stacks of π dimers are obtained for the radical cation of DATP. The single-crystal conductivity measurements show that monomerized or π-dimerized radicals (BZ(.) (+) , TMB(.) (+) , and TPB(.) (+) ) are nonconductive, whereas the π-stacked radical (DATP(.) (+) ) is conductive. A conduction mechanism between chains through π stacks is proposed.     

Antibacterial and Synergy of Berberines with Antibacterial Agents against Clinical Multi-Drug Resistant Isolates of Methicillin-Resistant <em>Staphylococcus aureus </em>(MRSA)

Antibacterial activity of berberine (Ber) and 8-acetonyl-dihydroberberine (A-Ber) alone and combined uses with antibacterial agents ampicillin (AMP), azithromycin (AZM), cefazolin (CFZ) and levofloxacin (LEV) was studied on 10 clinical isolates of SCCmec III type methicillin-resistant Staphylococcus aureus (MRSA). Susceptibility to each agent alone was tested using a broth microdilution method and the chequerboard and time-kill tests for the combined evaluations, respectively. The alone MICs/MBCs (mg/mL) ranges were 32-128/64-256 (Ber) and 32-128/128-512 (A-Ber). Significant synergies were observed for the Ber (A-Ber)/AZM and Ber (A-Ber)/LEV combinations against 90% of the tested MRSA strains, with fractional inhibitory concentration indices (FICIs) values ranged from 0.188 to 0.500. An additivity result was also observed for the Ber/AZM combination by time-kill curves. These results demonstrated for the first time that Ber and A-Ber enhanced the in vitro inhibitory efficacy of AZM and LEV to a same extent, which had potential for further investigation in combinatory therapeutic applications of patients infected with MRSA.     

Surface characterization of polyimide films

 Various kinds of poly(amide acid)s were prepared by the reaction of four kinds of acid dianhydride and three kinds of diamine in N,N-dimethylacetamide (DMAc). Polyimide films were prepared by casting the poly(amide acid) solution on soda glass substrates, followed by thermal imidization at various temperatures. Contact angles of polyimide films for the sides in contact both with air and with glass substrate (air side and glass side, respectively) were measured to evaluate the dispersive component (γ^D _S) and the nondispersive component (γ^P _S) of surface free energy (γ_S) of polyimide films. It was shown that, for the air side, γ^P _S value decreased greatly and γ^D _S values increased slightly with the development of imidization. Values of γ^P _S for the glass side were much higher than those for the air side. Poly(amide acid) solution was also cast on quartz glass and silicone rubber, and was thermally imidized. The γ^P _S for the quartz glass side was almost the same as that for the soda glass side. But the γ^P _S for the silicone rubber side was as low as the γ^P _S for the air side. Attenuated total reflection infrared spectroscopy of polyimide films showed that the degree of imidization for the glass side surface was not as high as that for the air side surface, and that the amount of polar groups for the glass side surface was higher than that for the air side surface. Among the various kinds of polyimides, there is a slight but clear difference in the values of γ_S and its components, which can be rationalized from the difference in the chemical structure. It was also found that thermal degradation and oxidation can be easily detected from the change of surface free energy and its components for the polyimide films after being treated at high temperatures in both air and vacuo. Received: 22 January 1998 Accepted: 10 March 1998     

Syntheses,molecular structures and magnetic properties of two hybrid organic–inorganic salts of bis(maleonitriledithiolato)copper(II) and substituted benzyl-4-dimethylaminopyridinium cations

Two new hybrid organic–inorganic salts, [BzDMAP]₂[Cu(mnt)₂](1) and [NO₂BzDMAP]₂[Cu(mnt)₂] (2) ([BzDMAP]⁺ = 1-benzyl-4′-dimethylaminopyridinium, [NO₂BzDMAP]⁺ = 1-(4′-nitrobenzyl)-4′-dimethylaminopyridinium, and mnt²⁻ = maleonitriledithiolate) have been characterized structurally and magnetically. The [BzDMAP]⁺ or [NO₂BzDMAP]⁺ cations (C) and the [Cu(mnt)₂]²⁻ anions (A) in 1 and 2 stack into a 1D alternating CC-A-CC-A-CC column. The Cu···N, π···π, C–H···N, C–H···O, and C–H···S weak interactions play important roles in the molecular stacking and generate a 2D or 3D structure of 1 and 2. The magnetic susceptibilities of these salts measured in the temperature range 2.0–300 K show weak antiferromagnetic coupling features with θ = −2.370 K for 1 and −0.222 K for 2.     

四个天然异戊烯基黄酮的全合成研究

利用温和的方法进行了异戊烯基黄酮(±)-abyssinone-VI-4-O-methyl ether,(±)-abyssinone-IV-4’-O-methyl ether,(±)-abyssinone-V-4’-O-methyl ether和(±)-sigmoidin E的全合成研究,同时通过对羟基苯甲醛的异戊烯基化以及在石油醚中低温结晶的方法合成了关键中间体4-羟基-3,5-二异戊烯基苯甲醛.所有新化合物的结构都经过IR,1H NMR,MS,HRMS确认.     

Concerted Interaction between Pnicogen and Halogen Bonds in XCl?FH2P?NH3 (X=F,OH, CN,NC, and FCC)

We analyze the interplay between pnicogen‐bonding and halogen‐bonding interactions in the XCl? FH₂P? NH₃ (X=F, OH, CN, NC, and FCC) complex at the MP2/aug‐cc‐pVTZ level. Synergetic effects are observed when pnicogen and halogen bonds coexist in the same complex. These effects are studied in terms of geometric and energetic features of the complexes. Natural bond orbital theory and Bader’s theory of “atoms in molecules” are used to characterize the interactions and analyze their enhancement with varying electron density at critical points and orbital interactions. The physical nature of the interactions and the mechanism of the synergetic effects are studied using symmetry‐adapted perturbation theory. By taking advantage of all the aforementioned computational methods, the present study examines how both interactions mutually influence each other.     

Modeling migration of strontium in sand and gravel aquifer in the candidate VLLW disposal site

Study of fine-particle media, because of their high sorption capacities, is of particular importance for the use as backfill materials in waste repository design, and because argillaceous formations are particularly suitable as host rock formations. In this study, sorption and retardation characteristics of strontium in fine-particle media were studied to evaluate the distribution coefficient (K _d ) and retardation factor (R _d ) of this radioactive element in fine-particle media, which was comprised of selected particles with a diameter less than 1 mm from a candidate site to dispose very low level waste (VLLW). The results indicated that K _d values of strontium under different initial concentrations ranged between 20 and 110. Values of strontium R _d measured from column experiments ranged between 36 and 102, with the corresponding K _d values, determined from solving the inverse problem of R _d calculating formula, ranging between 5 and 20. In conclusion, the K _d value of Sr from the batch tests was found to be higher than these from the column experiments.     

Controlling the BET Surface Area of Porous Carbon by Using the Cd/C Ratio of a Cd–MOF Precursor and Enhancing the Capacitance by Activation with KOH

Herein, four new cadmium metal–organic frameworks (Cd–MOFs), [Cd(bib)(bdc)]_∞ ( 1 ), [Cd(bbib)(bdc)(H₂O)]_∞ ( 2 ), [Cd(bibp)(bdc)]_∞ ( 3 ), and [Cd₂(bbibp)₂(bdc)₂(H₂O)]_∞ ( 4 ), have been constructed from the reaction of Cd(NO₃)₂ ? 4 H₂O with 1,4‐benzenedicarboxylate (H₂bdc) and structure‐related bis(imidazole) ligands (1,4‐bis(imidazol‐1‐yl)benzene (bib), 1,4‐bis(benzoimidazol‐1‐yl)benzene (bbib), 4,4′‐bis(imidazol‐1‐yl)biphenyl (bibp), and 4,4′‐bis(benzoimidazol‐1‐yl)biphenyl (bbibp)) under solvothermal conditions. Cd–MOF 1 shows a 2D (4,4) lattice with parallel interpenetration, whereas 2 displays an interesting 3D interpenetrating dia network, 3 exhibits an unusual 3D interpenetrating dmp network, and 4 presents a 3D self‐catenated pillar‐layered framework with a Schäfli symbol of [4³ ? 6³]₂ ? [4⁶ ? 6¹⁶ ? 8⁶]. The structural diversity indicates that the backbone of the bis(imidazole) ligand (including the terminal group and spacer) plays a crucial role in the assembly of mixed‐ligand frameworks. By using the pore‐forming effect of cadmium vapor, for the first time we have utilized these Cd–MOFs as precursors to further prepare porous carbon materials (PCs) in a calcination–thermolysis procedure. These PCs show different porous features that correspond to the topological structures of Cd–MOFs. Significantly, it was found that the specific surface area and capacitance of PCs are tuned by the Cd/C ratio of the MOF. Furthermore, the as‐synthesized PCs were processed with KOH to obtain activated porous carbon materials (APCs) with higher specific surface area and porosity, which greatly promoted the energy‐storage capacity. After full characterization, we found that APC‐bib displays the largest specific surface area (1290 m² g^?1) and total pore volume (1.37 cm³ g^?1) of this series of carbon materials. Consequently, APC‐bib demonstrates the highest specific capacitance of 164 F g^?1 at a current density of 0.5 A g^?1, and also excellent retention of capacitance (≈89.4 % after 5000 cycles at 1 A g^?1). Therefore, APC‐bib has great potential as the electrode material in a supercapacitor.